The 2016 Toyota Tacoma has been redesigned and given new life, and drivers will benefit from a broad list of cutting-edge innovations. The best-selling midsize pickup vehicle has a new electronically controlled transmission that has its own benefits. The improved transmission’s ECT PWR feature allows it to deliver short bursts of power when necessary. Check out this quick review to learn more about the advantages of the Toyota Tacoma ECT PWR button and how it functions.
In This Article...
What is the Toyota Tacoma ECT PWR Button?
The ECT PWR button is a feature of the newly built transmission, which stands for electronically controlled transmission. The ECT PWR button, when depressed, modifies shift points so you can increase RPM before changing to the next gear. In order to work the clutches and bands inside the transmission, this novel feature uses a hydraulic system that is managed by an electrical solenoid. The ECT PWR feature will give you more control over your speed and improve control when it’s in use.
What is the purpose of ECT power?
When you need to pass another car on the highway or when you need to haul a large load, the ECT PWR button provides the ideal boost in power. The ECT PWR button also provides a useful power boost while merging into heavy traffic or climbing a steep hill with a trailer.
Is tow haul and ECT power equivalent?
There is no turbo boost button on the ECT PWR. In actuality, it has no effect on your car’s power at all. It is merely a tow-haul mode button that can be utilized when towing a trailer, hauling a big load, or navigating mountainous terrain with hills. That essentially means that it slightly raises the transmission’s shift points, causing the engine to rev to a slightly higher RPM before moving on to the next gear. This makes sure that when the vehicle is under pressure, it won’t lug as the next gear engages.
I called my dealership and Toyota to ask for the real RPM values, but regrettably, as of this writing, they were unable to provide them. The Toyota customer support representative acknowledged that some drivers utilize the ECT PWR button when they need to accelerate quickly, such as when using frontage road ramps to access the freeway or when legally racing their car. However, I used my iPhone’s stopwatch to time both with and without the ECT PWR activated on my 2016 Tacoma (TRD Off-Road 44). Actually, the difference was slower by half a second.
We can be certain that using the ECT PWR mode will result in lower gas mileage. Although the exact number is unknown, I believe a few miles per gallon wouldn’t be too far off. Therefore, I wouldn’t advise always using it in ECT PWR mode.
Please add any further information you may have about the inner workings of ECT PWR mode in the comments section below.
When ought I to employ ECT snow?
There is a little button that drivers can press to help start their car more easily in icy circumstances on almost all Toyota and Lexus vehicles, as well as select models from other manufacturers. Find that button quickly before Smowmageddon strikes.
Look examine your gear shift lever first if you drive a Toyota. You can find a button with the names “Snow” or “ECT Snow on many automobiles. That tiny button will modify your transmission’s operation in snowy or icy circumstances, making it easier for you to start. The car just starts out in second gear as opposed to first thanks to the transmission. Any Toyota or Lexus owner who uses it will tell you that it is effective.
The button is concealed by Lexus and other manufacturers. It is frequently hidden from view under the steering wheel on Lexus IS and GS automobiles. If you’re having issues, consult your owner’s manual. Some cars activate this function via the trip computer’s system settings. Use the “ECO mode if your car has one if it doesn’t have a “Snow button. Eco modes merely lower the throttle, which is beneficial in snow.
Last but not least, if you see that tiny button with the car swerving and a “Note the off button on it. The capability of traction and stability controls to “Putting the car in drive and lightly applying the gas, then shifting to reverse and lightly applying the gas again allows you to use the transmission to rock the vehicle back and forth when stuck. Sometimes moving the car forward and out of a rut requires swaying the vehicle. Good fortune!
When ought I to apply ECT power?
With this system in place, you’ll get access to a quick power boost at the touch of a button that will be useful to you in specific driving circumstances. The ECT PWR feature is conveniently accessible while driving because it is situated directly below the Toyota Entune interface. An ECT PWR dashboard indicator light turns on to warn you when it is enabled. To reverse the operation and exit power mode, merely press the ECT button a second time.
When Should You Use the Toyota Tacoma ECT PWR Button?
You might still be unsure of when to make use of the Toyota Tacoma ECT PWR button even after gaining a better understanding of how it operates. The ECT PWR button works similarly to the 2016 Toyota Tundra Tow/Haul Mode and is best used when you need an extra boost of power when towing. The ECT PWR will also be helpful when merging with freeway traffic, overtaking vehicles on the highway, or ascending steep terrain. It is crucial to remember that prolonged use of the power mode will result in reduced fuel efficiency ratings.
Can you use tow haul while operating a vehicle?
Best wishes on your newest trailer! Nothing compares to the excitement of completing the papers and getting to take your newest toy home.
