Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for another 10 seconds or so. You can hear a beeping noise in addition to the maintenance light beginning to flash. The light ought should thereafter go out.
In This Article...
How can I turn off the message that my Toyota needs maintenance?
Turn your key to the second position after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a total of 10 seconds. The light ought to flash, potentially beep, and then go off as a result. Release the odometer button once it has been turned off, then start the automobile.
Vehicles without smart key system
How can I disable the Toyota maintenance is necessary message?
Turn your key to the second position while pressing and holding the dashboard’s reset trip meter button. Keep pressing the odometer button for a total of 10 seconds. The light ought to flash and perhaps beep after this before going off. Release the odometer button after it is off, then start the vehicle.
Vehicles with smart key system
1. Slightly depress the “ENGINE START STOP” switch (do not start engine).
2. Verify the trip meter Readings are displayed. Switch off the ignition.
3. Press the “ENGINE START STOP” switch once while simultaneously pressing the Trip Meter reset button (do not start engine).
Without multi-information display: Continue to press and hold the button until the trip meter displays “000000.
4. To make sure the indicator has been reset, turn off the ignition and start the engine.
Vehicles with colour multi-information display
1. To change the display to SETTINGS while the engine is running, use the controls on the right side of the steering wheel.
2. From the SETTINGS menu, choose MAINTENANCE SYSTEM.
3. To reset the system, choose YES.
4. “Initilization Completed” will be shown when the reset is finished.
Hybrid
1. Switch on “POWER” once (do not start engine).
3. Verify the trip meter Readings are displayed. Switch off the ignition.
4. The “POWER switch must be put in ON mode while depressing the trip meter reset knob (do not start engine). Press and hold the button consistently until the trip meter reads “000000.”
5. To make sure the indication has been reset, turn off the ignition and then turn on the engine.
How do I stop the needed maintenance?
The Maintenance Required Light that flashes on the instrument panel is reset using the processes that Lexus walks us through.
Keep in mind that after doing maintenance, the light should be reset using the following procedure:
- the ON position on the ignition switch
- Set the trip display to TRIP A mode on the odometer.
- Switch the ignition to the “OFF” position.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- The service reminder light for maintenance will
The Trip Meter RESET button should be released.
7. Insert the key in the OFF position.
8. Ensure the Service Maintenance Reminder Light turns off by turning the ignition to the ON position. NOTE: If the light in step 5a keeps flashing, turn off the ignition and follow the steps from step 1 again.
Why does my maintenance light come on after I change the oil?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.
The maintenance needed light on a 2007 Toyota Highlander can be reset in a few different ways.
When your maintenance light comes on, there probably is an issue. Check everything out and make sure your automobile is road-ready before you reset anything. Follow these instructions to clear the maintenance light on your 2007 Toyota Highlander Hybrid if the lights are the only issue:
- Your maintenance light ought to briefly flash before going out.
- Once the entire miles is displayed, press the odometer button.
- Switch off the ignition.
- Without starting the engine, turn the ignition to the on position.
- As you restart the ignition, press and hold the odometer button.
Maintenance lights are not to be taken lightly. One fault with your engine could trigger serious problems like mechanical failures or even crashes! Before you reset your maintenance light, make sure everything is in working order.
Spend a few minutes with Jerry to reduce your auto insurance costs while the mechanic is looking at your vehicle. The Jerry app, a licensed broker, can help you quickly search and compare rates from more than 50 top providers. Jerry can assist you in purchasing your new plan and even in canceling your old one if you locate a lower rate.