Tire Pressure Monitoring System (TPMS) informs drivers if the tire pressure in any of the tires changes in late-model Toyota Tacoma pickup trucks. Although this is a helpful safety feature, there are some circumstances that could lead to the low-pressure indicator light turning on when it shouldn’t, such as when moving large weights or rotating tires. Restart the system if this happens.
In This Article...
Step 3
The TPMS reset button is next to and to the left of the steering wheel. Press and hold it. The word “Set” is written beneath the button. Be on the lookout for the dashboard’s speedometer display’s blinking TPMS warning light. Release the button after three blinks.
Step 4
Watch for the TPMS warning light after the car has been restarted. If it restarts, blinks briefly, and then stays lit, there is a systemic issue that has to be looked at by a technician. The TPMS system has been successfully reset if the light doesn’t turn back on.
- tire pressure gauge
- air tube
On a Toyota Tacoma 2020, how do you reset the tire pressure light?
Resetting the Tire Pressure Light on a Toyota Turn the key to the “On position when the car is off, but don’t let it run. When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the car and let it run for 20 minutes to let the sensor reset.
On a 2017 Toyota Tacoma, how do you reset the tire pressure light?
Turn the key to the “on” position with the car off, but don’t let it run. When the Toyota tire pressure sensor blinks three times, hold down the TPMS reset button until it stops blinking. Start the car, then let it run for 20 minutes to let the sensor reset.
Where is the button to reset my TPMS?
Tire pressure monitoring system is referred to as TPMS. The TPMS reset button is often located below the steering wheel. Your car’s TPMS needs to be electronically reset after you replace the tires in order to erase the error message. Hold the TPMS reset button down until the tire pressure light blinks three times, then let go of the button to complete the process. Your car should be started, and the sensor will refresh after 20 minutes.
How can I turn off the tire pressure warning light?
When the tire pressure light blinks three times, release pressure on the TPMS reset button. For the sensors to reset, start the car and let it run for 20 minutes. Under the steering wheel is where you’ll find the reset button for the tire pressure monitor.
Why are my tires fine but my TPMS light is on?
It’s likely that one or more of your tires have low air pressure if you see the tire pressure indicator turn on. However, even if your tires are in good condition, there are a number of things that could cause the sensors to go off, so you shouldn’t rely only on the data from the tire pressure monitoring system of your car.
We’ve talked about some additional aspects of automobile maintenance in this piece. Read these articles if you have some time:
Why, after filling the tires, is the tire pressure light still on?
If you’ve inflated your tires, but the air pressure warning light continues to flash, your tire pressure monitoring system is malfunctioning or you have a gradual leak. A bright TPMS warning light indicates a problem with a tire pressure sensor, assuming there isn’t a leak in your tire. One of them might be damaged, the lithium-ion battery might be dead, or the TPMS itself might have an internal problem. You’ll need to get your Tire Pressure Monitoring System repaired in any of these scenarios.
Quick Tip: Recheck the tire to ensure it is inflated to the correct air pressure if the TPMS warning light illuminates again after you have inflated it. Low tire pressure indicates an air leak, which requires repair or tire replacement.
My tires are in good condition, so why is my low tire pressure sign on?
Typically, a tire with an air pressure that is 10% to 15% low will turn on the warning light. The air pressure inside the tires also tends to drop in cold or icy conditions. Short trips in the car will warm up the tires and raise the pressure in them.
How can the TPMS on a 2018 Tacoma be reset?
Turn the key to the “ON position with the engine off but do not start the car. Hold down the TPMS reset button until the tire pressure warning light flashes three times. Release the reset button after that. Start the car, then wait for the sensor to refresh for around 20 minutes.
Should the TPMS be reset after purchasing new tires?
After changing or rotating your tires, or after adding new sensors, you should always reset your TPMS. Even after you have inflated your tires, some sensor manufacturers advise restarting the device. By teaching the primary TPMS system to identify the sensors in their new locations, resetting the TPMS is frequently referred to as retraining the system. TPMS reset procedures vary from vehicle to vehicle and typically involve a specific sequence of ignition and pedal actions, a configuration change in your dashboard menu, or the use of a TPMS Reset Tool.
Driving with the TPMS light on is it safe?
There are several possible meanings when you see that silly little light with the exclamation point glaring back at you. It’s frequently anything as harmless as temperature changes that result in a change in the tire’s air pressure. In more severe situations, a puncture or other damage has caused the tire to lose pressure. The sensor can also be activated and result in the light coming on if your tires are overinflated.
Is It Safe To Drive With TPMS Light On?
To avoid seeming like Debbie Downer, we’ll simply say no. Driving around with your TPMS light on is not safe. You can’t tell how quickly your tire is losing air or how long it has been over- or underinflated without doing a tire examination. The best course of action is to check the current inflation level of each tire with a tire pressure gauge.