Tow haul can be activated while driving, but it may not be essential. Every time you activate your car’s tow haul option, your engine is practically shifted into a lower gear, making it simpler for you to stop or brake when necessary.
However, you should be aware that your car will travel at a higher RPM, which will ultimately decrease your fuel economy. As a result, your car will burn more fuel to make up for the loss of traction.
So, this is what I advise. You may not notice much of a difference if tow/haul mode is on or off while traveling on a highway, so turn it off for better gas mileage. But go ahead and turn it on if you’re traveling uphill or downhill.
It’s crucial to confirm you have the appropriate auto insurance coverage with your new trailer in tow. There is no need to overpay, though.
Jerry is a free insurance price comparison software that searches more than 50 insurance providers for the best deals. You will receive quotes immediately, and agents are always a text message away if you ever have any questions. The typical user of Jerry saves $887 annually on auto insurance.
How does tow haul mode work?
Since there is no genuine need to use the Tow/Haul mode on the highway, it is not required. Even if you predict that you’ll be driving at the same pace for a long time, employing the Tow/Haul mode will simply result in you using more fuel and revving your engine harder.
Depending on the make and model of your car, the tow haul button may be found to the right of the steering wheel or at the end of the gear stick. Several important details:
- Simply click the trailer tow button one more to turn it off.
- To compensate for a heavy trailer or cargo, use the button whenever you require more pulling, braking, or turning force.
- You’ll notice that the system retains lower gears for a longer period of time when accelerating or decelerating when in Tow/Haul mode. On mountain roads, you’ll see it even more clearly. Additionally, Tow/Haul mode improves engine responsiveness and adds engine brakes to aid in reducing vehicle speed.
- When you do, the speedometer’s lower half will display the trailer drag indicator.
What exactly is the Tow/Haul mode and when to use it?
With the Tow/Haul mode selected, your car will move in a lower gear, allowing the engine to brake in addition to the brakes to slow down. If you require greater stopping power, traction, or power steering to adjust for a big trailer or load, we advise pressing it whenever necessary.
When accelerating or decelerating, the system will retain lower gears for a longer period of time if the Tow/Haul mode is engaged. However, as we previously mentioned, it won’t do much on a highway. You will be able to notice it considerably more on long hills and mountain roads.
The Tow/Haul mode’s primary objective is to improve engine responsiveness and provide more engine brake force to aid in vehicle braking.
Be cautious when towing when the Tow/Haul mode is on.
- Follow the posted speed restrictions, especially when descending.
- Use only the two right lanes in parts with more than two lanes, even while passing.
- Watch out for the wind, which can cause your car and whatever you’re towing to become unstable.
- You must maintain a distance of at least 50 meters (165 feet) from the vehicle in front of you if the “car-caravan assembly” is longer than 7 meters (23 feet).
What type of driving is ideal in the snow?
When necessary, all-wheel-drive systems automatically apply torque to all four wheels or deliver power to all four wheels simultaneously. All-wheel drive is therefore recommended for navigating icy and snowy routes.
Know your vehicle
When it comes to cars, acronyms might be complicated, but it’s crucial to understand which systems your vehicle has. This has an impact on how well you can maneuver your car on ice and snowy surfaces. Some safety features rely less on the driver’s input. Knowing whether your vehicle has ABS (Anti-Lock Braking), TC (Traction Control), and ESC is crucial in the snow and ice (Electronic Stability Control). Note that depending on the manufacturer, ESC may go by multiple names. VSC (Vehicle Stability Control), ASC (Active Stability Control), DSC (Dynamic Stability Control), and ESP are examples of possible variations (Electronic Stability Program). Effectively, they are all attempting to get the same result. Regarding managing a skid, see the topic below.
Increase following distance
Drive-safely.net advises increasing the following distance to 6 seconds during inclement weather. Additionally, they advise that the following distance be at least 10 seconds long in extremely icy situations.
Use momentum
After halting, regaining traction might be challenging. For instance, if you’re driving in the snow up a steep hill, your wheels will start to spin if you press the pedal firmly. Losing momentum could result from this. Utilize the momentum, inertia, and torque already generated to maintain momentum.
One movement at a time
The Bridgestone Winter Driving School advises performing one movement at a time while utilizing all of the available grip. You can use all of the available grip for steering by releasing the brake before entering the curve. Only begin to accelerate until you can straighten the wheel at the end of the turn.
Do not use cruise control when driving in snow
In slippery, icy, or snowy circumstances, using cruise control could cause traction to be lost. The vehicle may end up accelerating through a puddle or snow since the cruise control will attempt to maintain the speed set. This can result in losing stability and control.