Turn the key back to the “On position after finding the “trip reset button once more. Hold the trip reset button down until your odometer lights 0 miles. The maintenance light will thereafter go out.
In This Article...
On a 2010 Toyota Corolla, how do you turn the maintenance light back on?
Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for around 10 seconds. A buzzer sound and the maintenance light should start to flash. The light ought should thereafter go out.
How can I erase the maintenance reminder on my Toyota?
Turn your key to the second position after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a total of 10 seconds. The light ought to flash, potentially beep, and then go off as a result. Release the odometer button once it has been turned off, then start the automobile.
How can I remove Maintenance Minder?
Every time one of the necessary maintenance tasks is finished, such as an oil change, tire rotation, air filter replacement, etc., your Honda Maintenance Minder light needs to be reset. Your maintenance reminder light shouldn’t need to be reset if you have your Honda serviced at a dealership. It should be done for you by the expert who completed your services. However, if you are performing your own maintenance on your Honda or if the technician neglected to reset the light for you, follow these easy steps to do it yourself.
Resting Honda Maintenance Minder Light
Depending on the vehicle, the light resets differently. Depending on the type of car you have, I’ll outline a few possible approaches.
st Method
The trip button is still present on several Honda vehicles, like the civic. This stalk protrudes from your dashboard and is typically used to select the information you wish to appear there or to reset your journeys. The only thing you need to utilize with this technique to turn off the maintenance reminder light is…
Release the trip button after it begins to flash, then press it once more. I’m done now. Now, the oil life ought to read 100%.
nd Method
On the lower right-hand side of the steering wheel of some Honda vehicles, there are up and down arrows with a reset button situated between them. These buttons are located on the steering wheel of some Honda SUVs, such as the Pilot. These are the only three buttons you will need to press when using this method.
In order to see the oil life percentage shown on the dash, press the down arrow button.
Hold down the reset button while waiting for the cancel or reset options to appear on the dash.
Press the up arrow to choose reset. Likewise, choose this option and press the reset button; the oil life should now read 100%.
rd Method
Any Honda trim model that has a touch screen and a home screen should be compatible with this technique.
You’ll be prompted with a screen that asks if you’re sure you want to reset it or not. Resetting should fix the issue. The oil life should read 100% and your maintenance minders should no longer be present.
Follow the link below for a list of maintenance minders and what they signify if you have a maintenance minder light on but are unsure of what it means.
How can the maintenance needed light on a Toyota push start be turned off?
It only takes a few minutes to get the hang of turning off the maintenance light on a Toyota Camry, but you’ll need to act quickly! To be ready for each stepthe timing might be trickywe advise reading the instructions several times before you begin.
- Switch to position one after inserting your key into the ignition. The first set before starting the engine is this.
- Turn the key to position two while pressing and holding the odometer button on the dashboard.
- When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
- Pull back on the odometer button, then turn the key.
- When you turn on your automobile, if the light is off, the procedure is finished.
- If the light is still on, try it again.
On a 2016 Toyota Camry, how do you reset the maintenance light?
Push the odometer button on the dashboard quickly and hold it there while turning the key to the second position. You should see the maintenance light blink if you hold down the odometer button for roughly 10 seconds. Also possible is a beeping sound. The light should then turn off at that point.
How can you turn a 2017 Toyota Camry’s maintenance light back on?
Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for a further 10 seconds. You can hear a beeping noise in addition to the maintenance light beginning to flash. The light ought should thereafter go out.
Why does the maintenance required message on my Toyota Corolla?
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- The ODO display will briefly flash before beginning to display only zeros.
- If the car is on, turn it off.
- Press and hold the ODO reset / readout button while the engine is off.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Now the light will read “MAINT REQD.”
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
Why, after an oil change, is my maintenance required light still on?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.
How can you turn a Toyota Corolla’s oil light back on?
In order to make “Trip A” appear on the main screen, press and hold the trip reset button next to the odometer. Reset the key to “Off.” Turn the key back to the “On position while pushing the button to reset the trip.
The meaning of the maintenance reminder light
A: The Maintenance Minder does more than just signal when to change the oil. The Maintenance Minder is intended to serve as a reminder for all maintenance needs. You should perform the suggested service and reset the Maintenance Minder light if your Maintenance Minder indicates that maintenance is necessary.
What does upkeep minder A do?
When an oil change and routine maintenance are required, the Maintenance Minder System employs the on-board computer to continuously monitor the engine’s operating characteristics, including speed, engine temperature, ambient temperature, time, and vehicle use.
What does “maintenance due soon” on your car mean?
The instrument panel houses the service due Warning Light. This light turns on to serve as a reminder that it’s time to maintain your car. The service due Warning Light is not a sign that anything is wrong with your automobile; instead, it is designed to turn on after a predetermined distance to serve as a reminder to have your car serviced.
You must reset the service due Warning Light after having your automobile serviced.