Blowing out a tire is frustrating, but it’s also a fantastic teaching moment.
To remove the spare tire from your Toyota Highlander, pull over to the side of the road and then follow these instructions:
- Pull the cloth tab by your trunk hook to reveal the trunk’s floor.
- There should be a couple slots with tire removal equipment there.
- The bent wire should have a hook at the end, which you should use to loop through the silver ring to your right.
- To lower the tire, anchor the top of the wire and turn it counterclockwise.
- Even when the tire reaches the ground, keep turning the wireyou’ll need extra slack to free the tire from the wire.
- With the wire, pry the tire out from beneath your automobile. Under the tire, there should be a platform and a sizable bolt with a wire in the middle.
- To release the bolt, push it through the tire’s hole.
- After changing your tire, place the old one on the platform, loop the bolt through its center, and then secure it to the underside of your automobile by turning the wire clockwise.
Hopefully, following these instructions will enable you to take the spare tire off your Highlander. Consult your owner’s handbook for extra instructions unique to your model if you’re still unsure what to do.
Consider saving on your auto insurance with Jerry because you’re already taking the effort to change your tire. The Jerry app, a certified broker, assists users in saving $879 annually on auto insurance on average. Simply download the app, respond to a few questions, and Jerry will provide you free assistance in comparing rates from more than 50 leading companies, including Progressive and Nationwide.
In This Article...
Where is the spare tire for the Toyota Highlander?
The spare tire for your Toyota Highlander is secured to the frame’s lower part behind the rear bumper. You’ll need a wrench and your key to remove it.
Say you’re driving your Toyota and enjoying the scenery. The air is suddenly pouring out of your front right tire as you unexpectedly roll over a rusty nail. You must first be aware of where and how to obtain your Highlanders spare tire before hastily searching online for information on how to change a flat tire.
How are tires changed on a Toyota Highlander from 2022?
Your Highlander Already Has the Tools
- First, find a safe place and turn on the emergency lights.
- 2. Take off the hubcap.
- Step 3: Insert the Jack, loosen the lug nuts, and raise the Highlander.
- Remove the lug nuts in Step 4 and mount the spare.
- 5. Tighten the lug nuts, then lower them and tighten them once more.
How long can a spare tire for a Toyota be used?
You can drive to the closest repair facility with the spare tire in order to have the flat tire evaluated and either repaired or replaced. With a donut-shaped spare tire, you should not travel faster than 50 mph or farther than 50 miles.
How is a spare tire changed?
Tire flat and stuck? Here are the 10 steps to changing a tire.
- Locate a Secure Overpass to Pull Over.
- Use the parking brake and your hazard lights.
- Inspect the materials.
- Take off the lug nuts.
- Your car should be raised off the ground.
- Remove the Tire and the Lug Nuts.
- Fix the spare tire to the vehicle.
- Switch out the lug nuts.
Do the 2020 Toyota Highlander’s spare tires fit all the way around?
To its credit, Toyota includes a spare tire with the Toyota Highlander. However, keeping it up is simple to forget.
Maintaining spare tires positioned underneath a car can be challenging. In this example, we’ll use a first-generation Toyota Highlander to show you how to take out, care for, and replace a spare tire. For some other Toyota models and some other makes that tuck the spare up under the back of the car, the process is the same. This narrative serves as a how-to manual for getting the spare tire down if you get a flat and are in immediate need of one.
Opening the cargo compartment and looking under the cargo floor is the first step in finding the spare tire in a Toyota Highlander. You can lower the spare tire using the special tools that are there. Next, set a work mat down. This helps to guarantee the tire has a landing location and keeps you clean. The plastic cover should then be unscrewed when you crawl up underneath the car (never while using a jack).
Return to your standing position at this point, and lower the tire using the small nut with the ring on top. To accomplish this, insert the ring into the nut slot to the right of the cargo area and turn the black wrench tool in the other direction. The spare tire for the Toyota Highlander will gradually descend to the ground.
Crank it down and then some more. After that, remove the tire and position it against the rear bumper upright. If the line you crank-down has enough slack, you can slide the retaining ring through the hole in the centre of the cover and rim. If not, crank again.