Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
In This Article...
How can a push-button start Toyota Camry’s maintenance light be reset?
Have you changed your oil or had other standard vehicle maintenance performed, but the light is still on? When you are driving through the Buford and Alpharetta areas, this can be annoying and disconcerting. Do not worry! Resetting the maintenance light on your Toyota Camry is a simple procedure. Simply adhere to the instructions below:
- Turn the ignition to position one after inserting your key (the first position before actually starting the car).
- Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position.
- Hold the odometer button down for a further 10 seconds. You can hear a beeping noise in addition to the maintenance light beginning to flash. The light ought should thereafter go out.
- Release your grip on the odometer button once the maintenance light has gone out, then turn the key to start your automobile. Once your Camry starts, the light ought to be off. To stop the Toyota Camry’s maintenance light from coming on, perform this procedure one or two more times.
How can my Toyota maintenance be reset?
How Can the Maintenance Required Light Be Reset?
- Turn on your car. Look at your dashboard when your key is in the on position.
- Press the Trip Meter Reset Button after turning off the engine.
- Re-start the vehicle.
- Keep pressing the reset button.
- Reset button released
What should I do to remove the maintenance is required light?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
How can I turn off the Toyota check engine light?
It’s highly likely that your mechanic just forgot to reset the check engine light if it continued to illuminate even after your car had been repaired. But don’t panic; with just a few simple steps, you can turn off the check engine light on your 2017 Toyota Camry.
- Make sure the odometer is visible before starting the car.
- Hold the reset button on your trip meter while you turn off your car.
- While keeping the button pressed, turn the key slowly into accessory mode.
- Your odometer readings ought to vanish. You can release the reset button once they come back.
You may drive with a little more assurance that your automobile is in good shape now that you have managed to turn off your persistent check engine light. Download the Jerry app to see how much you may save on your auto insurance before you get back on the road.
The Jerry app, a registered broker that provides end-to-end support, compiles reasonable rates, assists you in switching plans, and even assists you in terminating your old policy. Every year, the typical Jerry user saves $879.
Why does my maintenance light come on after I change the oil?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.
Why is my Toyota Camry’s maintenance light on?
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- The ODO display will briefly flash before beginning to display only zeros.
- Press and hold the ODO reset / readout button while the engine is off.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Now the light will read “MAINT REQD.”
- If the car is on, turn it off.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
On a 2013 Toyota Tundra, how do you turn the maintenance light back on?
- Without starting the engine, turn the ignition to the “On position. If your car has a push-button ignition, press “Start” without depressing the brake pedal.
- By pushing the display change button or “Trip button,” you can change the display to “Trip A.”
- Completely shut off the car.
- Keep holding down the “Trip button.”
- Hold the “Trip button down while turning the ignition to “On without starting the car.
- Release the “Trip button” whenever the trip meter reads “all zeros.”
On a 2015 Toyota Camry, how do you turn off the check engine light?
If the problem or code that caused your 2015 Toyota Camry’s check engine light to come on is resolved, it will typically turn off by itself. For instance, if a loose gas cap was the reason your check engine light came on, the light will automatically switch off once the gas cap is tightened.