- Turn the key to the lock using your keys “Put the ignition in the “on” position but don’t start your Toyota Corolla. Put the Corolla’s keys in.
- Find, select, and hold the “The odometer has a reset button for trips. till you release the button “On the screen, Trip A can be seen.
- then replace the key to “Off.
- Turn the key back to the “On position after finding the “trip reset button once more.
- Hold the trip reset button down until your odometer lights 0 miles. The maintenance light will thereafter go out.
In This Article...
What does the 2010 Toyota Corolla’s maintenance required light mean?
On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.
How can the maintenance needed light on a 2010 Toyota Camry be reset?
Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for a further 10 seconds. You can hear a beeping noise in addition to the maintenance light beginning to flash. The light ought should thereafter go out.
Why is the Toyota Corolla’s maintenance required light on?
Even the smallest elements, like dashboard lights, give each car a unique look. Knowing what each light indicates and what to do when one comes on might be challenging. While some lights are merely warnings, others are critical and must not be disregarded. By addressing the query, “What does it signify when the maintenance light is blinking in my Corolla?,” we hope to assist you better understand your Toyota warning lights.
What does the maintenance required light mean?
Other automakers don’t offer a dashboard light like the maintenance required light, which is present on Toyota automobiles (MAINT REQD). Many new Toyota drivers could mistakenly believe that this light is the check engine light, but it actually represents a completely different warning. According to the distance travelled on the vehicle’s maintenance plan, the maintenance required light alerts you that repair is necessary.
How can the maintenance needed light on a Toyota push start be turned off?
Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
How can the dashboard lights be turned on in a 2010 Toyota Corolla?
Congratulations on purchasing your first automobile! I’m delighted to report that the Corolla’s *dashboard light controls** make it simple to turn on and adjust your dashboard lights. Use them as follows.
Typically, when you start your automobile, your dashboard lights should come on. If they don’t, your dashboard light controls may have them completely dimmed.
Find the dashboard light switch to the left of the steering wheel once your car is running. This will either be a knob or a wheel, depending on the year of your Corolla. Next to the control, you should see a tiny image of your speedometer. You can adjust the brightness or dimness of your dashboard light with the control.
If the dashboard lights are still not functioning, a fuse may have blown. Although they are quite simple to replace, you’ll need to see a professional.
It’s a big thing getting your first car! You might have to pay more for insurance if you’re a new driver or a young one. With Jerry, the insurance super app, you can make sure you’re getting the most affordable insurance imaginable! For free, instant, affordable insurance quotes, download Jerry today!
Why does my Toyota’s maintenance indicator constantly flashing?
Toyota’s maintenance reminder system only serves to remind the motorist to have their car’s oil changed. The engine light will turn on after 5,000 miles of driving since the computer counts the engine’s mileage from the time it was reset. The system does not account for the changes between mild and extreme driving situations, load weight, towing, or weather conditions, all of which are significant factors that affect oil life because it is not algorithm driven, unlike other more sophisticated maintenance reminder systems.
Because of this, people who regularly tow or drive in adverse weather conditions and require more frequent oil changes may find the maintenance light ineffective. However, for individuals who frequently use the motorway in good weather, it might not be practical. This is not to suggest that a driver should completely ignore the maintenance light. Keep an eye on your driving circumstances throughout the year and, if necessary, have a professional assess your unique, most frequent driving conditions to determine whether or not your car need servicing.
The table below can help you estimate how frequently you would need to change the oil in a current car (earlier cars typically require more regular oil changes):
What does a 2010 Toyota Camry maintenance required mean?
You may reset the Toyota Camry’s maintenance required light using the instructions in this article. For a Toyota Camry of the fifth generation, the process is the same (20072011).
The “maint reqd” indicator on the Toyota Camry simply indicates that a service interval has been reached. The need for new engine oil follows from this. 5,000 miles after the last reset, it turns on.
This light only turns on as a result of those miles; it has no means of knowing if your oil has been changed or not since then, and it never, ever indicates a problem. so that when it appears on your dashboard, your heart doesn’t slightly skip a beat.
My maintenance is necessary light is on, why?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.
Why does my car indicate maintenance is needed following an oil change?
- The ODO display will briefly flash before beginning to display only zeros.
- Now the light will read “MAINT REQD.”
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- If the car is on, turn it off.
- Press and hold the ODO reset / readout button while the engine is off.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
What happens after I change the oil in my car?
Reset Oil Change Indicator
- Turn on the ignition.
- Both the stop and accelerator pedals should be fully depressed.
- Maintain firm pressure on the brake and accelerator pedals.
- A notice verifying the reset process is ongoing appears after three seconds.
Can I drive my automobile even though it needs maintenance?
Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.
This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.
To manually reset the system to turn off the light, however, follow these instructions:
When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.
How can the VSC light on a 2010 Toyota Corolla be reset?
Vehicle Stability Control, or VSC as it is commonly known, is the stability control system used in Toyota automobiles. By lowering or eliminating the power provided to your wheels, stability control aids in the maintenance of traction and control in your vehicle. By automatically providing brake pressure to up to three wheels, it achieves this. The system’s main objective is to keep your car traveling in the direction of its wheels. Since 2012, at least in the USA, it has become a necessary safety requirement. Naturally, VSC OFF denotes that your Toyota’s stability control is turned off.
VSC Light Easy Fix
Depending on the model year of the Toyota, a button with the same icon as the light in your gauges will be located either next to your shifter or next to your steering wheel. When you’ve found it:
- Ensure that you have come to a complete stop. If you can, put the car in park.
- For a few seconds, hold down the VSC button.
- The indicator lights for TRAC OFF and VSC OFF will turn on. Now both systems are off.
- Once more, press the VSC button. As soon as both lights go out, the systems are back in operation.
If the VSC OFF light is still on, there can be a glitch in your car’s computer or a problem with the VSC system. Bring your car to a Toyota service location near you so a qualified technician can check the codes and identify the problem. Although it is safe to drive your Toyota even with the VSC OFF light on, we advise caution, especially in bad weather.
In Need of Repair?
Bring your car to the Toyota of Arlington servicing facility if you live close to Chicago and need repairs. We can install OEM parts for you because we have access to them. Get a free estimate from our outstanding collision facility if you need body work.
How can you turn a Toyota’s check engine light back on?
It’s highly likely that your mechanic just forgot to reset the check engine light if it continued to illuminate even after your car had been repaired. But don’t panic; with just a few simple steps, you can turn off the check engine light on your 2017 Toyota Camry.
- Make sure the odometer is visible before starting the car.
- Hold the reset button on your trip meter while you turn off your car.
- While keeping the button pressed, turn the key slowly into accessory mode.
- Your odometer readings ought to vanish. You can release the reset button once they come back.
You may drive with a little more assurance that your automobile is in good shape now that you have managed to turn off your persistent check engine light. Download the Jerry app to see how much you may save on your auto insurance before you get back on the road.
The Jerry app, a registered broker that provides end-to-end support, compiles reasonable rates, assists you in switching plans, and even assists you in terminating your old policy. Every year, the typical Jerry user saves $879.