Toyota included a 245/60R20 tire with the 2012 4Runner Limited.
In This Article...
What tires do 4Runner Limited come with?
P245/60R20 tires are mounted on 20-inch wheels with the Limited trim. The OE tire for this trim is either the Yokohama Geolandar G96B or the Bridgestone H/T D684.
How long do 4Runner standard tires last?
How durable are tires on a Toyota 4Runner? To extend the life of tires, only proper maintenance and care are required. Roswell’s Nalley Toyota is here to help. An average tire’s tread will wear out in roughly 3 years if you maintain your current driving habits and log 12,000 to 15,000 miles annually.
Are the 4Runner’s factory tires suitable for snow?
The factory-installed mud-and-snow tires on the Toyota 4Runner are made to withstand challenging winter driving conditions. Compared to conventional tires, the M+S tires offer superior traction and stability when driving on ice-covered roads or through deep snow.
Toyota 4Runners: Do they come with full-size spare tires?
True, there is a full-size spare tire on the Toyota 4Runner. However, the spare tire won’t fit if you install alternative tires on your 4Runner, so you should temporarily use the other one.
Off-roading can be dangerous, therefore it’s helpful to have a full-size spare tire. You can be confident you’ll have something more sturdy to return to the main route.
Is there a locking differential on the 4Runner Limited?
The 4Runner’s optional electronically controlled locking rear differential equally distributes engine power to both rear wheels so they drive at the same speed, even if one is off the ground, to help you navigate rocky terrain.
How long do tires last?
There is no definitive way to predict how long a specific tire will survive, but there are steps a driver can take to maximize their tire investment and steer clear of using dangerous tires. People typically travel between 12,000 and 15,000 miles each year, therefore the average decent all-season tire will last between three and five years, depending on upkeep, driving habits, and other factors.
According to the National Highway Traffic Safety Association (NHTSA), drivers are three times more likely to be involved in accidents involving damaged tires. When it comes to the condition of tires, safer is wiser, so if there is ever any doubt about tread wear or age, have the tires inspected.
How can I extend the life of my 4Runner?
How to Get 200,000 Miles Out of Your 4Runner
- Don’t cut corners when serving. The procedure is well known: Replace the spark plugs, plug wires, air filter, oil, and filter, as well.
- Ignore warnings/trouble codes at your peril.
- Take Care of Your Cooling System.
- Know the maintenance schedules for all parts.
- Equip Your 4Runner With the Right Gear.
How far can a 4Runner go before breaking down?
You might get 300,000 miles out of a Toyota 4Runner. Some drivers desire more, even though a Toyota 4Runner with 200,000 miles on it is amazing.
Use the Tread Wear Bars
Tread wear bars are currently included on every tire sold in the US. You can see how much tread is remaining on your tires thanks to the tread wear bars. These wear bars are little, elevated rubber bars in your tire’s grooves. These bars can be seen running between the tread blocks if you look at the tread pattern.
These bars can be seen running between the tread blocks if you look at the tread pattern. These bars will become closer and closer to the tread as your tires deteriorate. It’s critical to have new tires before this occurs.
You might think about buying new tires before they come to that point depending on where and how you drive as well as the circumstances you encounter on the road. You might be able to wait to replace your tires until they are closer to the tread wear limit if you are only doing light city driving. You might need to replace your tires sooner if there are more severe weather conditions, such rain, snow, and unpaved roads.
Do the Penny Test
The penny test is a quick and simple way to assess your tires’ tread depth. Lincoln’s head on a penny should be inserted into a tread groove. It’s time to change the tire if you can see Lincoln’s entire head from it.
Your tires are often thought to be safe and do not require replacement if the penny penetrates the tread to a depth that is at least equal to that of Abraham Lincoln’s forehead. When doing the penny test on your tires, examine all four of them.
Ready to Find the Perfect Tires?
Your next pair of tires can be found at Les Schwab. Additionally, you may discover our top-notch customer service at a tire store close to you that values your safety on the road.
Why not purchase a Toyota 4Runner?
1. Low Fuel Efficiency
Any SUV rarely offers outstanding fuel economy, but the Toyota 4Runner does particularly poorly in this area. Its combined fuel efficiency is only 17 miles per gallon. On the interstate, you might get up to 19 miles per gallon at best. Even for cars of this class, this is below average.
