If you try this method on your own, there’s a chance you won’t be able to put everything back in its proper place, so be sure to follow the instructions and watch the instructional video first. When your Camry’s doors can be unlocked but the alarm system prohibits you from opening the trunk and your keys are inside, it still functions.
- On the driver’s door, find the plastic plug. When the door is closed, it is level with the handle and faces the B-Column. Remove it, then store it securely.
- Peer through the gap.
- Inside is a Torx head screw. Locate the right size Torx screwdriver, then remove the screw. Although there are safeguards in place to stop the screw from hitting the door, proceed with caution just in case.
- To get to the key cylinder, pull the door handle. You need to slide the key cylinder out of the socket, which can be difficult considering the tight fit. Avoid breaking off the handle or scratching the paint. As a temporary layer of security, some masking tape will be fantastic.
- The cylinder head will emerge facing the car’s rear. Remember this, as that’s the only way you’ll be able to put it back in once you’ve opened the trunk.
- Take a look at the key cylinder’s tip. The plus-shaped lock mechanism will be visible. When you look inside the cylinder slot, you will see a plus-shaped indentation where the cylinder should fit.
- Carefully place a flathead screwdriver into the cylinder slot. Rotate it to lock the car and then to unlock it once it is positioned inside the plus-shaped indentation.
- When you push the trunk release button, the trunk instantly opens!
It is far more difficult to put the cylinder lock back in place than it was to remove it. Let’s follow the procedures to put the door back in working order.
- Slide the cylinder back in from the same angle it was inserted by raising the door handle. Take your time, be gentle, and avoid using forcethis will involve plenty of twisting, pivoting, and turning.
- Insert the key, turn it, then gradually apply pressure to the cylinder until it is facing the proper direction and the door handle can slide onto it. The cylinder should then automatically fall into position.
- Tighten the Torx screw while the key is still within the lock. If the screw isn’t holding, you’ll use the key to wriggle it into place until it does, causing everything to settle into its proper position.
- After replacing the plastic plug, the procedure is complete.
In This Article...
Without keys, how can a trunk be opened?
Oops! Fortunately, as long as that isn’t locked, too, you can use the trunk release button or lever inside your car to open the trunk without a key.
The best approach to open the trunk if you’ve completely locked yourself out of the car is still through the cabin. To open your automobile door, you have two options: call a locksmith or use a slim jim.
Most auto parts stores sell slim jims, often known as lock picks. To utilize it to retrieve your keys from the trunk, follow these steps:
- Stick the pick down between the window and the window trim.
- With the pick, search the area for a rod.
- To unlock the trunk, push or pull the lock.
- Now look inside your car for the lever or button that releases the trunk.
- The automobile door should then open after using the pick to raise the rod.
Therefore, you have a few options if you’ve locked your keys in the trunk. If you’re locked out of the trunk as well, you can either use a slim jim by following the methods above, call roadside help, or open the trunk using the trunk release button or lever in the cabin.
If you have a history of bad luck, Jerry’s roadside assistance membership can help you avoid the hassle of auto accidents. For just $6.99 a month, Jerry joins with Urgently to offer you the best roadside assistance available, including features like towing, lockout service, and a mechanics hotline.
Can you unlock a trunk from the inside?
The United States National Highway Traffic Safety Administration (NHTSA) mandated that all automobiles be built with a trunk release latch as of September 1, 2001. This choice serves as a safety precaution to prevent accidently sealing oneself within the trunk.
Where is the interior trunk release button/switch on my car?
The trunk of most modern vehicles may be opened by twice pressing the unlock button. On the left side of the driver’s seat, older cars will have a lever. The center console, the driver’s side of the dashboard, and the glove box are other positions for the trunk release.
Why won’t my trunk release work?
Some vehicles’ trunk releases need the engine to be running. The automobile deadlocking may have caused this or it could be a standard feature. The most frequent cause of the most common trunk not opening from the interior release without these security features is because the assembly is damaged.
What tools do I need to open my trunk without the key?
A shoelace or wire hanger may be all that’s needed to figure out how to extract the keys from a locked trunk. These implements are used to open the door and operate the internal locks. You can activate your trunk release once inside. Tools for professional car lockouts include lock picks, wedges, and slim jims.
How can I unlock my trunk without unlocking the car?
If you’re trying to figure out how to get keys out of a locked trunk, keep in mind that novices almost never succeed in doing this. It is frequently necessary to use specialized equipment like tryout keys and jiggle keys, which function similarly to bump keys for cars. The trunk will need to be plucked or drilled if those don’t work.
Why does a locksmith need to drill open a locked trunk?
To prevent any unlocking by keyway manipulation or direct contact with lock switches, several automobiles incorporate high-security measures. This is frequently referred to as a deadlock and calls for the creation of a small hole in the trunk so a locksmith can gain access to the actuator for the trunk lock.
The trunk unlock button cannot be found.
To open the trunk, raise the lever next to the driver’s seat. Using your master key to lock the trunk release lever will keep people from opening the trunk.
How do you use a screwdriver to open a trunk from the outside?
The screwdriver must be wedged into the lock and moved left and right until the trunk is unlocked. This is not advised, though.
If you use a screwdriver to open the trunk of your car, you risk damaging the paint, and replacing paint can cost hundreds of dollars. You also run the chance of damaging the lock. To solve the problem, you might want to contact a locksmith.
With a roadside assistance membership, you can avoid the inconvenience of lockouts and breakdowns. Try Jerry if you want roadside assistance at a great price. For just $6.99 a month, Jerry delivers the best roadside help in the business, including features like towing, lockout service, and a repair hotline.
Without a key, how do you open the trunk on a Toyota Corolla?
Use the trunk release lever on the driver’s side of your Toyota Corolla to open the trunk quickly and easily. Use a slim jim to get into your automobile if you’ve locked yourself out of the cabin as well. You can also call a locksmith.
Is there a button to open the trunk?
Pushing the Trunk Release button from inside the car will open the trunk lid. To the left of the steering wheel on the instrument panel, there is a button.
What should you do if your keys are left in the trunk?
Request a locksmith The Pop-a-Lock team can quickly unlock the lock for you whether you’ve locked your keys in the trunk or the car’s cabin. Being in a scenario where you need your car keys but they are not available might be unpleasant.
How can a car door be opened without a key from the outside?
- Obtain Your Extra Key.
- Open Your App.
- Use fishing line or string to open manual locks.
- Use a wire clothes hanger to unlock.
- Use an inflatable pump wedge to unlock.
- Use a Strip of Sturdy Plastic to unlock.
- Call a locksmith or AAA.
- Make a police call.
With a dead battery, how do you open the trunk of a Toyota Camry?
Pull the lock tab up and use the outside door handle to unlock the door. Your car features a release mechanism on the right corner of the trunk that allows the trunk to be opened from the inside as a safety precaution. Push the release lever to the left to open the trunk.