You must replace the oil and use synthetic SAE 0W-20 if your Toyota Tacoma’s maintenance light illuminates. Here’s how to reset the maintenance light if You’ve already done that and need to. Don’t start the engine while you turn the ignition on. Make that the miles, not the trip meters, are displayed on the odometer. If so, press the trip meter reset button after turning the car back off. Hold it down and restart Your Toyota (Again, not starting the engine). If you keep holding the trip meter reset button while doing this, you should see the odometer begin to show a sequence of dashes on the screen. These will change to zeros. Release the reset button once those vanish and the regular odometer numbers appear on your screen. The maintenance button should have vanished by this time, and you shouldn’t see it again until you’ve covered another 5,000 miles.
The rest oil light shows that it’s time for an oil change. Turn the ignition to the on position without starting the engine to reset the light. Turn off the ignition, push and hold the trip odometer reset button, and then press the odometer to trip.
Your oil change reset is located on the multi-display screen in your dash. The factory recommends that Tacomas manufactured in 2016 and after have their oil changed every 5,000 miles. Your maintenance handbook and online resources contain every detail.
In This Article...
What does the 2015 Toyota Tacoma’s maintenance required light mean?
On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.
How do you turn off the maintenance light on a third-generation Toyota Tacoma?
Press and hold the trip meter reset nob (located next to your Toyota Tacoma’s odometer) to reset the light. Turn the ignition to “ON” while holding the trip meter reset knob, but do not start your Toyota Tacoma. Keep pressing the meter reset button until the MAINT REQD light goes off.
How can you turn a Toyota’s maintenance needed light back on?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
When should the oil be changed in a 2017 Toyota Tacoma?
For traditional oil, Toyota suggests changing your 2017 Toyota Tacoma’s oil and filter every 3,000 to 5,000 miles. One of the most important and expensive maintenance for your car is an oil change. Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles.
How do you repair a Toyota Tacoma’s maintenance?
The convenience of having a car-savvy family member must be incredible! Yes, you can manually reset your light as you are aware that your car is in good condition.
Turn off your vehicle, then push and hold the odometer reset button to turn off the maintenance light on a Toyota Tacoma. Odo/Trip is the typical label for this button. Hold the button down as you restart the ignition of your car.
Your maintenance light ought to be back on now! By starting your car as usual and waiting a few seconds, you can ensure that the light remains off. Visit a professional to ensure that your automobile and your sensors are in good working order if the light does indeed come back on.
Although automobile repairs might be expensive, Jerry can help you save money on other auto-related costs. Jerry is a free insurance comparison software that checks around for the best deals with more than 50 different insurance providers. You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have. Every year, the typical Jerry user saves $879.
How can the oil light on a 2005 Toyota Tacoma be reset?
- Make sure the tripmeter is lit up on the vehicle’s odometer when the ignition is in the ON position, then switch it to the OFF position.
- Press and hold the MODE or TRIP reset button.
- Switch the ignition to the ON position while holding the reset button.
**To activate the Key On/Engine Off mode using the Engine Start/Stop button, depress the button twice while keeping your foot off the brake pedal.
- Hold the reset button down until the odometer shows “000000 is shown before the initial value.
- Ensure the reset was acknowledged by turning the vehicle on and off again.
- Make that the odometer is shown with the ignition switch in the ON position, then switch it to the OFF position.
- Hold the reset button down until the odometer shows “the MAINT REQD light flashes, or 000000
These reset instructions should be useful to you, we hope. With our mobile app Oil Reset Pro, which is available in the Apple and Google Play stores, you can always have this method at your fingertips along with the rest of the domestic, Asian, and European manual maintenance reset procedures. To get a free download from the shop right away, click the links below.
On a 2005 Toyota Tacoma, how do you turn off the check engine light?
response given by
- Step 1 is to raise the hood.
- Disconnect the negative battery terminal in step two.
- Step 3: To clear the computer’s memory, depress the brake pedal for roughly a minute.
- Step 4: Start your car after reconnecting the negative battery terminal.
- HOWEVER: What does the check engine light actually mean?