2. Unacceptable Ride Quality
Based on a truck basis, the 2021 Toyota 4Runner drives and feels like a truck. The ride might be rough, uncomfortable, or downright unpleasant. In their SUVs, a lot of automakers have made significant improvements. Unfortunately, this isn’t the case with Toyota’s 4Runner.
3. Uncomfortable Entry and Exit
The Toyota 4Runner from 2021 is elevated. With larger SUVs designed with off-road capabilities in mind, this is to be anticipated. The 4Runner’s off-road skills are aided by its considerable ground clearance. Unfortunately, this can make getting in and out of the car a little difficult.
When should I utilize my 4WD 4Runner?
All generations of 4runners shared a common type of part-time 4WD. It was an antiquated kind of 4 wheel drive on the first and second generation cars, with either manual locking hubs or a technology known as Auto Differential Disconnect.
The front driveline continued to spin and wear even while the front differential is disengaged because of this mechanism, which essentially detached the axles from the front differential but enabled them to spin freely with the wheels.
When to use each 4WD setting in a 1st and 2nd gen 4runner
Except while driving in slick weather, you should always be in 2WD. Change to 4hi if you need extra traction. Due to the fact that the front and back are equally locked, 4HI should not be used on dry ground. This could damage the driveline by causing binding in the driveline.
A 4lo setting is available on all 4WD 4Runners. This modifies the gearing to allow the car to go at a sluggish rate. Only use 4lo to climb or descend steep hills, assault sizable rocks, or extricate a stalled vehicle.
How to engage 4WD in a 1st or 2nd gen 4runner
Get outside, lock your hubs, and then switch to the 4hi position. (Shift to the 4hi setting if your 4runner doesn’t have manual hubs.)
Put the transmission in neutral, then shift to the 4lo position while coming to a stop.
How quickly does a 4Runner travel in 4 high?
Drive four wheels (4H = four high) You must be moving at a pace of no more than 55 mph in order to enter 4HI. To engage 4HI on the 4Runner TRD Off Road, you only need to pull back on the transfer case lever. Again, you can do this while driving, but you should keep your speed under 55 mph.
What is the diameter of a 265 70R17 tire?
The section width of a 265/70R17 tire, which measures the width of the tire from its inner to its outer sidewall, is 10.4 inches. The largest size of wheel that can accommodate the tire’s mounting is one with a rim diameter of 17 inches. The distance between the wheel rim and the top of the tire tread is measured as sidewall height, which is 7.3 inches (186 mm). The tire’s outside diameter is represented by the overall diameter of 31.7 inches (804 mm), which also denotes the height of the tire. The tire’s outer perimeter measures 99.5 inches (2524.6 mm) in circumference. The number of tire rotations represents how many times a tire turns when traveling a given distance in miles or kilometers. the 265/70R17 tire rotates at 637 miles per hour.
How many inches are in 285 70R17?
The comparable measurement in inches of 285/70R17 is 32.8×11.2R17. To help you comprehend, let’s break down the tire size dimensions. The section width, or tire tread width, is 11.2 inches, or 285 mm. The overall diameter of the tire, or tire height, is 32.8 inches, or 832 mm. The maximum diameter of the wheel that a tire can be put on is 17 inches.
Which wheels are best for a 4Runner?
Another luxurious wheel that is a hot seller for practically any truck, notably the 4Runner.
You might fall in love with this on your 4Runner if you like the deep dish design and the milling finish.
Full suspension lift by Pro Comp of 6-7 inches, headlights, fog lights, raptor lights, roof rack, sliders, ceramic coating, and wheel lights. 20×10 Ultra Hunter with a -25 offset are mounted on this 2015 Toyota 4Runner. Gladiator Qr9000-mt tires measuring 33″ x 12.5″ are mounted on these rims.
The wheel size possibilities for the Ultra Hunter, which range from 17×9 to 24×12, can make or break an enthusiast’s build. You won’t have any trouble selecting the size that is ideal for your build if these rims caught your eye.
Satin Black, Chrome, and Gloss Black are the only colors currently available; all three are excellent choices for practically any build. More importantly, the Ultra Hunter is an incredibly inexpensive truck wheel, with sets starting at just $824.
It’s vital to note that the only choice available with the machined appearance on the wheel is gloss black.
We have seen the Ultra Hunter on every conceivable type of build, whether it be an off-road build or a display truck. The button below will take you to our review if you want to learn more about this wheel.