Turn your phone totally off for 30 seconds, then on again to reset it. Make sure you are truly turning off your phone as opposed to simply restarting it. Press and hold the audio knob to turn off the system, and Entune will shut down and resume on its own. This will reset the Entune System.
In This Article...
Soft Reset
The Toyota Entune multimedia system can be quickly and easily reset using the following technique:
- Put your key in the ignition lock and turn it to the “On” position, or start the engine by pressing the Engine button twice.
- Hold off till the multimedia screen turns on.
- For 12 seconds, firmly press and hold the PWR-VOL knob.
- Toyota Entune ought should restart and work normally.
Before moving on to more advanced techniques that will also remove part of your data, it is usually worthwhile to try this method first, even though it doesn’t always succeed. Alternately, attempt these:
- While the engine is off, turn on the electrical systems.
- Hold off till the Entune system turns on.
- Take your phone, then un-sync Toyota with all of your other Bluetooth devices.
- Go to Bluetooth connections on the Entune screen and take your phone out of the list of recognized devices.
Hard Reset
If the prior approach didn’t work, you must carry out the following actions:
- Do not start the engine; instead, press the Engine button twice.
- The multimedia system’s physical Apps button should be pressed and held. Turn the lights on and off three times without letting go. On the screen will come a selection called Diagnosis Check.
- The screen’s INIT button should be pressed and held. You will receive a “Personal data is initialized” notification. OK? which will elicit a “Yes” from you.
- Check to see whether all Bluetooth connections, radio stations, and phone calls have been disconnected before starting the engine.
The most effective way to guarantee a long-term, bug-free operation is to use this procedure, which wipes out all of the saved data and effectively returns Entune to factory default condition.
Software Reset
Using software commands solely is an alternative to the hard reset technique. Additionally, this may delete your data, so proceed with caution and back up any crucial information.
- Without starting the engine, start the vehicle.
- Remove Entune from any Bluetooth devices that are currently in use.
- Similar to the first way, press and hold the PWR-VOL button for roughly 12 seconds.
- Select the Setup menu on the display after the restart is finished.
- Choose General from the menu.
- Locate and click the Delete Personal Data button.
- Check that everything is working properly by starting the car.
How can I restart my car’s Bluetooth?
The best approach to accomplish this is to turn off Bluetooth on both your smartphone and your car. Remove your smartphone from the infotainment system in your car, along with any history of connected devices. After that, turn off the car and restart your phone while still in it.
Why is my Bluetooth no longer able to connect to my Toyota?
The Bluetooth setting in the car might not be on. Go to the menu, setup, Bluetooth, detailed options, and make sure Bluetooth power is on to check this feature. Ensure that Bluetooth is enabled on your phone. You may do this in the settings of your phone.
How do I get my Toyota Connect to work again?
Step 1: Click the wheel icon on the home page. Click “Settings” in Step 2. Step 3: Select “Car.” Click “Activate associated services” in Step 4.
Unable to connect to the Toyota app?
There are dozens of earlier talks, most of which are about ’20s; ’19s function great generally; there is also a TSB in the 4.5 TSB forum on the issue. To find these discussions, use the advanced search feature. For the Toyota app, the fundamental first step is to remove the app and start over. If it has never connected, you might need to call Toyota Customer Service to get it operating; alternatively, you might be able to use the SOS system. Many ’20 owners who are frustrated wish you luck.
How can I pair my Toyota with my Bluetooth device?
It’s really simple to connect your device over Bluetooth once you know how. Decide between an Android or an iPhone, then follow those instructions. Keep in mind that in order to use phone apps in your Toyota vehicle, you must first register a Toyota EntuneTM account.
Android Directions
Using Android:
- Choose “Settings”
- Activate “Scan for devices.”
- Activate Bluetooth.
- Input “SETUP”
- To make this system discoverable, click.
- Choose “Add New Device”
- Choose “Bluetooth”
Select “Android car multimedia is available. Accept the phone’s pairing request and press “Accept on the touchscreen of your Toyota. Toyota and your phone are now connected!
iPhone Directions
Using an iPhone
On your iPhone, tap “Car Multimedia,” then tap “Pair. Press “Accept” once more on your Toyota touchscreen. Toyota and your iPhone are now connected.
EntuneTM App Suite and Hands-Free Bluetooth
You’ll need a USB cord to use your phone’s apps with your Toyota. The prior Bluetooth configuration was made exclusively for hands-free EntuneTM use. It makes your EntuneTM capable of voice commands so you can keep your eyes and attention where it’s most needed: on the road.
Need to Order Some Stuff for Your Toyota?
Visit our Parts and Accessories page to see everything we have available for your vehicle. Check out our service deals while you’re there to ensure you’re receiving the greatest bargain.
