How To Turn Off Maintenance Light On Toyota Highlander 2015

1. Switch on the engine (one position before starting engine).

2. Verify the trip meter Readings are displayed. Switch off the ignition. Go to step three.

Vehicles with smart key system

1. Slightly depress the “ENGINE START STOP” switch (do not start engine).

2. Verify the trip meter Readings are displayed. Switch off the ignition.

3. Press the “ENGINE START STOP” switch once while simultaneously pressing the Trip Meter reset button (do not start engine).

Without multi-information display: Continue to press and hold the button until the trip meter displays “000000.

4. To make sure the indicator has been reset, turn off the ignition and start the engine.

Vehicles with colour multi-information display

1. To change the display to SETTINGS while the engine is running, use the controls on the right side of the steering wheel.

2. From the SETTINGS menu, choose MAINTENANCE SYSTEM.

3. To reset the system, choose YES.

4. “Initilization Completed” will be shown when the reset is finished.

Hybrid

1. Switch on “POWER” once (do not start engine).

3. Verify the trip meter Readings are displayed. Switch off the ignition.

4. The “POWER switch must be put in ON mode while depressing the trip meter reset knob (do not start engine). Press and hold the button consistently until the trip meter reads “000000.”

5. To make sure the indication has been reset, turn off the ignition and then turn on the engine.

How can the maintenance needed light be turned off on a 2015 Toyota Highlander?

Toyota Highlander Maintenance Light Reset Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for another 10 seconds or so. You can hear a beeping noise in addition to the maintenance light beginning to flash. The light ought should thereafter go out.

What does Toyota Highlander 2015 maintenance necessary mean?

On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.

How can the maintenance needed light on a Toyota push start be turned off?

Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.

How can you turn a Toyota’s maintenance needed light back on?

In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.

Why does my Toyota Highlander indicate that it needs maintenance?

Numerous Toyota Highlander models come with maintenance alert systems that notify the driver when routine maintenance needs to be performed. The maintenance reminder most frequently illuminates due to oil changes. The light ought to be reset as part of the oil change process by a Toyota dealer. If your mechanic doesn’t reset it or if you perform the repair yourself, you can reset the maintenance is necessary light by yourself.

Step 4

When the maintenance required light blinks a few times before going out, let go of the odometer button.

Toyota Motor Sales, USA, Inc., “2010 Highlander Owner’s Manual,” 2009

Why, after an oil change, is my maintenance required light still on?

Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.

How to Reset Maintenance Data on Toyota Corolla

You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:

1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,

2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.

3. Hold the button down while continuing to push it until the trip meter reads 000000.

When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.

Why does my car indicate maintenance is needed following an oil change?

  • If the car is on, turn it off.
  • Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
  • Now the light will read “MAINT REQD.”
  • The ODO display will briefly flash before beginning to display only zeros.
  • Press and hold the ODO reset / readout button while the engine is off.
  • Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
  • Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.

What ‘MAINT REQD’ Means

Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.

Need Help?

Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!

My maintenance is necessary light is on, why?

The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.

The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.

When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.

How is the oil change reminder reset?

Reset Oil Change Indicator

  • Turn on the ignition.
  • Both the stop and accelerator pedals should be fully depressed.
  • Maintain firm pressure on the brake and accelerator pedals.
  • A notice verifying the reset process is ongoing appears after three seconds.

How can I turn off the maintenance is necessary light?

How do I turn the “Maint Reqd” light back on?

  • Switch the ignition to the ON position.
  • Set the trip display to TRIP A mode on the odometer.
  • Activate the OFF position on the ignition switch.
  • Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
  • It will do so via the service maintenance reminder light.

How can the maintenance light be turned off on a 2019 Toyota RAV4 push button start?

How to Extinguish the Toyota RAV4’s Maintenance Light

  • Put the ignition on with your key. Turn the key to the first position.
  • On the dashboard, press the reset trip meter button. Hold it down for a couple of seconds.
  • Hold the odometer button down for another five or so seconds.
  • Release the odometer button after it is off.