Resetting the Tire Pressure Light on a Toyota Turn the key to the “On position when the car is off, but don’t let it run. When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the car and let it run for 20 minutes to let the sensor reset.
In This Article...
Where is the button to reset my TPMS?
Tire pressure monitoring system is referred to as TPMS. The TPMS reset button is often located below the steering wheel. Your car’s TPMS needs to be electronically reset after you replace the tires in order to erase the error message. Hold the TPMS reset button down until the tire pressure light blinks three times, then let go of the button to complete the process. Your car should be started, and the sensor will refresh after 20 minutes.
Why is my tire pressure light on when my Toyota Corolla’s tires are fine?
Several cars now come with a built-in tire pressure monitoring system (TPMS). An indication light will flash on your dashboard if the air pressure in your tires drops below the recommended level.
The information system in the dashboard may have a menu that shows you which of the four tires is malfunctioning. The TPMS indicator may be on in a number of circumstances, however your tires may not require replacement or upkeep.
If this occurs and all of your tires seem to be in good condition. This light may illuminate even if your tires are in good condition for a number of different reasons. The decrease in outdoor temperature is one explanation. To double-check and confirm it, it is advisable to maintain a tire pressure gauge in the automobile.
How can I make my low tire pressure warning light come on?
Turn the key to the “on” position with the car off, but don’t let it run. When the Toyota tire pressure sensor blinks three times, hold down the TPMS reset button until it stops blinking. Start the car, then let it run for 20 minutes to let the sensor reset. Under the steering wheel is typically where you’ll find the TPMS reset button.
Why, Toyota, does my tire pressure light remain on even after filling the tires?
Try the following if your TPMS light is still on after you have inflated your tires to the recommended pressure: 10 minutes at a speed of 50 mph would be plenty. When you start the car again, the TPMS light ought to be off because this ought to reset the tire sensors.
On a Toyota Corolla, where is the reset button located?
Put the maintenance light out.
Corolla, Toyota Put the Corolla’s keys in. Don’t start the car; instead, turn the key to the “On position. In order to make “Trip A” appear on the main screen, press and hold the trip reset button next to the odometer. Reset the key to “Off.”
My tires are in good condition, so why is my low tire pressure sign on?
Typically, a tire with an air pressure that is 10% to 15% low will turn on the warning light. The air pressure inside the tires also tends to drop in cold or icy conditions. Short trips in the car will warm up the tires and raise the pressure in them.
Driving with the TPMS light on is it safe?
There are several possible meanings when you see that silly little light with the exclamation point glaring back at you. It’s frequently anything as harmless as temperature changes that result in a change in the tire’s air pressure. In more severe situations, a puncture or other damage has caused the tire to lose pressure. The sensor can also be activated and result in the light coming on if your tires are overinflated.
Is It Safe To Drive With TPMS Light On?
To avoid seeming like Debbie Downer, we’ll simply say no. Driving around with your TPMS light on is not safe. You can’t tell how quickly your tire is losing air or how long it has been over- or underinflated without doing a tire examination. The best course of action is to check the current inflation level of each tire with a tire pressure gauge.
When the tire inspection light appears while you are driving, slow down and get to the closest gas station or service facility.
Should the TPMS be reset after purchasing new tires?
After changing or rotating your tires, or after adding new sensors, you should always reset your TPMS. Even after you have inflated your tires, some sensor manufacturers advise restarting the device. By teaching the primary TPMS system to identify the sensors in their new locations, resetting the TPMS is frequently referred to as retraining the system. TPMS reset procedures vary from vehicle to vehicle and typically involve a specific sequence of ignition and pedal actions, a configuration change in your dashboard menu, or the use of a TPMS Reset Tool.
Why is the pressure in my tires light still on?
When the TPMS warning light illuminates, proceed with caution. This indicates that at least one of your tires may be at least 25% under-inflated.
*The simplest way to get the most accurate reading is to check the tire pressure before you drive on it when the tire is “cool.” If your TPMS light is on, first check that you have correctly reset your TPMS by following these instructions.
Will my TPMS light automatically turn off if I fill my tires with air after it illuminates?
Several minutes after reinflating the tires to the prescribed pressure, the TPMS light ought to go out.
What happens if I adjust the tire pressure but the light on my tire pressure gauge still doesn’t go out?
The only place that can fix a computer issue that causes the TPMS warning light to turn ON and flash ON for one second and OFF for three seconds is the dealership service center. When the TPMS warning light illuminates and remains on, one or more tires may have low tire pressure. The light ought to go out once the tire is inflated to the recommended tire pressure listed on the door placard. Always check the pressure in all of your tires because one or more of them may not be at the proper pressure.
Does a flat tire cause my tire pressure light to illuminate?
The tire pressure monitoring system (TPMS) light will illuminate on the dash if you’ve had the unfortunate experience of obtaining a flat tire and have had to mount the spare tire. How come? What you must know is as follows:
The TPMS light on the dash illuminates because the spare tire cannot provide a reading because it lacks a TPMS sensor.
You should only need to travel a few miles after replacing the damaged wheel and tire with the original ones for the car to turn off (the TPMS system just needs to check the system and rest the light).
Check TPMS System will also appear on the multi-information display if your vehicle has one. After the regular wheel is put back on the automobile, this will disappear.
Does Toyota alert you to a low tire?
Tire Pressure Monitoring Systems are standard on all new Toyota vehicles (TPMS). Essentially, the system’s function is to inform drivers when a tire or tires are in need of being refilled, repaired, or replaced. Any queries customers may have about the TPMS in their Toyota car can be addressed by the service team here at Toyota Palo Alto. Come see how the Tire Pressure Monitoring System in Your Toyota Vehicle operates with our team today!
What Should You Do When the Tire Pressure Monitoring System Warning Light is Active?
In order to measure the tire pressure for each of the car’s four tires, the Tire Pressure Monitoring System in your Toyota vehicle essentially uses sensors. The TPMS Warning Light and a warning message will both illuminate on your Toyota instrument panel when one or more of your tires have too little air in them. Now, drivers should check the pressure in each of their four tires, and if required, fill them. If, after doing so, the warning light and message still appear, you should contact your neighborhood mechanic or a Toyota dealership to have the problem further investigated.
How Do You Reset the Tire Pressure Monitoring System?
Sometimes the alert will also appear after you rotate your tires, change your tire size, or adjust the tire pressure. In these situations, all you have to do is reset the TPMS to account for the modifications you made to your car’s tires. Simply press and hold the while the engine is running to reset the TPMS “Most Toyota models include a reset button on the instrument panel to the right of the steering wheel. Keep the “Press the reset button three times until the TPMS Warning Light blinks slowly. To finish the reset procedure, let the engine run for a few more minutes and then shut it off again.
Visit us at Toyota Palo Alto right away if this procedure doesn’t work if you think your Toyota vehicle’s TPMS is seriously malfunctioning. Visit us as well to learn more about the service deals we have to offer!
How long before the tire pressure light appears?
After a few kilometers of driving, the light may turn off if the tires are adequately inflated. After around 10 miles, if the light still remains on, it may be necessary to reset the TPMS as instructed in the owner’s handbook of the car.