How can I update the Bluetooth on my Toyota?
Receive the most recent Toyota EntuneTM updates:
- Open the EntuneTM app, then establish a Bluetooth or USB connection with your car.
- You will be given the option to update “NOW” or “LATER” in a menu that will display on the screen.
- By choosing now, all of your updates will be handled instantly and automatically.
Why does my 4Runner’s Bluetooth not function?
The radio unit of some 4Runner owners has had problems where it gets stuck in a reboot cycle. The main source of this problem is a Bluetooth connection. It can be fixed by disconnecting and restarting the Bluetooth connection, updating the system in the car, or changing the head unit entirely.
The head unit on the Toyota 4Runner has been known to repeatedly reboot for many of its owners.
As a result, the center console’s screen will stop, go blank, and then restart with the Toyota logo.
Of course, this is frustrating and inconvenient because it prevents drivers from using the navigation system or even listening to music.
Bluetooth Disconnect
Bluetooth connectivity is the key reason why the radio reboots frequently.
This issue typically arises when the radio is Bluetooth-connected to a phone.
The first remedy is to entirely detach Bluetooth and operate the radio without it.
Deleting the Bluetooth connection on the phone and the car’s head unit can be another option if Bluetooth is something you must have.
Software Updates
Some owners returned their cars to Toyota, where they had to upgrade the computer system in their car or perform a full system reset before the issue was resolved.
Rarely, owners have been forced to spend $870 to totally repair a defective unit.
The Toyota logo has caused some owners’ radio units to totally freeze, making it impossible for them to install the update on their cars.
The vehicle would then need to be taken to Toyota, where updating the system would cost $100.
What is a Toyota Touch and Go reset?
Resetting Toyota Navigation
- Press the “Setup” button on the device’s right side after turning the navigation system “On.”
- On the touchscreen menu, select “General” from the top right corner.
- Click “Down” to choose “Delete Personal Data.”
How do I remove Bluetooth accessories from my 2019 Toyota Camry?
It can be a little annoying if your car’s memory is overflowing with objects that are not yours. Fortunately, removing Bluetooth devices from a 2019 Toyota Camry only takes a few simple steps:
- Select Devices from your Camry’s home screen to access the settings.
- Turn on Bluetooth by clicking the setting.
- Choose the device you wish to get rid of.
- By choosing Unpair, the device will be erased.
Your personal gadgets and the hands-free capabilities offered by your car’s Bluetooth connectivity will now be easier to access. Check out the Jerry app to see how much you can save on your car insurance if you’re looking for more auto-related convenience.
Jerry gets in touch with your insurance provider to learn more about your current coverage so you won’t have to climb a mountain of inquiries. Without doing any of the legwork, you receive the greatest prices and coverage. The typical user saves $879 annually.
How can I resolve a Bluetooth pairing issue?
Step 1: Review fundamentals of Bluetooth
- Restart Bluetooth after turning it off. Learn how to activate and deactivate Bluetooth.
- Verify that your gadgets are connected and linked. Discover Bluetooth pairing and connection techniques.
- Restart your electronics. Find out how to restart your Pixel or Nexus phone.
Why isn’t my car’s Bluetooth functioning?
FIX: Ensure that the contacts can sync on your smartphone. Select “Settings,” then “Bluetooth,” and then look for the car that’s having trouble pairing. As soon as you tap the I button next to the car, make sure “Sync Contacts” is ticked in every box.
What should you do if your car’s Bluetooth won’t connect?
- Turn off Bluetooth by going to Settings > Bluetooth. Turn on Bluetooth once more after waiting for roughly 5 seconds.
- For more details on how to pair with a Bluetooth device, consult the owner’s manual that came with your automobile. The majority of vehicles demand phone setup on the dashboard.
- Try renaming your device if you have many phones connected to your car stereo: Enter a new name by going to Settings > General > About > Name. Then attempt reestablishing contact.
How do I remove the Bluetooth cache?
Cache files on your Android device may be removed to resolve disconnections. To completely reset Bluetooth, clear the data cache on the phone or tablet. Both your device and your Square Reader won’t be harmed by this.
You must turn on system apps on your Android device before clearing the cache. To accomplish this on an Android device:
After selecting Show system apps, hit the Sort icon (the downward-pointing arrow with three vertical bars).
To confirm, press OK. The Square Reader and any other linked devices might need to be reconnected.
To erase your cache after turning on system apps, do the following:
You might want to search for instructions on how to clear the Bluetooth cache for your individual Android device if the methods are a little different.
Do you need some practice pairing your readers? Discover how to Bluetooth-connect your Square Reader.