Bigger is always better, right, if larger lifts and tires result in more lift? Well, it could look good, but the extra cost isn’t always justified. When deciding which kit to pursue, you must consider the terrain your Tacoma will be driving on.
A leveling kit or 2 kit should be adequate for moderate trail use. You might wish to increase the lift to a 3-4 when you enter harsher terrain when the trail is littered with huge boulders and stumps. A 6 lift is significantly more suited when dealing with even bigger challenges, such as full-on rock crawling or anything comparable.
When purchasing big kits like a 6, be sure to pay close attention to suspension travel as well. Longer travel will aid in maintaining the truck’s stability when traversing rocky, uneven terrain.
In This Article...
Which lift kit for a 2018 Toyota Tacoma is best?
best five Tacoma lift kits
- Toytec Boss Suspension System Lift for the Aluma Series.
- Boss Suspension System Lift with 2.5 Coilover and 2″–3″ Lift from Toytec’s Aluma Series.
- (2005+ Tacoma) ICON Stage 10 Full Suspension Systems
- OME Suspension Lift Kit for Tacoma Models 2016 and Newer.
- Elka Suspension-Performance Front and Rear Dual Adjustable Shock Kit.
Does a 2 inch lift impact fuel economy?
Kit for Body Lift That probably won’t have a big impact on fuel economy by itself. However, adding larger wheels and tires does make the elevated vehicle heavier. Even so, we don’t think it will have a big influence on gas mileage.
Should my Tacoma have 33s?
For someone who uses their Tacoma for daily driving but enjoys hitting the trails on the weekends, 33s are arguably the ideal size. Technically, the next size up (275/70R17s) would only increase the tire’s overall diameter by about an inch for a TRD Off-Road.
However, compared to the factory tire size, 285/70R17s (33s) are nearly 2 inches larger. This will give significantly more ground clearance than the factory size tires, and it will also make the biggest visual impact. The nice part is that lifting 33s requires little to no trimming. But without a lift, it’s a little bit different.
With a 2 inch lift in my Tacoma, can I fit 33s?
While it’s not impossible, you will undoubtedly need to cut or trim something in order to fit 33s without a raise. Depending on whether you clear the control arms or not, you ought to be capable of lifting 2-3 pounds.
Although suspension lifts technically do not clear tires for off-road use, they can nonetheless be useful. Your body’s static ride height is altered when you lift your truck. For instance, while driving every day, you might not rub, but when driving off-road and stuffing that tire into your wheel well, you almost certainly will. This rubbing would be significantly harsher both on and off the road without a lift.
In response to the infamous query, no raise is necessary to accommodate 33-inch tires on a factory Tacoma; other modifications may be necessary, such as fender liner pushback, CMC (cab mount chop), rocker panel cap trimming, fender trimming, body trimming, etc. Having said that, you can still bolt the wheel and tire to your hub; you may simply need to perform some trimming. Something needs to give since even when you grow taller, the inner fender’s size remains constant.
In order to determine exactly what needs to be trimmed, we will place 33 tires on a stock, third-generation Tacoma without the use of a lift. Snail Trail 44 will shortly donate that truck.
Realize that it’s crucial that the tires under your Tacoma don’t rub, regardless of the size you choose. If they continue to rub and you don’t fix the problem, eventually you’re going to destroy something or rip something off.
Our up/down travel on the Bilstein 5100 kit 2.8 front with Icon Add a Leaf 2 rearit has cleared everything fairly well after mounting, operating, and flexing it. Following tire installation, there were NO general on-road rubbings on the fender liners or fender well. That included the curb drop test as well as full-lock reverse. The tires cleared the pavement fully.
Driving off-road is a little bit of a different situation. Even driving on a bumpy dirt road wasn’t too difficult, although when the tires were jammed into the wheel wells, they did rub a little. It wouldn’t take much cutting at all to completely clear 33s since they hardly ever rub on the inside of the fender close to the pinch weld.
Lift kits—do they pose issues?
Getting experience is difficult, particularly when it comes to welding. Also,
When used appropriately, a lift kit produces issues of its own:
- Raising
- Adding
- Finally,
What does a decent lift kit cost?
As was already indicated, the price is strongly influenced by the kits you choose. The two main kits are perfect for lifting a truck, but due to their different roles and needed sizes, they range widely in price. Because they can raise any body section of a car, lift kits typically cost more than leveling kits.
