The headlamps of the Jester Classic were influenced by those of the Nissan 300ZX Z32, and it is nearly entirely based on the Toyota Supra JZA80 (Mk IV). The greenhouse area is quite similar to the Subaru BRZ/Toyota GT86’s.
The Jester Classic maintains the long, rounded design elements of the original Jester from Grand Theft Auto: San Andreas. Three mesh air intakes, with the central one meant to guide airflow to the radiator and the outside ones intended for the front brakes, dominate the front region of the bumper. Two black headlamp housings with glass covers, each with a rectangular lamp on the inside and a circle on the outside, are located in the upper section. The manufacturer’s insignia is located in the space between them, right in front of the seam where the bumper meets the rest of the body. A structural brace over the engine allows the comparatively plain hood to open to display the engine compartment. On the engine cover, you can notice more badging.
The car’s sides have a similar shape to the Jester from GTA San Andreas, with lengthy intakes that channel air to the rear brakes and rounded mirror shells located on the doors, close to the A-pillars. Black window trim and a straightforward design characterize the greenhouse region, while a slanted hatch and a rear ducktail spoiler are used in the cabin area.
The car’s rear end has a comparatively flat profile and features a third brake light and a manufacturer’s insignia in the middle, just below the ducktail spoiler. The car has three circular lamps with smaller ones inside each of the massive, black tail lamp housings that are on the outside. The bumper is comparatively flat and has two mouldings for the exhaust tubes in addition to a specialized portion in the middle for the license plate and vertical reverse lamps.
The Sultan RS interior, which is a paintable riff on the Sultan interior, is utilized for the interior of the car. But the horn cap features the relevant Dinka logo.
The car’s primary color is used on the bodywork, while the secondary color is used on the shells of the mirrors. A trim color is also available for the interior, and it is used on the inner edges of the seats, the stitching, and a portion of the doors’ backs and back sections. It makes use of a set of rims similar to the “Slideways” tuner rims found in Los Santos Customs and can also support a dedicated color, but with a deeper tint or shade (albeit this is only allowed on naturally-generated examples like those in Content Creator).
In This Article...
Penumbra (Mitsubishi Eclipse)
In GTA Online, a vehicle called the Maibatsu Penumbra mimics the Mitsubishi Eclipse from the first Fast & Furious movie. A little video clip depicts Brian O’Conner operating the vehicle.
While acceleration and the braking system aren’t so excellent, the handling and appearance of this car are its two best features. To acquire a strong overall performance, you can improve the vehicle at Los Santos Customs.
Banshee 900R (Mazda RX7)
The Bravado Banshee 900R in Grand Theft Auto: Online will capture your heart if you adored Han’s Mazda RX7 in The Fast and the Furious: Tokyo Drift. One of the finest drift vehicles in the game is the Banshee 900R, which draws significantly from the RX7.
This vehicle will satiate your need for speed if you enjoy it, as it boasts good acceleration. If you wish to float beside it, be cautious when bending around bends because it could spin out of control.
Reaper (Lykan HyperSport)
You’ll be reminded of the Lykan HyperSport in Furious 7 by the Pegassi Reaper’s appearance and build in GTA Online.
The strong engine in this car gives it incredible acceleration. It can easily spin out of control, though, because it is much lighter than other supercars. So take care!
What kind of vehicle drives Paul Walker in Grand Theft Auto?
Many people are interested in finding out how to make Paul Walker’s automobile in GTA V. Although it is feasible, the cost will be high. Purchase the Annis Elegy Retro Custom, GTA’s homage to Walker’s legendary Nissan Skyline GT-R R34, from Benny’s Original Motorworks for $904,000 first!
Once you get the vehicle, take it to your mechanic and have the following changes made:
- Ultra Blue for the light color
- Racing blue interior trim color
- Racing dash, stripped interior diodes, and dash
- Apex Club Man’s steering wheel
- Ultra Blue trim color
- Painted track seats for the seats
- Rear fenders with a wide angular profile
- Front, back, and sides of the neon sign are blue.
- Extreme Downforce BGW Spoilers
- Aluminum in secondary color: Brushed
- Painted extended splitter on the front bumper
- Midnight Racer livery
- Dials: Dash gauges and Pod Tacho
- Street Half Cage – Roll Cage
- Aluminum in Brushed as the Main Color
- Exhaust with a chrome tip
- Drift Skirts, skirts
- The Endo v.2 wheels
Depending on the discounts you have with your technician, all these modifications will cost several hundred thousand extra. You’ll also see that the instructions don’t include any engine or transmission improvements, so those will also cost extra to add.
The money you spend on GTA V is made up, but your vehicle insurance** premiums are real. Jerry, the vehicle insurance genius and super app, can help you locate the best deals on coverage because of this.
