Your 2016 Toyota Highlander’s maintenance light is there to alert you that you need to have maintenance done on your SUV. Normally, a mechanic or a dealership will reset the light after they complete the work, but if they forgot or you are performing the work yourself, you will need to do so. It’s not too difficult to reset the light. Simply turn the ignition key to the “on” position while the engine is off. Once the mileage appears on the display, press the odometer. Switch off the ignition. After that, hold down the odometer button while watching for the maintenance light to blink and then go out. After a few thousand miles, the light will turn on again to warn you to service your car once more. This will reset the light.
1) With the engine running and the vehicle in Park, push the ODO/Trip button until “Trip A” appears. Stop the engine. 3) Press the “Start/Stop” button twice while holding down the ODO/Trip button without applying the brake. Hold ODO/Trip as the reset display ticks down, then let go.
In This Article...
How can I turn off the Toyota Highlander’s maintenance is required light?
Toyota Highlander Maintenance Light Reset Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for another 10 seconds or so. You can hear a beeping noise in addition to the maintenance light beginning to flash. The light ought should thereafter go out.
How can the maintenance needed light be turned off on a 2016 Toyota?
How Can the Maintenance Required Light Be Reset?
- Turn on your car. Look at your dashboard when your key is in the on position.
- Press the Trip Meter Reset Button after turning off the engine.
- Re-start the vehicle.
- Keep pressing the reset button.
- Reset button released
How can you turn a Toyota’s maintenance needed light back on?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
How is the maintenance needed light reset?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
How can the maintenance needed light on a Toyota push start be turned off?
It only takes a few minutes to get the hang of turning off the maintenance light on a Toyota Camry, but you’ll need to act quickly! To be ready for each stepthe timing might be trickywe advise reading the instructions several times before you begin.
- Switch to position one after inserting your key into the ignition. The first set before starting the engine is this.
- Turn the key to position two while pressing and holding the odometer button on the dashboard.
- When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
- Pull back on the odometer button, then turn the key.
- When you turn on your automobile, if the light is off, the procedure is finished.
- If the light is still on, try it again.
What does the triangle in a Toyota Highlander with the exclamation point mean?
Have you ever been operating your Toyota Highlander when a symbol suddenly appeared on the dashboard? If so, then every sign has a unique meaning. Everybody occasionally gets a visit from a dashboard light.
While some lights are only indicators, others are alarms indicating your Highlander requires regular upkeep or repairs. It’s crucial to understand what each dashboard light on your vehicle indicates.
An indication light is any light that appears on the Toyota Highlander’s dashboard and is either blue or green. A light that alerts you that anything in your car is on is what an indicator light does exactly as it sounds. The majority of the time, it indicates on your dashboard whether a Highlander feature has been activated or canceled.
Some of the typical warning lights that you might see are listed below:
- TRAC OFF Indicator: This light appears to alert you to the need to turn off the vehicle’s traction control and/or stability control systems.
- An emblem in the shape of a key will display on your Toyota Highlander’s dashboard to let you know that the security system is operating as intended.
- An icon resembling a speedometer serves as a visual cue that the cruise control system is engaged.
- Turn Signal Indicator: These green lights signify that the Highlander’s right or left turn signal has been engaged.
- Headlight High Beam Indicator: This blue light signifies the active state of the headlight high beams.
- The VSC/TRAC OFF Indicator shows whether the traction control or vehicle stability control systems are activated or off. To turn off the light, push and hold the switch while the car is still moving.
Your Toyota Highlander will have a warning light if it has a yellow or red light. A warning light is typically an issue that needs to be resolved right away in order to keep your SUV in the finest condition possible. If you notice any of the lights listed below, get in touch with our service staff to arrange a visit:
- Master Warning Light: When the master warning system detects a problem, a triangle with an exclamation point inside of it shows on the dashboard and a buzzer sounds.
- When an icon resembling an old-fashioned oil can appears, it means your oil pressure is too low and should be checked. Low Engine Oil Pressure Warning Light: You should take immediate action to address this problem in order to prevent potential engine damage.
- Electric Power Steering (EPS) Warning Light: It’s critical to have your Highlander evaluated if this warning light, which looks like a steering wheel next to an exclamation point, comes on your dashboard.
What does the Toyota Highlander’s maintenance required light mean?
Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.
This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.
To manually reset the system to turn off the light, however, follow these instructions:
When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.
Why, after an oil change, is my maintenance required light still on?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.
How do you turn a 2016 Toyota 4Runner’s maintenance light back on?
Usually, even after servicing, a vehicle’s maintenance light needs to be manually reset. So don’t be alarmed; this is very natural.
Follow these fast and simple procedures to reset the maintenance light on your 2016 Toyota 4Runner:
- Alternately, turn the ignition to auxiliary mode or ON. Never start the car.
- To see ODO, press the trip display.
- Switch the ignition to “OFF.”
- While turning your car back on, keep holding down the trip reset button.
Now that the maintenance indicator should be off, you can drive a little more comfortably knowing that your vehicle is up to date.
With Jerry, there is still another method to drive safely. The Jerry app instantly compiles rates from more than 50 leading insurance providers, including Nationwide and Allstate! Once you’ve decided, they even assist you in canceling your old coverage.
Why does my Toyota state it needs maintenance?
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- If the car is on, turn it off.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- The ODO display will briefly flash before beginning to display only zeros.
- Now the light will read “MAINT REQD.”
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Press and hold the ODO reset / readout button while the engine is off.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
My maintenance is necessary light is on, why?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.