How To Tow A Toyota Yaris

If towing is required, we advise hiring your local Toyota dealer or a professional tow truck service.

A cable or chain fastened to either the emergency towing eyelet on the front of the car or the right emergency towing eyelet beneath the rear of the vehicle can be used to temporarily pull your vehicle if a towing service is unavailable in an emergency. When hauling vehicles, proceed with utmost caution.

When towing your vehicle, only use the front towing eyelet on automatic gearbox vehicles.

See “Installing front towing eyelet” on page 232 in this Section for instructions on how to install the front towing eyelet.

Never pull a car from the back that has four wheels on the ground with an automatic transmission. The transmission could sustain severe harm as a result.

This type of towing is only permitted on hard-surfaced roads over a limited distance and at modest speeds. In addition, the drive train, steering, brakes, and wheels and axles must all be in good working order.

When hauling vehicles, proceed with utmost caution. Avoid making abrupt starts or unpredictable driving maneuvers that would put too much strain on the towing cable or chain and emergency towing eyelets. Eyelets, towing cable, and chain failure could result in severe injury or property damage.

Toyota 2019 Yaris is NOT flat towable.

We were using information from the Yaris owner’s manual, however there are several versions of owner’s manuals, and engineering modifications can happen in the middle of a model year. To ensure that the car they wish to acquire is authorized for flat towing, we always suggest readers to examine the owner’s manual that is included with it. MotorHome regrets any confusion caused by the outdated 2019 Guide to Dinghy Towing that is now available online.

Can you flat tow a 2010 Toyota Yaris?

Please let me know what setup would be best for my 2010 Toyota Yaris 5 door hatchback, which has 15-inch wheels. Thanks

Expert Reaction:

The right base plate kit is the first thing you’ll need to flat tow your 2010 Toyota Yaris 5 door hatch. The part # 521181-5 that you mentioned would be best for that since it has been proven to fit.

To flat tow your vehicle, you will also want the base plates, an appropriate tow bar, safety wires, illumination, and additional braking. The Falcon All Terain, model number RM-522, is the most widely used compatible tow bar. This has non-binding arms, which make connecting and disconnecting the setup incredibly simple.

We have the Roadmaster Falcon All Terrain package, part number RM-9243-1, which includes locks, covers for the tow bar, and lighting/safety cables under one part number. The included diode kit enables you to splice into the vehicle’s taillight wiring without having to drill into the taillight housings so that your RV can control the vehicle’s taillights. This includes enough coiled wire to connect from the front of your towed car to the RV as well as a round 6-way connector.

Finally, the vehicle being flat-towed must now have additional braking, as required by the majority of states. The Blue Ox Patriot # BRK2019, which applies the brakes in accordance to how much the tow vehicle is braking, is the simplest system to set up and use. The two vehicles will endure less damage and are stopped in the safest manner possible.

For the tow bar to be level when flat towing, you’ll probably also need a high low adaptor. I provided a link to a page listing every one we stock.

I’ve provided you with a few useful links to our posts on flat towing. For detailed instructions on flat towing your car, make sure to refer to the owner’s manual.

Which Toyota models are flat-towedable?

For instance, Toyota has a number of vehicles that appear to be perfect for flat towing. The Land Cruiser and the 4Runner are available for intrepid off-road travelers.

Can you flat tow a 2007 Toyota Yaris?

Can a manual transmission be towed? Toyota with a tow dolly and motorhome behind it that is front-wheel drive. And in which gear should I tow? 2007 Nissan Yaris

Your 2007 Toyota Yaris can be flat-towed, but if you decide to utilize a tow dolly, such as model number RM-2050-1, you’ll also need a 7-way connection, such as model number PK12706, to finish the wiring. You will place the front wheels on the dolly and shift the car into gear because it has a front wheel drive manual transmission. Make sure the parking brake is disengaged before using the wheel netting to attach the car to the dolly.

Can an automatic vehicle be flat-towed?

If an automatic vehicle is built to be towed in neutral, doing so is not terrible. The majority of automatic vehicles that can be flat-towed are built with the steering wheel unlocked and in neutral.

However, the owner’s manual or the vehicle manufacturer should be consulted for the correct settings and procedures before dinghy towing any car.

The automatic car could be able to be flat towed if it has a disconnect for the transmission. This feature is included in cars by the manufacturers to allow safe flat towing without harming the transmission.

If a car is not meant for RV towing, hauling it behind one can harm the transmission, steering system, and other parts of the automobile. If the transmission is not unhooked, fluid will keep pumping even while the engine is not running.

The automobile won’t be harmed as long as it is set up properly if the owner’s manual says it can be flat towed.

No AND yes. The type and model of the towing vehicles determine everything. Some automobiles use the transmission to calculate mileage. The miles may not be recorded on the odometer if the transmission is unplugged.

How is an automatic vehicle towed?

