Actually, the majority of people feel that the fact that DENSO manufactures the parts for Toyota is the true cause of Toyota’s reliability.
Though they may be exact fits or alternate numbered parts, I have discovered over the past several years that not all DENSO parts are produced in Japan.
For instance, when the radiator on my 2000 4Runner Limited blew, I went to the nearby Toyota dealership to obtain a quote on a replacement. They had a couple in available and were about $280.00, however the label stated that they were Made in Japan. I then made the decision to do a little more research and discovered the identical component from DENSO (which stated OEM alternative part) online for about $175.00 but made in Taiwan. Similar to the original in every wayexact fit and quality, same as the dealer’sbut not Made in Japan. I ultimately chose the one from the dealership.
I personally make an effort to purchase Made in Japan components because I appreciate their high level of quality. Even though DENSO is a Japanese firm, the location of the component’s manufacturing has a significant impact because the raw materials are purchased locally and may not be of the highest quality. Look at some of the Mercedes and BMW vehicles that are produced outside of Germany as an illustration. While not entirely bad, most of those vehicles’ failures are attributable to the use of non-German parts. Due to their legacy reputation from the days when all of their automobiles were made in Germany, European cars continue to perform well.
To avoid starting a tirade, always try to purchase DENSO that is Made in Japan if you have the option to choose between purchasing Japanese-made DENSO and non-Japanese-made DENSO.
In This Article...
Toyota employs DENSO?
Today, it was decided to create a joint venture* between Toyota Motor Corporation and DENSO Corporation for the advanced research and development of next-generation in-vehicle semiconductors. The two businesses will examine the specifics and plan to launch the new business in April 2020.
In recent years, the use of electronic controls in vehicles has increased. Additionally, the quantity of in-vehicle semiconductors has increased, and their performance has improved with time. The development of next-generation semiconductors, which are essential to technological advancements like linked automobiles, automated driving, sharing mobility, and electrification, is required to establish a future of mobility that is safe and sustainable.
In June 2018, DENSO and Toyota reached an agreement to transfer the development and production of electronic components to DENSO. They have been attempting to establish a quick and aggressive production and development system based on this agreement.
DENSO has made the decision to create a new firm for the advanced research and development of in-vehicle semiconductors and will build a more robust system for semiconductor R&D. By fully utilizing Toyota’s mobility expertise, DENSO has decided to accept equity participation from Toyota for the new firm, accelerating the pace of development. Toyota will introduce cutting-edge semiconductor technologies from the planning stage when creating its mobility services and automobiles through equity participation in the new company.
In order to contribute to the development of the future of mobility, the new company will carry out advanced research on the fundamental structure and manufacturing process of next-generation semiconductors. It will also develop electronic components using semiconductors, such as power modules for electric vehicles and periphery monitoring sensors for automated vehicles.
* Antitrust authorities must approve the joint venture’s foundation.
1. Organization
2. The address of the headquarters
Japanese address 500-1 Minamiyama, Komenoki-cho, Nisshin, Aichi (on the premises of the Advanced Research and Innovation Center)
Capital 3.
4. Possession
5. Workers
6. Organization description
Advanced research and development of semiconductors for use in vehicles and the creation of semiconductor-based electronic components
The hybrid-electric Prius was unveiled in 1997 by Toyota Motor Corporation (TMC) (NYSE: TM), while the Mirai, the first mass-produced fuel cell sedan, was unveiled in 2014. Toyota has had its headquarters in Toyota City, Japan, since 1937. Toyota is happy to employ 370,000 people today in localities all over the world. Together, they produce 10 million vehicles annually, ranging from compact cars and luxury vehicles to minivans and commercial trucks, in 28 countries and territories, and sell them in more than 170 nations and areas under the brands Toyota, Lexus, Daihatsu, and Hino. Please visit https://global.toyota/en/ for further details.
What brand is Toyota’s original equipment manufacturer?
Original Equipment Manufacturer (OEM) parts are manufactured by the automaker, in this case, Genuine Toyota Parts, and are the identical components that were used in the construction of your Toyota vehicle.
It is highly likely that your automobile will get brand-new Genuine Toyota parts to replace whatever component broke when you bring it to be fixed at a Toyota Authorized Dealer. You will typically have the choice of using OEM or aftermarket parts if you bring your car to an independent mechanic shop for maintenance or repairs.
The term “aftermarket parts” refers to parts produced by businesses other than the original producer, in this example, Toyota. Aftermarket components come in a variety of quality and price ranges and are designed to replace OEM components. You can be certain of what you’re receiving when you use OEM parts. There isn’t much of a guarantee with aftermarket components. Let’s examine each part type in more detail.
The safest course of action when a part on your Toyota needs to be changed or repaired is to have the work done at a Toyota Authorized Dealer using Genuine Toyota Parts. While there are valid justifications for using aftermarket components rather than OEM components, you should carefully weigh the many benefits that Genuine Toyota Parts offer before making your own decision to have your Toyota fixed.
Consistency and High Quality Genuine Toyota parts are recognized for their superior quality. Genuine Toyota Parts are guaranteed to perform as intended when you replace a part with one.
