It’s against the law to steal gas from someone else’s car. Your gas tank may have been drained by a thief if it suddenly becomes empty. Your car should be equipped with a lockable gas cap to prevent this from happening. You might want to think about upgrading to a newer automobile with an anti-siphon or rollover valve since, while gas can still be siphoned from modern cars, it is more difficult. You should dial 911 if you see any strange activity around your automobile or other parked autos.
In This Article...
How do I get around an anti-siphon system?
Gas can only enter the tank in one way thanks to car rollover valves. The two common types of rollover valves are ball and butterfly valves.
The rollover valve can theoretically be bypassed with the correct equipment. However, doing this in reality takes a lot of time and effort. I’d advise skipping this procedure and moving straight to #4 or #5 if the vehicle has a rollover valve.
Getting around the rollover valve
- Enter the fuel tank with the hose.
- The pipe is so little that it will take around five minutes of active squeezing to siphon a gallon of petrol.
- The 1/4 inch hose’s end should be connected to a thicker hose.
- To produce a thin end, cut the hose end at an angle.
- Connect your bulb siphon pump to the thicker hose.
- 8 feet of 1/4 inch polyethylene hose are required. It should be rigid while remaining flexible.
- When you press the rollover valve, twist and squeeze the handle. By doing this, the hose should pass the valve and enter the fuel tank.
Once more, this approach is much trickier than it appears, especially since there is no way to verify that the hose is successfully passing the valve.
I advise acquiring a spare rollover valve and giving it a go if you’re really interested. The ability to observe what you’re doing will help you determine the proper motions to insert the hose into the valve.
How can I drain my truck’s petrol tank?
One of the most potent resources available is gasoline. You can run vehicles, operate equipment, and power generators with a source of fuel. It may be used to run camping stoves, light fires in the windiest, wettest conditions imaginable, and even remove oil stains. There’s a reason why the majority of post-apocalyptic films and television series open with shots of people rushing to fill up at the gas station, despite all of its advantages. What do you do if you can’t get to the petrol station, is the question.
A crucial skill for any situation requiring the transfer of liquids from one container to another is the ability to siphon fuel. Siphoning starts the flow of water from a higher point to a lower place by producing a vacuum. Consequently, whether you find yourself trying to keep your RV running in the middle of a zombie apocalypse or siphoning fuel out of your tank to help someone who has run out of gas in the wilderness, here’s how to do it. All you want is a container for siphoning into and a length of tubing long enough to go from the gas tank of the automobile to your container.
3. Suck on the hose’s end like a straw, and wait for the fuel to start pouring toward your mouth if the hose is clear.
4: As soon as fuel enters your mouth, transfer the hose end from your mouth to the container.
5: Immediately spit out any fuel that may still be in your mouth and rinse with fresh water.
Like this picture-filled manual? The Illustrated Art of Manliness is a book you’ll adore if that describes you. Get a copy from Amazon.
On the fuel tank, where is the anti-siphon valve?
The tool employed for this function is known as an anti siphon valve. The block valve, which is situated directly outside the tank shell, is placed downstream from this valve in the tank’s discharge pipe.
An anti-siphon gadget is what?
For instances where a hose might be left dangling from a faucet, such as outdoor garden spigots, a faucet in a laundry room, or scenarios where the faucet or hose is below the flood level rim of the fixture, there are some anti-siphon devices available. Due to the faucet spout’s location a safe distance from any drain water, the majority of other applications do not require it. The purpose of these anti-siphon devices is to prevent the flow of potentially polluted water back into the potable (drinkable) water supply. They function as one-way valves.
Code stipulates that certain plumbing components, such as utility sink faucets and outside sill-cocks, must have anti-siphoning features.
Can stealing petrol harm your vehicle?
When I originally started looking into it, all I could see was a tank of gas being stolen, but it soon became clear that there was more at stake.
All around the nation, gas crimes are occurring. Thieves have realized that siphoning gas is time-effective. One automotive man is hearing a lot about it, despite the fact that a spot check of the nearby police agencies only uncovered a few reports.
As fuel prices climb, “Bear” Matoza, owner of the Danville Automotive and Hardware store, said, “We notice an increase in fuel theft in Danville and throughout the entire Contra Costa area.”
Customers visit the shop to purchase locking gas caps. Sales have increased by double. Locking caps safeguard the car as well as the fuel because siphoning can do serious harm.
“You can’t pull the hose out, which causes damage to a car when it enters the gasoline tank. A one-way valve is present. Consequently, after pushing it in, you must now call a mechanic to remove the hose “Matoza stated.
