Toyota Highlander Maintenance Light Reset Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for another 10 seconds or so. You can hear a beeping noise in addition to the maintenance light beginning to flash. The light ought should thereafter go out.
In This Article...
How can I reset the dashboard on my Toyota?
Instructions for Toyota Camry to reset maintenance light
- Switch to position one after inserting your key into the ignition.
- Turn the key to position two while pressing and holding the odometer button on the dashboard.
- When the maintenance light begins to flash, keep holding the odometer button.
- Pull back on the odometer button, then turn the key.
How can my Toyota maintenance be reset?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
What does the triangle in a Toyota Highlander with the exclamation point mean?
Have you ever been operating your Toyota Highlander when a symbol suddenly appeared on the dashboard? If so, then every sign has a unique meaning. Everybody occasionally gets a visit from a dashboard light.
While some lights are only indicators, others are alarms indicating your Highlander requires regular upkeep or repairs. It’s crucial to understand what each dashboard light on your vehicle indicates.
An indication light is any light that appears on the Toyota Highlander’s dashboard and is either blue or green. A light that alerts you that anything in your car is on is what an indicator light does exactly as it sounds. The majority of the time, it indicates on your dashboard whether a Highlander feature has been activated or canceled.
Some of the typical warning lights that you might see are listed below:
- Turn Signal Indicator: These green lights signify that the Highlander’s right or left turn signal has been engaged.
- The VSC/TRAC OFF Indicator shows whether the traction control or vehicle stability control systems are activated or off. To turn off the light, push and hold the switch while the car is still moving.
- TRAC OFF Indicator: This light appears to alert you to the need to turn off the vehicle’s traction control and/or stability control systems.
- An icon resembling a speedometer serves as a visual cue that the cruise control system is engaged.
- An emblem in the shape of a key will display on your Toyota Highlander’s dashboard to let you know that the security system is operating as intended.
- Headlight High Beam Indicator: This blue light signifies the active state of the headlight high beams.
Your Toyota Highlander will have a warning light if it has a yellow or red light. A warning light is typically an issue that needs to be resolved right away in order to keep your SUV in the finest condition possible. If you notice any of the lights listed below, get in touch with our service staff to arrange a visit:
- When an icon resembling an old-fashioned oil can appears, it means your oil pressure is too low and should be checked. Low Engine Oil Pressure Warning Light: You should take immediate action to address this problem in order to prevent potential engine damage.
- Electric Power Steering (EPS) Warning Light: It’s critical to have your Highlander evaluated if this warning light, which looks like a steering wheel next to an exclamation point, comes on your dashboard.
- Master Warning Light: When the master warning system detects a problem, a triangle with an exclamation point inside of it shows on the dashboard and a buzzer sounds.
What does the Toyota Highlander’s exclamation point mean?
- Parking Brake Warning: If your parking brake is engaged when you turn on your car, this light will come on so you may release the brake before setting off on your trip. This light seems to be “ON YOUR DASHBOARD, PARK
- Electric Power Steering Warning: If you notice an exclamation point next to a steering-wheel icon, your power steering isn’t working properly. Turn off the car and move it to a safe location. If the light is still on after starting your car again, don’t continue traveling and contact your local Toyota dealer right away.
- Your tire is low on air if you notice the symbol of a horseshoe with an exclamation point in the center of it, which is the tire pressure warning light. To get your tire’s PSI to the right level, you should stop at the closest gas station and use the air pump.
- As soon as you notice this light, which merely states “Brake System Warning,” “The signal BRAKE indicates a problem with your braking system. Turn off the car and stop it in a safe place. Make an instant call to your local Toyota dealer if the light doesn’t go out.
On a Toyota Highlander, how do you turn off the check engine light?
If the problem or code that caused your Toyota Highlander’s check engine light to come on is resolved, it will typically turn off by itself. For instance, if a loose gas cap was the reason your check engine light came on, the light will automatically switch off once the gas cap is tightened.
Why does my Toyota state it needs maintenance?
- Press and hold the ODO reset / readout button while the engine is off.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- The ODO display will briefly flash before beginning to display only zeros.
- If the car is on, turn it off.
- Now the light will read “MAINT REQD.”
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
How long must the automobile battery be disconnected before the computer can be reset?
Yes, one way to reset the check engine light is to disconnect the engine. The majority of sources advise leaving the battery disconnected for at least 15 minutes to ensure the computer forgets the code before you reconnect the battery because some of the electrical current is kept in the computer for some time afterward.
Other experts advise draining any remaining electricity on the computer after removing the engine by turning on the light switch for a few minutes (the lights won’t turn on).
Before you take this approach, keep in mind that there are certain drawbacks to this way of turning off your check engine light. If your car was made after 1996 and you have access to one of these tools, such as this one available on Amazon, you can also use it to reset the fault codes if you’d prefer not to deal with those.
It’s never too late to start learning how to properly take care of and maintain your car. We value the time you invested in learning how to properly disconnect your battery. For whatever reason you need to disconnect it, be sure to hire a pro to ensure your safety and the safety of your belongings.
How can I restart my instrument panel?
The Sel/reset button should be repeatedly pushed and released three times. The instrument cluster starts its internal evaluation. Every time the Sel/reset button is pressed again, all the gauges cycle through once more. If the vehicle speed exceeds 1.5 mph, turn the ignition switch to OFF to end the sentence.