Simpler to Select When you use OEM parts, selecting the right replacement component is simple. When it comes to OEM parts, there are significantly fewer possibilities, making it simpler to locate the precise replacement. Warranty Compared to aftermarket alternatives, backed OEM parts typically have superior warranties. The Toyota Replacement Parts and Accessories Warranties only apply to Genuine Toyota Parts. Any defects or issues brought on by the use of aftermarket components are not covered by any Toyota warranty.
Cost virtually usually less expensive than OEM parts are aftermarket parts. However, you may end up paying more in the long run if you take into account the inconsistent nature of aftermarket parts and the possibility of having to replace them more than once.
Quality To be honest, aftermarket components have undergone major modifications to raise their general level of quality. Finding high-quality aftermarket components is achievable if you know where to seek and what to look for.
Variety Aftermarket components give a lot more variety and options than OEM parts, which have a small selection. You might find the aftermarket parts you need if you desire a specific impact on the performance of your car. Just keep in mind that Toyota’s warranties DO NOT cover aftermarket items.
Are Denso parts genuine?
The headquarters of DENSO, a producer of OEM and aftermarket auto parts, are located in Aichi, Japan. The USA, Russia, and Germany are just a few of the more than 35 nations where it operates. When the business split from the Toyota Motor Company on December 16, 1949, it was established as Nippon Denso Co. Ltd. The parent company for DENSO is still the Toyota Group of Companies. Over 140,000 people work for DENSO throughout various locations.
Major automakers receive the brand’s OEM parts that are produced. The OEM goods include parts for braking control and safety systems, information and communication systems, body electronics, climate control systems, and powertrains. Diesel fuel injection systems, gasoline engine management systems, alternators, and engine cooling systems are all part of DENSO’s array of powertrain components. DENSO also sells components for electric and hybrid vehicles. Air conditioners and air purifiers are included in the category of climate control components. DENSO’s body electronics line includes horns, flashers, windshield washers, wipers, and washers. The company creates corner clearance warning systems, SRS airbags, door lock controls, and ABS controls to support the driving and safety systems. DENSO also produces automotive navigation systems and data connectivity components. The company also sells the numerous motors found in cars, such as the power window and power steering motors. Wiper blades and spark plugs are among DENSO’s aftermarket offerings.
DENSO has established a subsidiary called DENSO WAVE in addition to producing automotive parts, and it sells automatic identification parts like bar-code scanners, QR code readers, and IC card-related parts. Industrial robots and programmable logic controllers are included in the company’s lineup of factory automation solutions. Automatic faucets are among the consumer goods that DENSO also sells.
A technical partnership between DENSO and German auto-parts maker Robert Bosch GmbH was founded in 1953. Through the AICHI DENSO Co. Ltd, which was subsequently amalgamated with DENSO in 1959, the business started producing spark plugs in 1957. The Deming Prize, one of the highest accolades for quality control, was given to DENSO in 1961. In 1995, the company was given the Global Environment Award. A significant milestone was reached by DENSO in 2002 when all 14 of its operating facilities in Japan produced zero emissions.
Since the 1960s, the firm has participated in motorsport events. For motorsport vehicles, it also provides cutting-edge iridium spark plugs and engine management systems. Additionally, Formula Nippon, Japan Super GT 500/300, and the FIA World Endurance Championship are all sponsored by DENSO. A Denso Kinetic Energy Recovery System was included in the Toyota TS030 Hybrid, which finished second in the 2013 24 Hours of Le Mans.
How do DENSO spark plugs compare to NGK?
While Denso manufactures strong, long-lasting spark plugs, NGK provides overall higher performance. The best spark plug brand to choose is NGK if you want to increase the performance of your engine.
Does OEM equate to original?
A third-party producer who makes products for the aftermarket is the antithesis of an OEM. An OEM is something manufactured particularly for the original product, whereas an aftermarket item is something that a consumer might use in place of an OEM.
Let’s take the scenario where someone needs to change their car thermostat, which ABC Thermostats specifically designed for their Ford Taurus. They might purchase the original equipment manufacturer (OEM) part, which is a replica of the ABC thermostat they originally used when the car was made. Or they may purchase an aftermarket component, a replacement made by a different business. In other words, a replacement is an OEM if it also originates from ABC Company; otherwise, it is an aftermarket item.
Although aftermarket equipment can be less expensive than OEM products, its quality or lifespan may be significantly reduced.
Typically, buyers choose an aftermarket product over a generic one because it is more accessible or costs less. Even while aftermarket components might work with the original product, there might be a sizable loss in performance or product quality.
On the other hand, occasionally aftermarket suppliers produce a certain item so expertly that consumers become familiar with it and actively seek it out.
The success of Hurst Performance, a company that makes gear shifters for cars and is based in Warminster Township, Pennsylvania, serves as an illustration of this. Hurst shifters gained such a reputation for being exceptionally effective that customers really preferred them to the original component.
Hurst shifters eventually gained such a high level of confidence from major manufacturers that they were included in their own factory designs, thereby making Hurst an original equipment manufacturer.