The wheel bolt pattern on the 2010 Toyota Corolla is A5 X 100 mm. As measured from the edge of one stud to the center of the one directly opposite it, there are five wheel studs spaced 100 millimeters apart. The M12-1.5 wheel stud for the Corolla is 37 millimeters long and has a 14.22 millimeter knurl diameter. M12-1.5 lug nuts with a 19 millimeter hex head and 76 foot-pounds of torque are used to mount the wheels. Work in a crisscross manner while tightening each subsequent lug nut. If the lug nuts are overtightened, the rotor may deform and the wheel may vibrate while you drive. Loose lug nuts may result in the studs breaking and the wheel coming off.
All basic models of the 2010 Toyota Corolla have a bolt pattern of 5 x 100mm.
In This Article...
What is the Toyota Camry’s bolt pattern for 2010?
The bolt pattern on the 2010 Toyota Camry SE is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
Is 5×100 equivalent to 5×114 three?
The only difference between them is that one is measured in inches and the other in millimeters. It’s possible that a set of wheels with the measurements 5×100/5×114. 3 will fit both bolt patterns and have 10 lug holes drilled into the center bore of the wheel to accommodate this.
What automobiles include a 5×100 bolt pattern?
5×100 bolt pattern What automobiles include a 5×100 bolt pattern?
- One Alpine A610 (1991-1995)
- Audi (7) A1 (2010-2022) Citycarver No. 1 (2019-2022) A2 (1999-2005) A3 (1996-2003) S1 (2014-2018) S3 (1999-2003) TT (1998-2006)
- Brilliance (10)
- Buick (1)
- Chevrolet (4)
- Chrysler (8)
- Daihatsu (1)
- Dodge (8)
What size wheels will fit a Toyota Corolla?
The wheel (rim) sizes for the 2021 Toyota Corolla are 18 x 8, 15 x 6.5, and 16 x 7. This is what? For information on the tire requirements for each 2021 trim, see the table below. 18 X 8 in.
Are the bolt patterns on Toyota vehicles uniform?
Although Toyota’s lug designs differ from model to model, the 5×4 bolt pattern is the most prevalent. Knowing your car’s lug pattern is necessary if you want to acquire a second set of wheels or repair a damaged rim.
A 5×114-3 bolt pattern is what?
The stud count (five) and bolt circle measurement (114.3), the notional circle determined by the studs’ centers, make up the 5×114.3 Bolt Pattern or Pitch Circle Diameter (PCD).
Vehicles from Acura, Alpine, Aston Martin, BAIC, BYD, Baojun, and Changan all have the 5×114.3 bolt pattern. The following is a complete list of car makes and models:
What is the estimated lifespan of a 2010 Corolla?
How long do Toyota Corollas last? may be on your mind if you’re thinking about buying one. The Toyota Corolla has a life expectancy of up to 10 years or 300,000 miles with routine maintenance and service. You might own your new Corolla for well over a decade if you take good care of it.
How can I tell which wheels fit my car?
The two simplest methods are to look at your car’s sticker plate, which should be inside the driver-side door, or to search online for the precise make and model of your car’s characteristics. You can get the typical rim size from there.
How much pressure should the tires of a 2010 Toyota Corolla be?
Optimal Tire Pressure You should use different tire pressures for the front and rear wheels of the Toyota Corolla. Utilize the following advice: 38 psi in the front tires. 36 psi in the rear tires.
Are the wheels from Honda and Toyota compatible?
Hello, no, your Honda rims won’t fit on your Toyota Corolla—at least not the OEM ones. The center bore on your Toyota rims is 54.1mm, whereas the center bore on your Honda rims is 56 or 64mm, despite the fact that the bolt pattern is the same. The center hole in the Toyota rims is too small for the Honda hub, thus they won’t fit on the hub.
What is the Toyota Camry’s bolt pattern for 2009?
The bolt pattern for the 2009 Toyota Camry SE is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.