Even after you have service performed, your vehicle’s maintenance light normally won’t automatically reset. Either you or your mechanic will need to manually reset it.
Fortunately, this is a straightforward procedure, and by following these easy steps, you can turn off the maintenance necessary light on your Toyota Tundra:
- Turn your key once to the ON position to activate accessory mode on your Tundra.
- Turn the trip odometer knob until Trip A appears.
- Press and hold the trip odometer knob while you turn off your car.
- Holding down the knob, restart accessory mode on your Tundra.
- Holding down the knob will cause Trip A to appear once more.
- The maintenance light will be reset if you restart the automobile after turning it off.
You can drive a little more at ease now that your maintenance light has been reset. Check out the Jerry app to see how much you can save on your auto insurance rate before you head back out. Jerry finds the greatest offers and sends them free to your phone in a matter of minutes after comparing individual rates from more than 50 leading companies, including Nationwide and Travelers.
In This Article...
How can you get rid of the need for maintenance?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
How can the check engine light be turned off on a 2013 Toyota Tundra?
If the problem or code that caused your 2013 Toyota Tundra’s check engine light to come on is resolved, it will typically turn off by itself. For instance, if a loose gas cap was the reason your check engine light came on, the light will automatically switch off once the gas cap is tightened.
How can I turn off the Toyota maintenance is required light?
Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
Why, after an oil change, is my maintenance required light still on?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.
How can I turn off the Toyota Tacoma’s maintenance is required light?
The convenience of having a car-savvy family member must be incredible! Yes, you can manually reset your light as you are aware that your car is in good condition.
Turn off your vehicle, then push and hold the odometer reset button to turn off the maintenance light on a Toyota Tacoma. Odo/Trip is the typical label for this button. Hold the button down as you restart the ignition of your car.
Your maintenance light ought to be back on now! By starting your car as usual and waiting a few seconds, you can ensure that the light remains off. Visit a professional to ensure that your automobile and your sensors are in good working order if the light does indeed come back on.
Although automobile repairs might be expensive, Jerry can help you save money on other auto-related costs. Jerry is a free insurance comparison software that checks around for the best deals with more than 50 different insurance providers. You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have. Every year, the typical Jerry user saves $879.
Why does my Toyota state it needs maintenance?
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Press and hold the ODO reset / readout button while the engine is off.
- If the car is on, turn it off.
- Now the light will read “MAINT REQD.”
- The ODO display will briefly flash before beginning to display only zeros.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
How can you turn a Toyota’s oil light back on?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
My maintenance is necessary light is on, why?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.
How far can you go when the maintenance light turns on?
The oil light suddenly came on. You’re clueless as to why. And to make matters worse, you don’t really have a lot of time right now to worry about it.
How long can you drive with this object is in your face, you ponder. wonderful question We’ll respond to it and explain why it could have initially surfaced. Move along!
How Long Can You Drive With Oil Light On?
If the oil light comes on, you should try to get a repair to look at your car as soon as possible. However, keep in mind that a little more driving around won’t harm anything.
Typically, it takes about two weeks or 500 miles of driving before a flashing oil light becomes a serious issue. However, once that happens, things can quickly deteriorate and cause significant mechanical damage. Therefore, attempt to get your car serviced as soon as possible.
There’s Not Enough Oil in the Car
Numerous issues, including blown head gaskets and broken valves, can cause engines to leak oil. Whatever the case, if oil leaks from your car, it will begin to suffer and may eventually sustain catastrophic damage. As a result, the oil light will turn on when there isn’t enough oil in the vehicle.
The Vehicle’s Oil Pressure Is Low
A vehicle needs enough oil pressure to operate at peak performance. However, keep in mind that a number of things (such as an obstructed oil filter, a broken pressure gauge, insufficient engine oil, etc.) could cause the oil pressure to go too low. This will cause the oil light to come on.
The Oil Pressure Sensor is Malfunctioning
The malfunction of your oil pressure sensor may also cause your oil light to come on. Randomly, this happens, usually as a result of normal wear and tear. If the problem is not corrected, your car won’t have enough oil pressure, which will eventually cause more harm.
The Oil Pump Is Bad
A car’s oil pump may eventually fail as a result of wear and tear on the vehicle. The oil light will unquestionably respond to this. The only option at that point would be to replace the pump since if you don’t, your engine would experience increased friction and end its life much earlier than it should.
Is Your Oil Light Still On?
We have a group of expert vehicle repair specialists who will locate the cause of your check engine light before taking steps to fix it.
How is the dash light reset following an oil change?
Reset Oil Change Indicator
- Turn on the ignition.
- Both the stop and accelerator pedals should be fully depressed.
- Maintain firm pressure on the brake and accelerator pedals.
- A notice verifying the reset process is ongoing appears after three seconds.
How can the check engine light on a 2018 Toyota Tundra be reset?
If the problem or code that caused your 2018 Toyota Tundra’s check engine light to come on is resolved, it will typically turn off by itself. For instance, if a loose gas cap was the reason your check engine light came on, the light will automatically switch off once the gas cap is tightened.