Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for another 10 seconds or so. You can hear a beeping noise in addition to the maintenance light beginning to flash. The light ought should thereafter go out.
In This Article...
How can the maintenance needed light be turned off on a 2012 Toyota Highlander?
If you are certain that the light is malfunctioning, it makes sense that you would want to reset it yourself. By following these instructions, you can reset the oil maintenance light on your 2012 Toyota Highlander:
- Release the button only when the display reads 000000. Release the button after which to switch off your car.
- Turn off your car after confirming that Trip Meter A is displayed on the dashboard.
- Holding down the button causes the ignition to turn back to the RUN position.
- Check your display after starting your engine to ensure that the light has reset.
- On your dashboard, push and hold the trip meter reset button.
- Activate the RUN position on the ignition if your Highlander has a key. Push the starter button once without depressing the brake if your Highlander has one.
Even while doing this would turn off the maintenance light, it’s still a good idea to get the issue looked at by a professional, particularly if the oil light reappears after the light has been turned off. Not just a low oil level, but a number of additional issues, can be indicated by the light. Even if you haven’t yet traveled the anticipated mileage, you can still require an oil change.
Keeping an eye on your car is usually a good idea, but it doesn’t have to be expensive. Because of this, the Jerry app was created to provide you with the best vehicle insurance prices in just one minute. Download the app, then fill out a few short questions to access a lengthy collection of quotes chosen just for you. Jerry drivers save $879 annually on auto insurance.
How can you turn a Toyota’s maintenance needed light back on?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
Why, after an oil change, is my maintenance required light still on?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.
What happens after I change the oil in my car?
Reset Oil Change Indicator
- Turn on the ignition.
- Both the stop and accelerator pedals should be fully depressed.
- Maintain firm pressure on the brake and accelerator pedals.
- A notice verifying the reset process is ongoing appears after three seconds.
Why does my car indicate maintenance is needed following an oil change?
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Press and hold the ODO reset / readout button while the engine is off.
- Now the light will read “MAINT REQD.”
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- The ODO display will briefly flash before beginning to display only zeros.
- If the car is on, turn it off.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
What does the Toyota Highlander’s maintenance required light mean?
Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.
This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.
To manually reset the system to turn off the light, however, follow these instructions:
When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.
What does Toyota Highlander 2015 maintenance necessary mean?
On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.