We frequently receive a lot of inquiries about Toyota Smart Key and push button start from prospective automobile buyers who stop by to visit us about purchasing a brand-new 2016 Toyota RAV4. It’s a useful feature for drivers, but many people looking to buy a car make reservations because they’re worried about what might happen if it breaks down. When we examine how to start your Toyota when Smart Key won’t work, take a look at some of the potential causes and how to handle each situation.
In This Article...
Reasons Why Toyota Smart Key and Push Button Start Won’t Work
Pressing the START button on your brand-new 2016 Toyota Camry and having the engine not start is one of the most discouraging experiences you can have. There are four main causes for this that might happen, and many of them are simple to fix. See how you can respond to the main causes of this, which are described below.
- You have a weak engine battery.
- The Toyota Smart Key battery is low.
- The brake pedal is not being pressed firmly by your foot.
- It’s possible that you pressed the Smart Key deactivation button by accident.
Some of these problems are far simpler to solve than others. The first thing to do is to check that your foot is firmly on the brake pedal. Without taking that simple step and firmly tapping the brake, this safety function will prevent you from starting the key.
Your key fob’s battery might be low if your 2016 Toyota Prius still won’t start. Try using a different Smart Key or bringing the key fob closer to the START button. Check your owner’s manual for advice on replacing the battery if this appears to be the issue.
Another possible explanation for why your Toyota won’t start with Smart Key is that you accidentally pressed the deactivation switch. A little-known component that can give you trouble is the Smart Key deactivation switch, which is situated below the steering wheel at the bottom of the instrument panel. You only need to turn a switch to resume your activities.
When you push the START button, your instrument panel may darken, which could be a sign that your car’s battery is low. Have a friend jumpstart your car for you if necessary, or check your battery connection. If this keeps happening, you might wish to make an appointment for service with the Toyota of Greensburg Service Department.
If my Toyota Smart Key is not functional, how can I start my car?
Holding the key fob as close to the start button as you can, depress the brake, and push the start button as you normally would if you are having difficulties starting your car using Toyota Smart Key. This will enable you to start the car by assisting the weak battery signal’s path to it.
If my key fob is broken, how do I start my car?
The process of starting the car is actually quite simple once you are inside. Automakers built the technology to function even with a broken remote since they are aware that your keyless ignition could need to function if the fob dies. Some vehicles have a manual start feature, while others have a keyless start feature integrated into the key fob.
Even if your automobile has keyless entry, you might not have realized that the steering column actually has a key slot. For instance, a lot of Mazda vehicles are outfitted in this manner. In reality, the “switch you turn” is a plastic cap that unscrews to reveal a key slot.
Use the key fob to push the START button if your keyless entry system doesn’t have a mechanical key slot; some manufacturers have a backup system that enables this method to function even if the key fob battery is dead. For instance, many newer Fords have a pocket in the center console or a slot on the steering column where you can insert the key fob itself and start the car.
If you find yourself locked out or unable to start the vehicle, visit the OEM website or contact roadside assistance. They’ll get you back on the road in no time. Carmakers have been moving away from the traditional key for a number of years now, and there’s no scenario they haven’t seen by now.
Why won’t my Toyota key turn?
You most likely need a new battery if your Toyota key fob just stopped functioning. To accomplish this, you must understand how to open a Toyota key fob so that you may access and replace the battery.
What do I do if my key fob stops working?
The Family Handyman claims that you can still start your car even if the battery in your key fob dies. Put the metal key back in the fob after using it to unlock your doors; then, instead of pressing the “start” button with your finger, use the fob. Many manufacturers utilize this backup device to make sure the car can start even if the key fob is dead.
Now, the Mini has a slot where the key fob can be inserted to start the vehicle. But at this time, this design seems a touch dated. This is why it’s always a good idea to consult your car’s manual.
Some Mazdas and a few other vehicles may have an actual key slot along the steering column, according to the Family Handyman. The least frequent method to start a car with a dead key fob is this, though.
Why won’t my key start my car?
The automobile key may not fit properly in the ignition to start the car if it is bent or worn out. If the key is bent, you can gently flatten it with a hammer, preferably made of rubber or wood, and then try to start the car again. Use your backup key if the original is worn out.
Why won’t my Toyota start?
Typically, all you need to do to solve an issue is jump start a dead battery (ideally using a jump box or portable battery charger) and let the alternator to recharge the battery for around 30 minutes.
After changing the battery, is the Toyota key fob required to be reprogrammed?
A remote key fob needs to be associated with your vehicle particularly in order to be secure.
This stops people who drive the same make and model of automobile as you from using their remote to access your car. You’ll need to reprogram the fob if changing the batteries has erased this connection or if it was somehow disrupted in order for it to once again recognize your automobile.
Standard programming sequence
Your key fob can typically be reconfigured by following this typical procedure:
Instead of starting and then returning to the locked position, turn the key into the run position. Repeat this multiple times.
You’ll typically hear a chime or other sound when you’ve cycled the key enough times. At that point, you can push the lock or unlock button on your key fob to hear another chime.
How do I find out which battery my key fob uses?
Open your fob to find the battery your automobile key fob uses. There will probably be an engraving that starts with CR followed by a string of digits if the item contains a battery. Check your owner’s manual or search online for your car’s make, model, and year without a battery or engraving.
Will changing the battery on my key fob make it work again?
A dead battery is the most frequent cause of a key fob not functioning. Having said that, your keyfob might be having more serious issues. A key fob replacement or even automobile door lock repair may be necessary if it stops operating after a battery change.
How do I know if changing my key fob battery will fix my car key?
When the key does not function under any conditions, it is likely that the car key fob has a dead battery. On all door locks, all buttons have the same lack of effectiveness. When buttons are pressed, no lights illuminate, suggesting that no signal was transmitted. The backup fob, however, functions flawlessly.
What do I do if my key fob is not working after a battery change?
Before you replace the automobile remotes if your key fob still won’t work after a battery change, make sure your locks are operating properly. Additionally, make sure you didn’t unintentionally deprogram your keychain.
Can you fix a key fob not working after a battery change?
Although replacing the remote’s batteries might be the quickest repair for the problem, this is by no means your only option. Check to see if the key fob or the vehicle is the root of your issue. After determining the root cause, correct or change the damaged components.
What happens if the start button is not functional?
- You’re not depressing the brake pedal all the way. As you push the Start button, make sure your foot is firmly on the brake pedal.
- The battery in your Smart Key is low or dead. Try pressing while holding your Smart Key near to the Start button. You may need to replace the Smart Key battery if this doesn’t work. Your Owner’s Manual contains directions for doing this.
- The car’s engine battery is underpowered. You must go to your nearby Toyota Service Center for a diagnosis and perhaps a new battery if this is the case.
- Unintentionally, the Smart Key deactivation switch was engaged. A deactivation switch, which is situated at the bottom of the instrument panel on the dashboard just beneath the steering wheel, might be available in your Toyota vehicle.