We’ve written in-depth articles about the Toyota Camry and answered a lot of your questions about it. Today, we’ll discuss the knowledge you’ll need to choose the best new tires or rims for your Toyota. We’ll focus on the bolt pattern for each generation in particular. Let’s begin with a brief response:
All Toyota Camry generations built after 1994 feature a center bore of 2.37 inches (60.1mm), a bolt pattern of 54.5 (5114.3mm), and five lug nuts with a thread size of M12 x 1.5 that need to be tightened with 76 lb-ft (103Nm) of force.
That, however, hardly captures the entire picture. For each iteration, we’ve provided a more thorough description of the bolt pattern below. We also go through the individual lugs/bolts used, the center bore hub’s exact diameter, and the bolt torque requirements. Additionally, we have details on the precise tire and rim sizes for each engine type. You should be well aware of what you can and cannot purchase in this manner. Read on!
In This Article...
What is the Toyota Camry’s bolt pattern for 2009?
The bolt pattern for the 2009 Toyota Camry SE is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
What is the Toyota Camry’s bolt pattern for 2021?
The details listed in the table below pertain to your Toyota Camry.
- Nut Bolt Thread Type: A lug nut, lug bolt, or wheel lock’s ability to screw into the wheel stud of your Toyota Camry will depend on the size and pitch of the threads on the nut and bolt.
- Nut Hex Size: The size of the lug nut used on the Toyota Camry is specified in this specification. The nut hex size for all Toyota Camry models is 21.
- The arrangement of bolt holes on a Toyota Camry wheel is known as the “bolt pattern.” 5×114.3 is the notation for a 5 bolt wheel with 114.3 between the two opposing bolt holes.
- The arrangement of channels, sipes, blocks, and grooves on the tread is known as the tread pattern.
- Torque for Lug Nuts: Using a calibrated torque wrench to tighten lug nuts during installation is advised. Although lug nuts can be tightened with a socket or impact wrench, the final tightening should be done with a torque wrench to ensure a precise and sufficient force is applied. depending on the vehicle and type of wheel. To get the recommended torque for the lug nuts, please refer to the table below from our Toyota Camry Wheel Specs section.
- Hub Bore: The machined aperture on the back of a wheel that properly centers the wheel on the hub of your Toyota Camry is known as the center bore. The wheels are perfectly positioned while the lug hardware is torqued down because this hole is carefully cut to fit the hub. The likelihood of a vibration will be reduced if the wheel is placed with exact centering on the hub.
Very Significant! Always consult your car owner’s manual for the most up-to-date information before working on your Toyota Camry wheels.
What automobiles have a 5×114-3 bolt pattern?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
On what size wheels can a Toyota Camry be fitted?
Tire sizes available for the 2020 Toyota Camry are P205/65VR16, P235/45VR18, P215/55VR17, and P235/40VR19. Wheel (rim) sizes for the 2020 Toyota Camry include, but are not limited to, 16 X 6.5, 18 X 8, 17 X 7.5, and 19 X 8.5. The tire specs for each 2020 trim are listed in the table below. 16 X 6.5 in.
What is the 2012 Toyota Camry’s bolt pattern?
The bolt pattern for the 2012 Toyota Camry Hybrid LE is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
The 5×114 bolt pattern is what?
The stud count (five) and bolt circle measurement (114.3), the notional circle determined by the studs’ centers, make up the 5×114.3 Bolt Pattern or Pitch Circle Diameter (PCD).
Vehicles from Acura, Alpine, Aston Martin, BAIC, BYD, Baojun, and Changan all have the 5×114.3 bolt pattern. The following is a complete list of car makes and models:
A 2017 Toyota Camry has what kind of lug pattern?
The bolt pattern for the 2017 Toyota Camry 4cyl LE is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
What is the 2013 Toyota Camry’s bolt pattern?
The bolt pattern of the 2013 Toyota Camry V6 XLE is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
Are the wheels from Honda and Toyota compatible?
Hello, no, your Honda rims won’t fit on your Toyota Corollaat least not the OEM ones. The center bore on your Toyota rims is 54.1mm, whereas the center bore on your Honda rims is 56 or 64mm, despite the fact that the bolt pattern is the same. The center hole in the Toyota rims is too small for the Honda hub, thus they won’t fit on the hub.
What is the Toyota Camry’s bolt pattern for 2008?
The bolt pattern for the 2008 Toyota Camry LE is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.