Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for another 10 seconds or so. You can hear a beeping noise in addition to the maintenance light beginning to flash. The light ought should thereafter go out.
In This Article...
How can I turn off the Toyota maintenance is required light?
Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
How can my Toyota maintenance be reset?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
How is the oil change reminder reset?
- Don’t start the engine; instead, turn the ignition to the ON position to turn on your gauges and electronics.
- Look around the dashboard and gauges of your car for a button, switch, or stick that says “Reset.”
Hold the Reset Button and Turn the Key
- To reset, press and hold the button.
- Holding down the reset button, turn the ignition back to the ON position.
- Release the reset button after a brief period of the light blinking ON and OFF, and then turn the ignition OFF.
- Keep a close eye on the maintenance or oil change light. It ought to begin to flicker.
Start the Vehicle
- For more details on the procedure for your vehicle, consult your owner’s manual or the website of the automobile manufacturer if the dashboard light is still ON after two attempts.
- Check that the maintenance or oil change light is currently off before starting the engine.
- Repeat the reset process if it’s still on.
How frequently should a 2016 Toyota Highlander have its oil changed?
For traditional oil, Toyota suggests changing your 2016 Toyota Highlander’s oil and filter every 3,000 to 5,000 miles. Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles. Remember that the best way to determine the optimal intervals for your vehicle is to consult the owner’s manual and your dealer.
Why does the maintenance light not go out?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
Why does my maintenance light come on after I change the oil?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.