- The cost of common leveling kits normally falls between $200 and $1,000.
- Higher scale lift kits often cost $10,000 to $15,000 and can raise a truck by six inches or more.
- Lower scale lift kits typically range in price from $400 to $12,000 and can raise a truck by two to five inches.
How much does a lift kit installation cost at a shop?
If you install the kit yourself, ordering and installing a lift kit can easily cost between $400 and $4,000 depending on the size of your lift. If you work with a pro, it might cost between $800 and $8,000 per hour.
What about Bilstein Lift Kits?
One of the top aftermarket producers in the automotive aftermarket, in our opinion, is Bilstein. They don’t just make high-quality aftermarket shock absorbers; today, Original Equipment (OE) automakers use them to make OE shock absorbers for vehicles right out of the factory.
Every day, either as a maintenance or upgrade solution, our Fulcrum Suspensions shop network installs Bilstein shock absorbers. Our custom-built 4×4 raise kits, which are made using Bilstein shock absorbers, are our most popular suspension solution.
Bilstein shock absorbers have been marketed by Fulcrum Suspensions since their launch more than 40 years ago! In addition to making sure that their stores are always stocked with Bilstein products, Fulcrum Suspensions has the confidence to endorse Bilstein to their clients because of the long-standing relationship between the two firms.
Toyota produces lift kits, right?
Toyota Racing Development now offers a suspension lift option for Tacoma owners with models that are 2020 and newer (TRD). The new Tacoma TRD Lift Kit is now accessible nationwide as a dealer-installed option, offering most 44 Tacomas with V6 engines a front lift of up to 2 inches and a rear lift of up to 1 inch.
How should my Tacoma be raised?
The Tacoma’s rear suspension is a lot simpler than its front suspension. Leaf springs support the weight and support the solid rear axle. Using a lift block, add-a-leaf, or replacement lift spring will raise the rear suspension. To provide lift, lift blocks install between the leaf spring and axle, and they also call for larger, longer u-bolts. A leaf with more arch and a greater spring rate is added to the pack using an add-a-leaf, which necessitates the removal and disassembly of the leaf spring back. Both of these alternatives are reasonably priced, and if a higher lift height is requested, they can even be combined. Full replacement leaf packs, like those sold by Old Man Emu, provide additional height in addition to a smoother ride thanks to the use of diamond-cut leaf springs and Telfon sliders. To match the higher ride height, remember to get longer shocks if you lift the rear more than one or two inches.
Replacement leaf springs cost more than utilizing a lift block or an add-a-leaf, but they also have more benefits, such as better ride quality and weight bearing capacity. Old Man Emu springs feature a two-stage construction for comfort with military covers on the eyes. The vehicle mostly rides on the primary stage when it is empty, with the secondary stage adding extra support when a heavy load is added.
You will need to adjust the cab mount if you are using tires that are taller than 33 inches or wheels with an extremely shallow backspacing to ensure sufficient clearance. The cutting is simple, but to preserve the mount’s strength and integrity, you must box it back in. If you are not comfortable with welding, it is advisable to leave this task to the professionals at 4 Wheel Parts who frequently carry out cab mount chops.
How durable are lift kits?
Superlift kits are meant to last for at least ten years. Although a lot of models endure a few more years, it’s impossible to predict how long a given lift kit will last. As was already indicated, regular maintenance will enable your Superlift lift kit to perform significantly better than expected.
Do lift kits render insurance void?
- Do elevated trucks have higher insurance rates? Yes, to answer briefly. In essence, any alterations made to a car will ultimately raise its worth. Therefore, if you make adjustments, your insurance will probably cost more. Lift kits and other modifications require a policy endorsement in addition to standard auto insurance in order to be covered.
- A elevated truck will be insured by who?
- The majority of insurance companies won’t provide any coverage for lifted trucks or customized cars. In the case of a claim, working with an agent who specializes in lifted and modified vehicles is crucial.
- Do lift kits render insurance void?
- Insurance is not void due to a lift kit. Nevertheless, you must inform your insurance company of any modifications, including lift kits, in order to get the right policy endorsement and have enough coverage. You run the danger of not having enough coverage if you do not let your insurance carrier know about modifications, including lift kits. Additionally, if the insurance provider is not aware of the changes prior to the claim, damage to certain elements of the vehicle may be attributed to them.