I recall reading about how to tow a car with an automatic transmission at some point. Some people in the conversation said there was no need to put the automobile on a flatbed trailer; they simply needed to put it in neutral and they were good to go. Even to detach the driving shaft was suggested by some. If you read the owner’s manual, it states that towing the car (with an automatic transmission) is not advised by just placing the car in neutral. The transmission can sustain damage if this is done. It advises that the car be transported using a flatbed truck. However, a vehicle with a manual transmission tows without any problemsjust put it in neutral.

Since I last read the thread discussion, I have not come across a convincing argument for why it is not recommended to tow a car equipped with an auto tranny by simply shifting it into neutral. I then went back to my sources.

Have a functioning account already? Register here. Choose one of the following to continue reading:

To flat tow my automobile, what do I need?

To flat tow a vehicle, you’ll need safety cables, an additional brake system, a towbar, a base plate kit put on the tow vehicle, a tow bar wiring kit so that the taillights on both the vehicle and the motor home function together, and a hitch on the motor home.

You must ascertain whether your car can be flat towed or if some modification is necessary in order to flat tow it safely.

I’ll provide you with links to some of our flat towing support articles. I’d be pleased to provide you with more detailed advice if you could reply with the year, make, and model of the car you want to flat tow.

Can an automated vehicle be towed behind a motorhome?

A car with an automatic transmission can be flat-towed in some situations. However, maintaining this can be expensive and challenging. The majority of RV dealers are capable of installing the required hardware to prepare your car for flat-towing.

How is a rear-wheel drive car towed?

The first challenge is getting rear-wheel-drive vehicles’ drive wheels off the ground in order to tow them. Your rear-wheel-drive car’s driveshaft connects the engine to the back wheels. You must unhook your rear-wheel-drive vehicle in order to haul it flat.

Can a 4 wheel automatic be towed?

You can securely tow a 4WD manual transmission vehicle on its wheels without harm if it has a locking hub and transfer case. If your vehicle lacks them, you will need to attach a connection device to the rear-end shaft in order to tow it.

It is feasible to tow an automobile while it is in park, but not if all four wheels are off the ground. In P-Mode, automatic vehicles feature a mechanical lock that can be damaged if the wheels are forced to move. To prevent any damage, it is safer to put it in neutral while towing.

Handbrakes typically serve to stop the back wheel from turning. Therefore, if you need to tow it while the handbrake is engaged, you should lift it from the back so that the front tires are the only ones turning.

Yes. You’ll need a towing trailer or a pull dolly to accomplish this. While a tow dolly raises either the front two or rear wheels of the car, trailers are useful if all four of your vehicle’s wheels aren’t working.

To prevent transmission damage if you have a rear-wheel-drive vehicle, you must disconnect the driveshaft before towing. Occasionally, shifting the car into neutral is insufficient.

Is it harmful to pull a car behind an RV?

Does towing a car damage it? is one of the main queries that tourists have. We are unable to provide a categorical “yes” or “no” since, in essence:

  • doing things properly
  • Preparation
  • a little bit of luck

Towing a vehicle behind an RV should not significantly harm the vehicle if done correctly. Each year, tens of thousands of tourists tow their vehicles, yet very few of them sustain any form of serious harm.

Towing does, however, carry the inherent risk of causing your car minor or major damage. The several sorts of damage that can happen while towing a vehicle are listed below.

What kinds of cars can a dolly tow?

There are a few crucial factors to think about when it comes to your tow dolly. Before buying a dolly, there are a few factors to take into account depending on the sort of car you own.

For front-wheel-drive vehicles with curb weights of 5000 pounds or less, a tow dolly is created. Although front-wheel and rear-wheel drive are quite common in many car models, it is best to verify your vehicle’s owner’s manual or with your dealer to find out what kind of power train it has. Making an assumption and maybe injuring your car because you believe it has front-wheel drive when it doesn’t is the last thing you want to do.

But after you’ve established whether your automobile can be hauled on a Car Tow Dolly, it’s simple to operate and effectively moves your car from one location to another because of the secure way it’s fastened to your car. an extra benefit? Your car’s rear wheels are separate from the mileage sensor, so you won’t accrue any additional miles while moving it.

Let’s now narrow down the kind of cars that can be pulled by your dolly.

What Can Be Towed On Your Dolly?

Your tow dolly is suitable with a wide range of vehicles. There are some vehicles, nevertheless, that are normally more compatible with your tow dolly than others depending on the requirements of your trip.

The following vehicles are frequently hauled behind a dolly:

  • Additional large sedans
  • Little Cooper
  • little cars
  • Honda Accord
  • Civic Hondas
  • Subaru Prius
  • Honda Accord

The majority of Toyota, Honda, Ford, and Nissan vehicles are compatible with our tow dolly. There are many vehicles that work better with your tow dolly, but as we just mentioned, it’s important to consult your owner’s manual to be sure. We have limitations on our car tow dolly that we impose in order to protect your safety.

We recommend attaching cars with curb weights under 5000 pounds, front axle weights under 3000 pounds, and outside tire-to-tire widths under 79 inches to our car tow dolly.