Simply put a 3.5mm audio cable into the aux port and switch the radio to the aux setting to use the aux in the Toyota Corolla. You might have a blown fuse for the aux port if this doesn’t work, albeit the entire radio would probably be affected. Look for a small gap or crack along the dash to the left of the steering wheel to access the fuse box. You should pry this open with a screwdriver or prybar. You will discover a number of fuses within. A schematic that details the functions of each fuse can be found on the back of the panel that you opened. You can also locate this in the owner’s annual for the car if it isn’t on the rear of the panel. Simply pull it out once you have determined the fuse you require. There should be a thin metal strip connecting the two protruding parts. In the event that this has been broken, a new fuse will need to be installed. The fuse is ok and can be popped back in if this strip is there. You can buy new fuses for around ten dollars, making them reasonably priced.
If the model was created after 2009, all that is needed to use the aux is a 3.5Mm aux cable. Connect your device’s other end to the port’s other end.
In This Article...
How can I connect my Toyota to my AUX?
Connect your portable audio player in AUX mode using a non-impedance stereo tiny plug cable. From the Home screen, select ENTERTAINMENT. Choose AUDIO SOURCE, then AUX.
Is there an AUX input on the 2009 Toyota Corolla?
There are five different trim levels available for the 2009 Toyota Corolla: basic, LE, S, XLE, and XRS. All of them (with the exception of the XRS) have the same 1.8-liter, four-cylinder engine, which produces 132 horsepower and 27/35 mpg. With air conditioning, 15-inch steel wheels, and an MP3-compatible CD player, the standard model gets you going. Thank goodness Toyota included an auxiliary jack in every trim.
Choose the S model if you want a sportier Corolla, and you’ll receive 16-inch steel wheels, foglights, an underbody spoiler, sport seats, a leather-wrapped steering wheel, and two extra audio speakers. The top-of-the-line XRS is reached by moving up a level; it comes with a larger, 2.4-liter engine that produces 158 horsepower, sport suspension, 17-inch alloy wheels, a rear spoiler, cruise control, and chrome interior trim. Although the larger engine in the XRS produces 26 more horsepower than the 1.8-liter typical in the other trims, it also significantly lowers average fuel economy by 5 mpg.
If you choose the luxury option, you will first notice the LE trim, which above the base model simply adds power windows, locks, and body-color outside mirrors. With 16-inch wheels, wood grain trim, keyless entry, electroluminescent instruments, variable intermittent wipers, and a sliding center armrest, the XLE builds on the LE’s features. However, the XLE does not come standard with cruise control as it ought to. That privilege is reserved just for the XRS.
Our XLE base price of $17,550 is considered to be in the center.
Starting at $15,350 for the base model and $18,860 for the top-of-the-line XRS, respectively, an optioned-out XRS will cost in the mid-$20s.
Toyota provides “Make it Mine bundles” for the Corolla that combine a number of options. Base Grade Security System was one of the options offered by “Make it Mine #3.” Yes, they spelled it wrong. Before posting this information online, you’d think they’d hire a copywriter.
How can I make my car’s AUX function?
Find the Aux Input jack on the dashboard or car stereo. Connect the audio cable’s one end to the smartphone’s headphone jack. Put the cable’s other end into the Aux Input jack on your car stereo. Set the AUX Input setting on the car stereo.
Why won’t my car’s AUX cord work?
Verify that the AUX cord is securely attached to both devices. If there are only two rings and this doesn’t work, your cord is incompatible. If there are three rings, the auxiliary cord needs to be changed. If this doesn’t solve the issue, you might need to replace the auxiliary wire jack.
How is an AUX cord connected?
MP3 players, cellphones, and tablets that have a compatible 3.5mm AUX output connection can be attached.
- One end of the AUX wire should be inserted into the speaker’s AUX input.
- The AUX output port on your audio device should now accept the other end of the AUX cable.
Is Bluetooth available on the 2006 Toyota Corolla?
Bluetooth Car Interface Built-In The original Toyota Corolla 2006 car audio now includes Hands Free Calling and Wireless Audio. The device has a microphone and Bluetooth built in.
How can I link my 2009 Toyota Corolla’s Bluetooth?
It’s really simple to connect your device over Bluetooth once you know how. Decide between an Android or an iPhone, then follow those instructions. Keep in mind that in order to use phone apps in your Toyota vehicle, you must first register a Toyota EntuneTM account.
Android Directions
Using Android:
- Activate “Scan for devices.”
- Activate Bluetooth.
- Choose “Settings”
- Input “SETUP”
- To make this system discoverable, click.
- Choose “Add New Device”
- Choose “Bluetooth”
Select “Android car multimedia is available. Accept the phone’s pairing request and press “Accept on the touchscreen of your Toyota. Toyota and your phone are now connected!
iPhone Directions
Using an iPhone
On your iPhone, tap “Car Multimedia,” then tap “Pair. Press “Accept” once more on your Toyota touchscreen. Toyota and your iPhone are now connected.