When the tire inspection light appears while you are driving, slow down and get to the closest gas station or service facility.
Will the tire pressure light automatically turn off?
After a few kilometers of driving, the light may turn off if the tires are adequately inflated. After around 10 miles, if the light still remains on, it may be necessary to reset the TPMS as instructed in the owner’s handbook of the car.
In what location is the TPMS sensor?
In the US, direct TPMS usage is more prevalent. The sensors are either housed in the tire pressure valve, which also serves as an antenna, or they are band-clamped to the wheel rim. These gadgets deliver the data to an on-board computer.
My low tire light won’t turn off; why?
If your tires are properly inflated yet the warning light continues to illuminate, you may have a leak or a TPMS issue in one or more of your tires. To determine if a tire has a leak is not difficult. Simply double-check the air pressure in each of your tires with your tire gauge. If all of the tires have the proper air pressure, one or more tire pressure sensors are likely to be at fault, necessitating repair work on your tire pressure monitoring system. You’ll need to replace or repair the tire if you notice that one or more of your tires’ air pressures have fallen.
How soon does the tire pressure warning light turn on?
Even when the tires are in good shape, the low tire pressure light may occasionally remain on. In such circumstances, you should manually check the tire pressure to make sure there is no issue. People frequently witness this light in the coldest part of the day, the morning. However, the light occasionally turns off when the temperature rises. In any case, until the air warms up and expands, your tires may still be a few PSI under-inflated in cool weather.
A defective tire pressure sensor often exhibits three symptoms. When you discover that your tires are flat but the sensor didn’t alert you, it is the first scenario. The second sign that anything is wrong with the sensors is when your ECU turns on the TPMS light on your dashboard. When the sensor suggests that you have a flat tire when you are aware that you don’t, it is the third indication of an inaccurate alert.
After a few kilometers of driving with properly inflated tires, the sensor light typically turns off. However, you should reset the TPMS in accordance with the directions in the owner’s manual if it doesn’t turn off automatically after traveling for around 10 miles.
In 2008, the U.S. Department of Transportation mandated that tire pressure monitoring systems be installed in all automobiles (TPMS). As a result, even if you can reset it, the TPMS in your car cannot be turned off.
Technically, driving with the TPMS light on is possible, but it is not recommended. The sensor alert indicates either an under- or over-inflated tire. Ignoring this warning could result in excessive tire wear or possibly a blowout, all of which could be dangerous for you and other road users.
Does Costco fix TPMS units?
You receive a number of significant benefits when you buy tires from Costco Wholesale, whether online or at one of our nearby warehouse locations. All shipping and handling fees for your tires are already included in our advertised retail prices.
Additionally included in the installation package are lifetime maintenance services, which last for the duration that you own the tires (some limits may apply). These Lifetime services include flat repairs, tire rotations, tire balancing, and inflation pressure checks.
We replace your old rubber valve stems when we service your tires (Note: TPMS valve stems and accessories will be an additional charge). Additionally, rather than compressed air, we use nitrogen to inflate your tires. Tire pressure is better maintained over time by nitrogen than by compressed air, which can extend tire life and improve fuel efficiency.
Finally, all of our tires are covered by the Costco Road Hazard Warranty for your safety.
What does my glove box’s Set button do?
TPMS relearn procedures can be simple to handle if you have the correct equipment and experience. Tire pressure reading failure and TPMS system failure can both occur if a TPMS retrain procedure is not completed.
According to consumer phone calls and letters to tech support, the Toyota and Lexus OBD relearn procedure is the most challenging relearn process. To execute an OBD relearn, a sophisticated TPMS diagnostic scan tool, such as the VT56 and VT55, is necessary.
Even when the procedures are correctly carried out, the relearn operation occasionally fails because of the “The SET button can be found in some Toyota models in the glove box or beneath the steering wheel.
The system searches for the already-stored sensor IDs when the button is pressed. The “When changing or altering tire pressure, changing tire size, rotating tires with different tire pressures in the front and back, or replacing tires, the SET button can be used.
The OBD must be relearned, though, when a sensor is changed or new wheels are added. The new sensor ID numbers will be programmed into the vehicle’s ECU via the OBD-II module connection. The relearn procedure can then be carried out.
If the “The ECU must be unlocked in order for the relearn operation to be successful when the SET button is pressed.
The service TPMS menu on a sophisticated TPMS scan tool, such the VT56, offers a “UNLOCK ECU button that can be used to switch the button “OFF. When finished, the “By using the relearn procedure stages that are described in the tool’s UNLOCK ECU option, the relearn operation can be carried out correctly.