How To Turn Maintenance Light Off Toyota Corolla 2015

Turn the key back to the “On position after finding the “trip reset button once more. Hold the trip reset button down until your odometer lights 0 miles. The maintenance light will thereafter go out.

What does a 2015 Toyota Corolla’s maintenance required light mean?

On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.

On a 2015 Toyota Sienna, how do you turn the maintenance light back on?

If mechanics neglect to reset the maintenance alert after servicing the car, it may become an annoyance. Fortunately, a 2015 Toyota Sienna’s maintenance light is simple to reset.

Simply adhere to these guidelines to restart the light:

  • The maintenance is necessary light needs to be reset.
  • Shut down the van.
  • A key is turned to the on position. Alternatively, if your vehicle has a push-button start, you can depress the button twice while keeping your foot off the brake.
  • To get the Trip A reading, press the trip odometer button on the instrument cluster.
  • In addition to pressing and holding the trip odometer button, restart the engine of the car.

You obviously care about your automobile if you take such good care of your Sienna. Therefore, make sure your car is fully insured without paying too much. It is quick and simple with the Jerry app.

Jerry is a certified insurance broker who obtains rates from numerous reputable and highly rated auto insurance providers. Jerry can assist you in purchasing insurance and terminating your current policy after you discover a fantastic quote for your 2015 Toyota Sienna. Customers often save close to $900 annually!

How do I reset the needed maintenance?

The Maintenance Required Light that flashes on the instrument panel is reset using the processes that Lexus walks us through.

Remember, this process should be used to reset the light when maintenance has been performed:

  • the ON position on the ignition switch
  • Set the trip display to TRIP A mode on the odometer.
  • Switch the ignition to the “OFF” position.
  • Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
  • The service reminder light for maintenance will

The Trip Meter RESET button should be released.

7. Insert the key in the OFF position.

8. Ensure the Service Maintenance Reminder Light turns off by turning the ignition to the ON position. NOTE: If the light in step 5a keeps flashing, turn off the ignition and follow the steps from step 1 again.

How can the maintenance needed light on a Toyota push start be turned off?

Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.

Why, after an oil change, is my maintenance required light still on?

Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.

How to Reset Maintenance Data on Toyota Corolla

You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:

1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,

2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.

3. Hold the button down while continuing to push it until the trip meter reads 000000.

When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.

Why does the maintenance required message on my Toyota Corolla?

  • Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
  • Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
  • The ODO display will briefly flash before beginning to display only zeros.
  • Press and hold the ODO reset / readout button while the engine is off.
  • Now the light will read “MAINT REQD.”
  • If the car is on, turn it off.
  • Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.

What ‘MAINT REQD’ Means

Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.

Need Help?

Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!

Vehicles without smart key system

1. Switch on the engine (one position before starting engine).

2. Verify the trip meter Readings are displayed. Switch off the ignition. Go to step three.

Vehicles with smart key system

1. Slightly depress the “ENGINE START STOP” switch (do not start engine).

2. Verify the trip meter Readings are displayed. Switch off the ignition.

3. Press the “ENGINE START STOP” switch once while simultaneously pressing the Trip Meter reset button (do not start engine).

Without multi-information display: Continue to press and hold the button until the trip meter displays “000000.

4. To make sure the indicator has been reset, turn off the ignition and start the engine.

Vehicles with colour multi-information display

1. To change the display to SETTINGS while the engine is running, use the controls on the right side of the steering wheel.

2. From the SETTINGS menu, choose MAINTENANCE SYSTEM.

3. To reset the system, choose YES.

4. “Initilization Completed” will be shown when the reset is finished.


1. Switch on “POWER” once (do not start engine).

3. Verify the trip meter Readings are displayed. Switch off the ignition.

4. The “POWER switch must be put in ON mode while depressing the trip meter reset knob (do not start engine). Press and hold the button consistently until the trip meter reads “000000.”

5. To make sure the indication has been reset, turn off the ignition and then turn on the engine.

How can I turn my car’s service light back on?

First, turn on the engine. Step 2: The display will say “Service required” if a service is overdue. Locate and press the OK button at the top right of the steering wheel for longer than one second to clear this message. The service interval will be reset to its default value in Step 3.

When your maintenance light illuminates, what should you do?

Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.

This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.

To manually reset the system to turn off the light, however, follow these instructions:

When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.

How can my Toyota maintenance be reset?

A Toyota Maintenance Light Reset

  • In order to start the car, turn the ignition to position one after inserting your key.
  • Turn your key to position two after pressing and holding the trip meter reset button on the dashboard.
  • Hold the odometer button down for a further ten seconds.

How often should an oil change be performed on a 2015 Toyota Corolla?

For traditional oil, Toyota advises changing your 2015 Toyota Corolla’s oil and filter every 3,000 to 5,000 miles. Naturally, synthetic oil needs to be changed every 7,500 to 10,000 miles.