In GTA V, you have to offer answers to a ton of questions in order to design a vehicle, but with the Jerry app, you just need to provide answers to a few questions to receive personalized insurance quotes that are based on an extensive cross-analysis of more than 50 leading insurance companies.
Grand Theft Auto V and Grand Theft Auto Online
The greenhouse region, front quarter, rear bumper area, natural rear wing, and wheels of the Elegy RH8 all clearly show where it draws inspiration from the 2011 Nissan GT-R (R35). The Infiniti G37 Coupe-inspired front bumper and headlights are present, as are the Infiniti G35 Coupe-inspired rear taillights. The FT-86 Concept may have also served as inspiration for the rear end.
A two-door sports car with a sleek design, the Elegy RH8 appears to have a carbon fiber splitter at the bottom and inserts surrounding the three front intakes, which almost completely fill the width of the vehicle. A modest grille with the Annis symbol prominently displayed on the vehicle and L-shaped headlamp housings with circular lamps and square turn signals are located on the upper section. Plastic trim surrounds the grille and headlamp housings, and the bonnet has a conspicuous elevation in the middle with slanted parts next to the headlamps. When the bonnet is opened, a triangular strut brace over the engine compartment is shown.
To direct airflow to the rear brakes, the car’s sides have inset paneling around the doors and sloped parts that go from the front fenders to the rear fender vents. At the bottom, beneath the doors, are a set of carbon-fiber side skirts with concave patterns. The rear-quarter windows, A-pillars, and the separation of them are all finished with plastic in the greenhouse area. The doors are equipped with a set of mirror wings, “RH8” badges on the front fenders, and a “ELEGY” emblem on the rear window, right next to the rood panel.
A little “Annis” badge is located above the word “ELEGY,” which is embossed in the wall’s center and slants downward with a lip on the upper side. The upper portion is permanently surrounded by a red stripe, which is thinner in the middle and has two red circular lamps on either side. The bumper is made up of two housings for the dual exhaust tubes, a body-colored piece holding the license plate, and a carbon fiber diffuser with a rectangular reverse light in the center. The spoiler may or may not be on the starting vehicle.
The inside of the car is designated as “Elegy,” and it resembles the Banshee’s interior in many ways. The dials, however, have a reddish color. The manufacturer’s badge is on the steering wheel, and the comparable badge is on the passenger side of the dashboard.
The bodywork of the car is painted in its primary color, while the bonnet, roof, mirrors, and stitching are painted in its secondary color. Although there are no bolt features around the center, the “Endo v.1” sport rims from Los Santos Customs are more similar to this rim’s tuner variation.
The car’s over fenders and front bumper resemble those of the Stardast Over Fender Kit for the 350Z, and it is mainly based on the Nissan 350Z with hints from the Nissan 370Z. The car resembles the modified Nissan GT-R from the science fiction film Elysium when equipped with armor.
The car is portrayed as a two-door sports car with numerous rivet and armor plating elements all over the body. The car’s front end is composed of a splitter made of carbon fiber with little fins on the corners, a massive rectangular grille/intake in the middle, and two small housings next to it with round headlights and concave sides. The bonnet has two vented panels, and the headlight housings on the upper section are protected by armor plates with the driver-side one having a small aperture. On the front, you can see the Annis logo.
The automobile has broad overfenders on the sides, black side skirts, exit vents on the front and back of the rear fenders, and elegant vertical handles on the doors. Similar to the Kuruma (Armored), the greenhouse area’s windshield is shielded by a sizable armor plate that allows tiny openings for view, and the side windows have rally nets and rectangular mirror wings that are coated in black and carbon fiber. Additionally, there are lengthy roof scoops, vented plates on the cabin’s backside, and black louvers above the rear window. By default, a little spoiler is present in the back area.
The car’s back end features a red tail light on each side, mostly hidden by black guards, and the Annis emblem in the center. While the bottom has a big diffuser, an F1-style brake light in the center, and dual exhaust pipes, the region below has a separate portion for the license plate and black circular exit vents next to it.
The metal flooring, the numerous switches on the dashboard, and the racing fuel tank behind the seats are just a few of the race-inspired interior characteristics found in vehicles like the RE-7B and the ETR1. The steering wheel bears the Annis emblem, while the dials are inspired by vehicles like the Sultan and Kuruma.
The majority of the bodywork, the interior, and the overstitches are painted in the vehicle’s primary color, while the secondary color is painted on the lower headlamp housings, overfenders, roof scoop, and inner door frames. It has low-profile Fukaru tires and the same rim construction as the Verlierer. The rims can also accommodate a specific color, which is set to yellow on examples that have been purchased.
Two top-mounted machine guns that mimic Browning M2HB machine guns are available for the vehicle’s hood.