EntuneTM App Suite and Hands-Free Bluetooth
You’ll need a USB cord to use your phone’s apps with your Toyota. The prior Bluetooth configuration was made exclusively for hands-free EntuneTM use. It makes your EntuneTM capable of voice commands so you can keep your eyes and attention where it’s most needed: on the road.
Need to Order Some Stuff for Your Toyota?
Visit our Parts and Accessories page to see everything we have available for your vehicle. Check out our service deals while you’re there to ensure you’re receiving the greatest bargain.
Why won’t my iPhone’s aux function?
Inspect the charging port on your device for debris or damage. Make sure that your charging cable is properly placed into the port. Upgrade your gadget. Verify that your audio is running the most recent firmware available from the vehicle’s manufacturer.
Why won’t my music play over the AUX?
In most cases, changing the AUX cord will solve the problem of music not playing through the auxiliary port. The first thing you should do is utilizing another auxiliary cord you might have lying around the house to see if that resolves the problem because auxiliary cords are infamous for breaking and being unreliable.
Additionally, make sure that the auxiliary input is set to the proper mode before starting to play music.
Since you noted that the AUX port itself has a slight crack, the port might need to be replaced in order to resume music playback.
Please refer to the corresponding help sections on the Troubleshooting Page for information on changing the AUX port and checking the mode.
How do I link my phone to the audio system in my car?
How to use Bluetooth to link your Android phone to your automobile
- Start paring on the stereo in your car. On the stereo in your car, begin the Bluetooth pairing procedure.
- Step 2: Navigate to the setup menu on your phone.
- Step 3: Choose the submenu for Bluetooth Settings.
- Choose your stereo in step four.
- 5. Enter your PIN.
- Enjoy your music in step six.
Why does my automobile indicate there isn’t any music?
It’s no longer necessary to keep a variety of CDs or cassette cassettes in your automobile. You can enjoy listening to digital audio from your cell phone or other devices in current autos.
Because the audio file’s format is incompatible with your car radio, car stereos will refuse audio files. The most popular audio file types are MP3 and Wav files, while there are many others. The audio won’t play if your stereo is not capable of playing that format.
There are a number of additional potential causes why the stereo in your car might not be able to play specific audio files.
Usually, the issue can be resolved by troubleshooting it using a few straightforward steps, followed by the necessary corrective action.
This thorough article will cover both how to identify the cause of and a repair for the “No Audio Files” error that appears on your car stereo.
How can an AUX port be tested?
You can connect a microphone or other audio output device with a 1/8-inch minuscule connection to your computer using the “Line In” audio jack. The jack may be labeled “Mic” or “Microphone” on some computers, particularly laptops, as well as on audio cards commonly seen on desktop computers. You should test the jack with a different device if you are unsure whether the issue is with your microphone or another device, the jack itself, or whether it is miscalibrated or broken.
Incorporate the testing equipment into the jack. By selecting “Start” from the menu bar, then “Accessories,” you can access the “Sound Recorder” feature in Windows. You’ll see the “Sound Recorder” bar.
Record sound until the sound recorder’s counter reads around 1:00. (one minute). Select “Stop Recording” from the menu. Before clicking “Save,” give the file you recorded a name in the dialog box that pops up and select a convenient spot on your computer to store it.
To open the stored file and start Windows Media Player, click on the saved file. To begin playback, click the arrow in the Windows Media Player box’s center. If the sound you recorded is audible, then your jack is not the cause of any issues you are experiencing. Replace your desktop audio card or take your laptop to the shop if the sound is unclear or you can’t hear anything.
How is an AUX cable used?
You can put anything with a normal headphone connection into the 3.5mm auxiliary-in (or aux-in) connector in your car. The multimedia system receives sound from it, allowing you to “stream” music from a device through the car’s speakers.
A headphone jack can it be used as an AUX?
The quick answer is that, unless you go a little farther, they are actually quite similar. To the untrained eye, they appear identical, but their usefulness distinguishes them. In most circumstances, you can indeed swap them out, but we wouldn’t advise it.
Despite apparent similarities, aux line outputs and headphone outputs are not the same. The main variations relate to how they process impedance and receive audio signals.
Aux outputs have an impedance level of 75 to 150, but aux inputs have an impedance of 10 K. Headphone inputs, on the other hand, have an impedance range of 8 to 600. The impedance of headphone jack outputs ranges from 0.1 to 24.
However, their wiring is the primary distinction between the two. The dimensions of headphone jacks range from 2.5mm to 6.35mm, whereas the usual aux connector size is 3.5mm. A headphone jack can be used as an aux-in, but not the other way around. In essence, mixing consoles use auxiliary cables.