A CR2032 battery, which you can get in shops and online, is used by the majority of Toyota models. These batteries are really inexpensive, usually costing less than $5. Replace the battery in your Toyota key fob within the casing, then cap it off.
In This Article...
The battery in my Toyota key fob has to be changed.
How to Replace the Battery in a Toyota Smart Key
- To remove the key cover, use a flathead screwdriver or a key.
- Battery Cover should be removed.
- Get rid of the dead battery.
- Place the Plus+ Side Up while installing the new battery.
- Put a new battery cover on.
- Switch out the key cover.
- Examine the key fob.
What kind of battery does a key fob from 2018 use?
For many Toyota cars made between 2000 and 2017, this Toyota Key Fob Battery Replacement is an OEM alternative. For vehicle fitment, please refer to the list below. Replace the original battery from your key fob, keyless entry remote, or remote key with this Energizer CR2032 3v Lithium Battery. The highest quality components are used to create Energizer key fob battery replacements, giving you a battery that lasts forever. Make sure the old battery in your car’s remote key or key fob has a 2032 number. The battery number for your key fob, keyless entry remote, or remote key can typically be found on the back cover if it is not in your remote. The reason why Energizer key fob replacement batteries are superior to original equipment batteries is because manufacturers frequently employ lower-quality products or batteries to cut costs and entice you back into the service department where they can profit more from you, the customer.
All Energizer batteries have a long lifespan and are constructed using the best components available. The dependable power you have come to expect from major international brands like Energizer is provided by these specific application batteries. Since Energizer is the most popular battery among automotive car audio specialists, you can be confident that it is a battery you can rely on.
- Size: 2 x 20 x 20 (mm).
- 3.0 Volt
- IEC: D2032
- 10 years of storage guarantee.
- three levels of corrosion defense
- superior lithium
- 220 mAh
Numerous Toyota vehicle models can use the Energizer Key Fob CR2032 battery. the list of Toyota vehicles that this key fob battery fits is as follows:
Fits the following vehicles:
- Fits Prius Models from 2004 to 2008
- Suitable for Matrix Models 2003 to 2008
- Fits the Sequoia Model from 2009 to 2016
- models of Tacoma trucks from 2004 to 2008
- Fits models of Tundra trucks from 2008 to 2009.
- Suitable for Sienna Models 2003 to 2017
- Fits 20092017 Highlander models.
- models of the Corolla from 2004 to 2008.
NoteThis is the proper battery if you have any other Toyota model vehicle with 2032 on the back of the remote.
The more recent style 3 or 4 button combo key/remote, which uses a CR2016 battery, DOES NOT FIT this battery.
Generally speaking, this battery is used in most Toyota vehicles from 2012 and above that have smart key fobs. This battery is a 2032.
The number is stamped on the battery of your key fob, so if you’re not sure for sure, just open it with a small screwdriver.
For the Keyless Entry Remote/Keyfob on your Toyota, these batteries are the ideal OEM replacement. The Battery that never stops working. Avoid being shut out by choosing inferior, less expensive brands!
What kind of battery does my key fob need?
Batteries are used by key fobs. While the key fob battery is not required to start your car, it is required for any keyless entry or remote functions that come with your vehicle. The battery must be replaced when it runs out of power. Following these instructions will enable you to replace the battery in your key fob:
Open Your Key Remote Fob
Typically, a micro screwdriver or the yellow watch opening tool shown below are needed to open the key fob. To open the remote control, use the flat head or the yellow tool, or use the micro screwdriver to remove any screws from the key fob’s rear.
Determine the Battery Type
Look at the battery within the remote after opening the key fob; it will typically have numbers printed on it, such as 2032, 2025, or 2016. Make sure to decide whether the battery should have its positive side facing up or down.
Replace the Battery
Replace the old battery with the new one now. Place the battery properly, making sure the positive side is pointing in the appropriate direction. Usually, the key fob’s interior will indicate which side should face the battery’s positive side. Test the remote buttons after carefully putting the key fob back together; some remotes include tiny LEDs that turn red when a button is pressed. If the red light comes on, the plug is in properly.
After changing the battery, is the Toyota key fob required to be reprogrammed?
A remote key fob needs to be associated with your vehicle particularly in order to be secure.
This stops people who drive the same make and model of automobile as you from using their remote to access your car. You’ll need to reprogram the fob if changing the batteries has erased this connection or if it was somehow disrupted in order for it to once again recognize your automobile.
Standard programming sequence
Your key fob can typically be reconfigured by following this typical procedure:
Instead of starting and then returning to the locked position, turn the key into the run position. Repeat this multiple times.