Because the outside of the automobile might potentially be damaged in addition as the inside of the gas tank, body shops are seeing an increase in business.
Kai Kuusik from San Francisco said, “I live in the city, so I was walking to my car, put my laptop in the trunk, and that’s when I realized that someone was trying to break in.
Kuusik’s car has a gas cap door that won’t stay shut, and the burglar’s entryway has been dented.
Kuusik remarked, “I just seen the estimate, and it’s $1,600, which is even more dismal.”
Even though it’s a large sum of money for such a minor amount of theft, Alex Astts of Autobahn Collision Center says there is still much work to be done.
When questioned if consumers would be surprised to hear a large repair cost, Astts responded, “And they become irate. They believe I’m out to scam them, but the estimate is genuinely based on the car’s damage. The estimate was not written by me. Actually, it is the harm that was brought on by that individual.”
Astts claims that while he has only seen a few automobiles damaged by siphoning thus far, he expects to see more in the future as gas prices rise, which gets us back to prevention.
“We will switch to these locking gas caps as things become worse. Once you secure this gas cap, they are unable to remove it because the bottom spins freely “Matoza stated.
A locking gas cap can cost as low as $15 or as much as $50, depending on the vehicle.
How can gas tanks without caps function?
When you remove the gasoline pump nozzle, a spring-loaded closure inside your capless fuel system locks up your tank. The gas is kept securely within your car in this way. Fuel and vapors cannot escape thanks to the O-ring-style seal on that spring-loaded mini-cap. You risk damaging the capless fuel system if you run out of fuel and use a portable fuel can to refuel.
Your portable plastic gas container’s flexible corrugated gasoline spout may create issues inside the fuel filler area. Before adding emergency fuel, you must first insert a special funnel that is supplied by manufacturers like Honda and Ford into the fuel filler area. If you don’t utilize the specific tool, you can get a check engine light and need to see your dealer to have the system fixed.
How to Find Your Vehicle’s Fuel Filler Funnel
The 2019 FIAT 500X’s clever under-floor cargo space places the capless fuel funnel in full view. This is rather standard. The tools for the spare tire are typically kept close to or with the vehicle’s capless gasoline funnels.
However, not all models are as simple. In some, the unique tool is concealed beneath an arbitrary panel. Check your owner’s manual to find the special tool if your car has a capless gasoline system. We advise using an online manual and just typing “Capless Fuel” into the Control-F search box to find it. Alternatively, look under “Tools” or “Refueling” in your printed manual. Try simply Google the year and model name of your vehicle followed by “Capless Fuel Filler” if you still can’t locate what you’re looking for, and then go to the automaker’s website that explains where to find it.
Locate the capless gasoline filler tool and make sure yours is where it should be once you have the necessary information. The other people who use your car should be shown where it is so they are aware of its whereabouts.
A car should never run out of fuel. It can be a little more of an issue with capless gasoline systems if you mistakenly insert the incorrect kind of gas can nozzle. Get ready. For more insightful advice, follow us on Facebook and Twitter!
How much trouble can siphoning gas get you in?
Anyone accused of siphoning gas from a parked automobile would be charged with theft by unlawful taking, a Class A misdemeanor that carries a maximum sentence of one year in county jail and a fine of $2,000, according to Dirsa.
How can gas from an automobile be stolen?
According to AAA, older automobiles include a valve that stops gas from spilling in the event of an accident, making it impossible to remove gas from the tank without first drilling a hole in it. The valve also hinders the traditional siphoning of gas from a tank.
Can you steal gas from modern vehicles?
Without using any mechanical mechanisms, how can you transfer gasoline from a car’s gas tank to a gas can? Gravity, liquid cohesion, and air pressure are the key factors.
The procedure entails connecting one end of a hose into the gas tank and the other end into a gas can that is set lower than the gas tank. The standing liquid will eventually be forced into the hose by the tank’s air pressure, where it will eventually flow to the other end and form a continuous flow. Due to suction and the cohesiveness of liquids, the gas will keep flowing. Using a pump to immediately create suction on the hose’s departing end will expedite the operation and cause the gas to flow more quickly.
Modern automobiles include rollover valves that relieve tank pressure, stop backflow, and also stop gas siphoning, making conventional siphoning techniques and equipment ineffective or even harmful. The theory still holds true even though you’ll need a modern pump and line with a very small diameter to siphon gas from more recent vehicles.