By following these easy instructions, you can start your Toyota Highlander remotely:
- Your Highlander’s key fob has a LOCK button. Press and hold it twice in the space of two seconds.
- Then, on the key fob, press and hold the LOCK button for three seconds.
- The engine starts, and the turn signal lights flash repeatedly.
- The engine will operate remotely for ten minutes before automatically shutting off.
If you open any door on your Highlander while the engine is running after remote start, the engine will shut off for safety reasons. To turn the ignition on and start your car, a working key must be present within the vehicle.
In This Article...
How do I start my 2018 Toyota Highlander remotely?
Push the “lock button on the keyless entry fob three times quickly in order to start the engine: (1) push and release “lock button, (2) push and release “lock button again, and (3) push and hold “lock button for three seconds.
How do I use my key to remotely start my Toyota Highlander 2021?
Press the lock button on your key fob three times to remotely start your Toyota. For the first two presses, make sure you push the lock button quickly, and for the third press, hold the button down for around three seconds.
How do I start my 2019 Toyota Highlander remotely?
For those who adore remote starting, there is some wonderful news: On the 2019 Toyota Highlander, it is standard. The key fob includes a remote start as standard.
Interestingly, there isn’t a specific remote start button on the key fob, so if you’ve been looking without success, don’t worry. Instead, to activate remote start, push the lock button three times, holding each time for three seconds.
To understand how the remote start for the 2019 Toyota Highlander functions, watch the video below. To sum up the movie:
- Wait five to ten seconds.
- The car ought to start.
- Triple-lock your doors.
Keep in mind to place your heating or cooling system where you want it to be so that when it starts up, it will immediately begin to operate. Don’t be concerned; it will switch off as you get into the car. Keep your keys nearby as this is a push-button car, and then press the button to start your Highlander.
Can you remote start the 2018 Toyota Highlander XLE?
YES! A remote starter can be installed by the user. Do not pay extravagant dealer fees to have the dealer perform services that you can perform yourself. YOU were considered during the design of the Start-Xkit. You, the typical car owner who is capable of performing a few simple repairs.
The T-harness that is included makes installation a lot easier. Wires don’t need to be cut or joined. Plug and play only.
By hitting lock three times on the factory remote, which is included in the base package, you can remote start your vehicle without carrying a separate remote. The distance at which you can lock your car is the same as the range at which you can remote start it.
You can add a long-range RF kit as an option for even longer range. If you really want to go all out, you can select a cell phone module that enables you to begin from almost anywhere that has phone service. The RF kits provide you a second remote that can operate at a considerably greater distance.
Kit contains:
- Snap ties
- Module for Remote Starting
- T-Harness
- pry bar
- Installation guidelines
Please be aware that opening the door will cause the car to stop. There is no way to get around this security measure.
Without the key fob, how do you start a Toyota Highlander?
I’m sorry to hear that the key gave you trouble. Your Toyota Highlander key fob most likely has a dead battery. But don’t worry! I’m glad to assist you.
Just follow these steps to start a Toyota Highlander without a key:
- You can enter the car by physically opening the doors with the physical key.
- At this point, you might have noticed that the car lacks an ignition key slot.
- The physical key will come out when you press the button firmly.
- On the side of the key fob, look for a push button.
- However, the car will start without any problems if you take the key fob and put it right on the push-button start as you press it in.
When you can, visit a store and purchase a CR2032 battery, which is what practically every key fob, including those for Toyotas, uses.
Did you know that you can save about $900 annually on auto insurance by installing the Jerry app for free in the time it takes to get back into your car?
Jerry assists you in comparing rates from more than 50 leading suppliers in minutes as a licensed broker. Jerry can assist you with purchasing new coverage and even canceling your existing policy when you discover a lower rate for your Toyota Highlander.
Do all key fobs have an automatic start feature?
If you spot a button with a clockwise-moving circular arrow, you’ll know it’s there. That is the remote engine start button, though the key fob itself does not have a label for it. For those who are already familiar with this button’s use, it involves hitting the lock button first, then the remote engine start button. No problem, isn’t it? Other key fobs include a button in the same location, but they have a different sequence for remotely starting the engine. The circular arrow emblem on Ford key fobs, for instance, reads “2xother fobs are labeled “X2, which means the samepositioned inside the circle. This informs you that in order to remotely start the car’s engine, you must click the button twice. This button is frequently seen in many key fobs, therefore it’s not really thought of as a hidden feature. However, other car manufacturersmost notably BMWuse modern key fobs without the button. However, this does not imply that these key fobs lack these functionalities merely because there isn’t a circular arrow button to click. By rapidly pressing the “lock button on the key fob, one can remotely start an engine in a modern BMW by doing so. You don’t need to become daring and try out this sequence to test if the engine activates after pushing the lock button three times in a single second if your key fob has the circular arrow button. However, if it doesn’t, it won’t harm to try it out and see if it manages to complete the task in some way.
Has Toyota Smart Key remote starting capability?
The Smart Key fob in your car can be used to start and stop your engine with Toyota’s remote start system. In order to ensure that your car’s interior is at the perfect temperature when you get in and drive to your next location, this feature also lets you turn on the air conditioner, heater, and defroster.
Does the Toyota remote Connect need a fee?
On all new Toyotas, depending on the model, buyers receive a free trial of Toyota Remote Connect that lasts somewhere between three and ten years. The service has an after-trial price of either $8 per month or $80 per year. Other features of Toyota Remote Connect make the cost of purchasing it worthwhile.
Is remote connect a feature on all Toyotas?
Entune, Toyota’s proprietary high-tech multimedia system, is standard equipment in every Toyota vehicle. Remote Connect is one of this system’s incredibly useful components. With Remote Connect, you may start your car’s engine and lock your car remotely, as the name of the feature says.
Without a key fob, how can I tell if my car has remote starting?
If your car has a remote starter, the owner’s manual will have information about your unique remote starter and how it functions. To see if this feature is present, look in the manual’s index.
Listed below are few well-known automobiles with a factory remote start option:
- Navara Altima
- Honda Accord
- Tribeca, Legacy, and Outback Subaru models (2007later)
- Accord, Civic, and Insight from Honda
- GM automobiles (2003later)
- Fusion and the Ford Mustang
- ZDX and TLX Acura (2010later)
- Corvette Camaro
Check your vehicle’s key fob
If your car has a remote starting, the key fob will include a specific button. Typically, an arrow forming a portion of a circle serves as the remote start symbol, as seen above. But be aware that some automakers may use a different symbol for remote starting.
What functions does Toyota remote Connect have?
A sim card is implanted inside each Toyota vehicle equipped with Remote Connect access, enabling online access to the vehicle at any time. You can utilize the service as long as your phone and the car are both in an area with a cellular signal.
Without a key, how do you start a Toyota?
It requires bypassing the ignition lock in order to start without a key, which should only be done when you’ve lost your key. The starter cord must first touch the connector before touching the ignition cord to the battery cord.
What occurs if my smart key malfunctions?
Insert the new battery after removing the old one. Your Smart Key will work once you put the key fob back together and insert the metal key.