Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
In This Article...
How can I turn off my Toyota’s maintenance light?
To ensure that their Camry, RAV4, or other Toyota models are up to date on their maintenance plans, Lakeland drivers rely on their Toyota maintenance light to keep track of important services like oil changes, tire rotations, and more. After your car has been serviced, you’ll need to manually switch it off and reset the light so it can keep track of your car’s health. Follow the instructions below to reset a Toyota maintenance light:
- In order to start the car, turn the ignition to position one after inserting your key.
- Turn your key to position two after pressing and holding the trip meter reset button on the dashboard.
- Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
- Start the vehicle after releasing the odometer button. If the maintenance light on your Toyota RAV4, Highlander, Camry, Corolla, or any other model is still on, follow these steps just one or two more times to turn it off.
- If the issues persist, it’s possible that you’ll require more services if they do. Bring it to your neighborhood Toyota dealer so that it can be completely inspected and you can get back on the road.
How do I stop the needed maintenance?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
How can you turn a 2018 Toyota Camry’s maintenance light back on?
Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for a further 10 seconds. You can hear a beeping noise in addition to the maintenance light beginning to flash. The light ought should thereafter go out.
How can I turn my car’s service light back on?
First, turn on the engine. Step 2: The display will say “Service required” if a service is overdue. Locate and press the OK button at the top right of the steering wheel for longer than one second to clear this message. The service interval will be reset to its default value in Step 3.
What does “maintenance necessary” on a Toyota Camry mean?
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Now the light will read “MAINT REQD.”
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- The ODO display will briefly flash before beginning to display only zeros.
- If the car is on, turn it off.
- Press and hold the ODO reset / readout button while the engine is off.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!