You’ll typically hear a chime or other sound when you’ve cycled the key enough times. At that point, you can push the lock or unlock button on your key fob to hear another chime.
What should I do if the battery in my Toyota key is low?
How to Replace the Battery in a Toyota Key Fob.
- Take the key out of the fob. Over the key portion of your key fob is a tiny metal button.
- Unlock the fob.
- Dispense with the green circuit board.
- Switch out the battery.
- Place the key inside the fob after putting the fob back together.
Are all key fob batteries the same?
What kind of battery is needed for a key fob? The batteries used by various automobiles vary. Three-volt batteries come in two main varieties: CR2025 and CR2032. The owner’s manual will list the precise type.
Can a dead key fob battery still start a car?
The Family Handyman claims that you can still start your car even if the battery in your key fob dies. Many automakers utilize a backup system to ensure the car can start even when the fob is dead, so after using the physical key to open your doors, instead of using your finger to hit the “start button, place the metal key back in the fob and use the fob to push the button.
Currently, the Mini has a slot that the key fob can plug into, and that car will start that way, but this design is a little dated at this point, which is why it’s always a good idea to review your car’s manual.
Although this is the least frequent method to start a car with a dead key fob, the Family Handyman points out that some Mazdas and a few other models may have a real key slot anywhere along the steering column.
What happens if the battery in my key fob dies while I’m driving?
This issue has been foreseen by automakers ever since the key fob was created. Nothing will happen if your key fob dies while you’re driving. Simply because the key fob is a locking and starting device only, the automobile will continue to run. The key fob has no influence over the ignition or engine once the automobile is moving.
Even though you’ll need to go to a general store or pharmacy to get the battery, replacing the battery in your key fob simply takes a few minutes if you’re pressed for time.
Why not take the time to renew your auto insurance at the same time as you’re replacing the batteries in your key fob?
You can access a new quotation with just a few taps on your phone screen by downloading the Jerry app and answering a few questions.
Jerry assists you in finding and comparing rates from more than 50 leading suppliers in minutes as a licensed broker. Jerry can assist you with purchasing new insurance and even canceling your existing policy when you find a lower rate.
Can a key fob with a dead battery start a car?
- On your key fob’s back, search for a little sliding button. You can slide the key fob cover off or click a button to do so. To get it to release, you might need to use your fingernail and a little force.
- Use the mechanical key to unlock the door after you get it. If your door doesn’t have a key slot, it’s likely concealed beneath the handle cover. To access the key slot, carefully remove the handle cover by using the key.
Now that you’re inside, here’s how to start the car with a dead key fob:
- Check the steering column for a physical key slot if neither of these approaches succeeds (some Mazda models have this feature). To start the car, place the mechanical key within the keyhole.
- Close the key fob after inserting the mechanical key once more.
- Some vehicles have a secret key fob slot that can be used to start the engine. For instance, the backup slot is located inside the cup holder in some Ford models. Your fob will fit perfectly in the slot. Use the push button start as usual after inserting the dead key fob into the holder.
- Press the START button with the key fob. Instead than pressing the button with your finger as usual, push the key fob against it. Many manufacturers utilize this backup device to make sure the car can start even if the key fob is dead.
What kind of battery is needed for a 2017 Toyota RAV4 key fob?
A CR2032 battery is typically available at big box stores and hardware stores in Watsonville. Most places have prices that are under $5. Replace the Toyota key fob batteries, then put it in the case and snap the key fob shut.
How do I find out which battery my key fob uses?
Open your fob to find the battery your automobile key fob uses. There will probably be an engraving that starts with CR followed by a string of digits if the item contains a battery. Check your owner’s manual or search online for your car’s make, model, and year without a battery or engraving.
Will changing the battery on my key fob make it work again?
A dead battery is the most frequent cause of a key fob not functioning. Having said that, your keyfob might be having more serious issues. A key fob replacement or even automobile door lock repair may be necessary if it stops operating after a battery change.
How do I know if changing my key fob battery will fix my car key?
When the key does not function under any conditions, it is likely that the car key fob has a dead battery. On all door locks, all buttons have the same lack of effectiveness. When buttons are pressed, no lights illuminate, suggesting that no signal was transmitted. The backup fob, however, functions flawlessly.
What do I do if my key fob is not working after a battery change?
Before you replace the automobile remotes if your key fob still won’t work after a battery change, make sure your locks are operating properly. Additionally, make sure you didn’t unintentionally deprogram your keychain.
Can you fix a key fob not working after a battery change?
Although replacing the remote’s batteries might be the quickest repair for the problem, this is by no means your only option. Check to see if the key fob or the vehicle is the root of your issue. After determining the root cause, correct or change the damaged components.