Starting with the car parked and all doors closed will allow you to reset the maintenance light on your Toyota 4Runner. Don’t start the engine after turning the ignition key. You must press the ignition button twice if your SUV has one, but you must not depress the brake pedal as you would if you were starting the car. Depending on the model year, locate the ODOMETER/TRIP button in the instrument cluster and choose either ODO or TRIP A. Press the push button start once or turn the ignition to the off position. When you restart the ignition, press and hold down the ODOMETER/TRIP button one again. If your car has a push-button ignition, press it twice like you did previously. Keep pushing the ODOMETER/TRIP button, and 000000 MILES will eventually show. The service light ought to turn off. To confirm that the reset was saved, switch the ignition to the off position before starting the car.
Turn the ignition on, then set the odometer to “odo” to reset the maintenance light on a Toyota 4Runner. Switch the ignition off. While turning the ignition back on, push and hold the trip reset button.
In This Article...
On a 2014 Toyota 4runner, how do you turn the maintenance light back on?
Your mechanic most likely failed to reset the maintenance light if it is still on after your car has had a thorough checkup. But don’t panic; by following a few easy actions, you can turn off the maintenance light on your 2014 Toyota 4Runner:
- Turn the ignition key once to start your automobile in auxiliary mode.
- Press and hold the Trip Meter Reset button while you turn off your car. Don’t let it go.
- Holding the button still, restart accessory mode on your vehicle.
- After a time, you ought to notice the odometer readings returning to normal. You can then let off of the Trip button after this has occurred.
You can drive more at ease now that you’ve successfully reset your maintenance light. To see how much you can save on your auto insurance before you head back out, download the Jerry app.
How do you turn off the Toyota Tacoma’s maintenance is required light?
The convenience of having a car-savvy family member must be incredible! Yes, you can manually reset your light as you are aware that your car is in good condition.
Turn off your vehicle, then push and hold the odometer reset button to turn off the maintenance light on a Toyota Tacoma. Odo/Trip is the typical label for this button. Hold the button down as you restart the ignition of your car.
Your maintenance light ought to be back on now! By starting your car as usual and waiting a few seconds, you can ensure that the light remains off. Visit a professional to ensure that your automobile and your sensors are in good working order if the light does indeed come back on.
Although automobile repairs might be expensive, Jerry can help you save money on other auto-related costs. Jerry is a free insurance comparison software that checks around for the best deals with more than 50 different insurance providers. You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have. Every year, the typical Jerry user saves $879.
How can my Toyota maintenance be reset?
How Can the Maintenance Required Light Be Reset?
- Turn on your car. Look at your dashboard when your key is in the on position.
- Press the Trip Meter Reset Button after turning off the engine.
- Re-start the vehicle.
- Keep pressing the reset button.
- Reset button released
How can I turn off the Toyota maintenance is required light?
Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
How do I stop the needed maintenance?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
How is the mileage reset after an oil change?
Get behind the wheel of a pre-2005 GM vehicle, shut the door, turn the ignition to the auxiliary power position, wait for the lights to come on, then quickly depress the accelerator three times within five seconds after turning the key. When the counter has been reset, the oil light should flash.
Use this process on a GM model from 2006 or later, however keep in mind that some cars have slightly different button locations to hit to reset.
Turn the key to the auxiliary power position while sitting behind the wheel and with all the doors closed. After finding the oil life message by scrolling through the options on the Driver Information Center (DIC), press and hold the enter key for one second before letting go. There will be a reset notice on the DIC.
Why does my maintenance light come on after I change the oil?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.