On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.
In This Article...
What is the reason for the Toyota maintenance necessary light?
- Press and hold the ODO reset / readout button while the engine is off.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- If the car is on, turn it off.
- Now the light will read “MAINT REQD.”
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- The ODO display will briefly flash before beginning to display only zeros.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
What should you do if your Toyota indicates that maintenance is needed?
How to Turn Off the Toyota Service Light
- As soon as you are ready to start your car, insert your key into the ignition and turn it to the first position.
- Turn your key to the second position after pressing and holding the trip meter reset button on the dashboard.
- Hold the odometer button down for a total of 10 seconds.
How can I turn off the Toyota maintenance is required light?
Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
What might the phrase “maintenance required” mean?
Even the smallest elements, like dashboard lights, give each car a unique look. Knowing what each light indicates and what to do when one comes on might be challenging. While some lights are merely warnings, others are critical and must not be disregarded. By addressing the query, “What does it signify when the maintenance light is blinking in my Corolla?,” we hope to assist you better understand your Toyota warning lights.
What does the maintenance required light mean?
Other automakers don’t offer a dashboard light like the maintenance required light, which is present on Toyota automobiles (MAINT REQD). Many new Toyota drivers could mistakenly believe that this light is the check engine light, but it actually represents a completely different warning. According to the distance travelled on the vehicle’s maintenance plan, the maintenance required light alerts you that repair is necessary.
Even though my automobile says maintenance is necessary, can I still drive it?
Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.
This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.
To manually reset the system to turn off the light, however, follow these instructions:
When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.
Is it safe to operate a vehicle when the maintenance light is on?
Every 5,000 miles, this light automatically comes on as a reminder for you to replace the oil in your automobile. You can still use your automobile safely while the light is on in your dashboard because the light itself does not indicate that your car has been damaged.
How soon after the maintenance necessary light do you have?
The maintenance required light will illuminate for approximately six seconds each time you start the vehicle to test the bulb before turning off. After 4,500 miles, a flashing maintenance required light turns on.
Why does my maintenance light come on after I change the oil?
The maintenance required light: what does it mean? The maintenance required light serves as a reminder to drivers that their vehicle requires maintenance. Since automakers typically advise routine maintenance after 5,000 miles, it activates at those intervals. Every 5,000 miles, there is an oil change, filter replacement, and inspection.
Does the need for maintenance equate to a check engine light?
Some motorists could mistake the check engine light for the service or maintenance necessary light on the instrument cluster. These alert lights are not connected. The service required light simply indicates that the vehicle needs an oil change or other standard maintenance.
What happens if the oil isn’t changed?
In an engine, oil that has not been changed in a while will start to gel or solidify, finally becoming sludge. This will prevent the oil from getting to all areas of the engine, starving the crankshafts, bearings, camshafts, and other portions of the valve train of oil.
How frequently should oil be replaced?
While it used to be customary to change the oil every 3,000 miles, modern lubricants now allow for suggested oil change intervals of 5,000 to 7,500 miles in the majority of engines. Additionally, your car’s engine might go up to 15,000 miles between maintenance if it needs complete synthetic motor oil.
Can I just add oil rather than replacing it?
It is normally not advised to top off your oil until the level is below the minimum level. However, topping off your oil can help you get to your local Firestone Complete Auto Care for an oil change if you’re running low on it.
You must use the viscosity and grade of oil specified in your owner’s manual if you decide to top off your oil. Turn off your car and let the engine cool before adding oil. Take off the oil filler cap and add a little oil at a time. Start by adding modest amounts at a time, and check the oil level often while filling. Overfilling might harm your engine.
Check the dipstick once more after waiting about a minute for the oil to sink to the bottom. Add more oil and keep checking until the level is between the minimum and maximum marks if the oil level is still below the minimum mark. Once you firmly twist the filler cap back on, everything is ready.
Can I Top Off Oil In a Hot Engine?
Avoid adding oil to an engine that is already hot or running. In addition to the fact that the oil level will be slightly higher due to the heat, spilling oil over a hot engine could result in smoldering or even a fire. Turn off your automobile and wait a few minutes (to let the engine cool) before continuing if you intend to top off the oil.
Once more, topping up the oil does not serve as a substitute for a full-service oil change. You’re always better off spending money on routine, professional maintenance services because neglecting to change your oil might be a really perilous business.
What is the price of an oil change?
Depending on where you live, an oil and filter change using standard oil will typically cost between $35 and $75. You should expect to pay extra (anything from $65 to $125) if your automobile needs synthetic oil, but you can offset some of the expense since synthetic oil lasts longer and needs to be changed less frequently.
What does a check engine light that is solid yellow indicate?
After a long day at work, you get into your car and look forward to an adventure on the open road. However, as soon as you turn the key in the ignition, a bright yellow check engine light appears on your dash. Be composed. The indicator light serves as a warning, but it doesn’t always signify that something significant is wrong.
What the check lights are communicating to you.
To monitor what is happening inside your car, the onboard diagnostic system interacts with various components of it. A warning indicator light is sent to your dashboard when there is a problem with the electronic control system to let you know there is a problem. Depending on how the light appears on your dashboard, you can determine whether it’s a serious or minor problem.
It’s not usually a significant problem, but the constant yellow light is alerting you to take a look and solve the small problem as soon as you can. The engine of your car is misfiring if the light is flashing, therefore you need to look into the issue right away. If you don’t think it’s safe to drive, you don’t need to stop immediately away. However, you run the risk of damaging the engine of your car if you ignore the bright or flashing light. If your engine light illuminates, we advise performing the actions listed below.
Three steps to take when your engine light is on.
When your engine light comes on, one of the first things you should check is your gas cap. Look to see whether your gas cap is damaged, cracked, or loose. Ensure that your gas cap is tightened if it is not. Replace your gas cap immediately if it is damaged. The fuel must not evaporate, of course.
2. Look for overheating or low oil pressure.
Check your gauges and lights for signs of low oil pressure. If your signal light is flashing, you might need to slow down and stop towing. When something like this happens, you must carefully pull over and quickly dial a tow truck.
3. Make a Consultation.
Make an appointment with an automotive expert if you thoroughly examined your car but the problem is still unidentified or you are unsure of how to fix it.
Keep your day from being ruined by that unexplained check engine light. To help you identify the issues with your automobile and get you back on the road so you can get on with your adventure, our team of professionals is here.
Amber engine management light
The least serious light is an orange or amber one. If this light turns on and stays on, you should be able to continue driving normally, but you should take your car to a garage as soon as you can to have it looked at.
Flashing engine management light
An engine misfire, for example, would be a problem indicated by a flashing orange light on the dashboard. Your automobile may start to tremble, or the engine sound may change unexpectedly. If this light appears, you ought to take your automobile in for an inspection right away.
Red engine management light
There is a very serious issue when the engine management light is red. If you notice this, you need to pull over as soon as possible somewhere secure and contact your breakdown service.