Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for another 10 seconds or so. You can hear a beeping noise in addition to the maintenance light beginning to flash. The light ought should thereafter go out.
In This Article...
Vehicles without smart key system
1. Switch on the engine (one position before starting engine).
2. Verify the trip meter Readings are displayed. Switch off the ignition. Go to step three.
Vehicles with smart key system
1. Slightly depress the “ENGINE START STOP” switch (do not start engine).
2. Verify the trip meter Readings are displayed. Switch off the ignition.
3. Press the “ENGINE START STOP” switch once while simultaneously pressing the Trip Meter reset button (do not start engine).
Without multi-information display: Continue to press and hold the button until the trip meter displays “000000.
4. To make sure the indicator has been reset, turn off the ignition and start the engine.
Vehicles with colour multi-information display
1. To change the display to SETTINGS while the engine is running, use the controls on the right side of the steering wheel.
2. From the SETTINGS menu, choose MAINTENANCE SYSTEM.
3. To reset the system, choose YES.
4. “Initilization Completed” will be shown when the reset is finished.
Hybrid
1. Switch on “POWER” once (do not start engine).
3. Verify the trip meter Readings are displayed. Switch off the ignition.
4. The “POWER switch must be put in ON mode while depressing the trip meter reset knob (do not start engine). Press and hold the button consistently until the trip meter reads “000000.”
5. To make sure the indication has been reset, turn off the ignition and then turn on the engine.
How can you turn a Toyota’s maintenance needed light back on?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
How can I dim the maintenance is necessary light?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
Why does my maintenance light come on after I change the oil?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.
How can the maintenance light be turned off on a 2007 Toyota Highlander?
When your maintenance light comes on, there probably is an issue. Check everything out and make sure your automobile is road-ready before you reset anything. Follow these instructions to clear the maintenance light on your 2007 Toyota Highlander Hybrid if the lights are the only issue:
- Once the entire miles is displayed, press the odometer button.
- Your maintenance light ought to briefly flash before going out.
- Switch off the ignition.
- Without starting the engine, turn the ignition to the on position.
- As you restart the ignition, press and hold the odometer button.
Maintenance lights are not to be taken lightly. One fault with your engine could trigger serious problems like mechanical failures or even crashes! Before you reset your maintenance light, make sure everything is in working order.
Spend a few minutes with Jerry to reduce your auto insurance costs while the mechanic is looking at your vehicle. The Jerry app, a licensed broker, can help you quickly search and compare rates from more than 50 top providers. Jerry can assist you in purchasing your new plan and even in canceling your old one if you locate a lower rate.
What does the Toyota Highlander’s maintenance required light mean?
Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.
This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.
To manually reset the system to turn off the light, however, follow these instructions:
When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.
Why does my Toyota state it needs maintenance?
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Now the light will read “MAINT REQD.”
- Press and hold the ODO reset / readout button while the engine is off.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- If the car is on, turn it off.
- The ODO display will briefly flash before beginning to display only zeros.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!