Make sure the tire pressures are accurate before resetting the system. After starting the car, hold down the reset button while doing so. On the instrument panel, it is located low and to the right of the steering wheel. Hold down the button until the instrument panel’s tpms indicator light blinks gently three times.
The 2010 Toyota Corolla’s reset button for the tire pressure light can be found on the instrument panel, within the glove compartment, or on the knee bolster. Hold on until there are three light flashes.
The best option is to have the shop remove the sensors the next time you buy tires and replace them with regular fill valves. Discover how to inspect your tires like your father did. has no expense at all
In all honesty, I own a 2010 Corolla and have been a licensed auto technician for 36 years. I am aware of Al’s concerns with the intermittent on-and-flashing of the tps light. If you give it some thought, the solution is actually rather straightforward! The first thing to note is that modern cars include a variety of control modules, each of which functions as the system’s brain. The computer or module is configured to keep all tires within 3-6 psi of the manufacture requirements, which are on your door jam. You also have sensors that feed that module or brain, providing information about how the system is operating and performing. As long as a pressure stays within the manufacturer’s specifications, the light on your dash won’t turn on. If it is too high or low, however, the sensors will transmit signals to the module, which will turn on the light. Now, if the light is constantly on, there may be a sensor or pressure problem. Now, if the light is always flashing, there is probably an issue with the computer or a module. If you visit a store and scan the module, it will provide the information you need. A DTC is a diagnostic problem code. The scanner will read the code and will immediately inform you of the precise problem with that d**n bulb! If you discover a DTC saved in the TPMs module, it will generally be code: C2141 the computer or module has a problem with that code.
In This Article...
How much air pressure should a 2010 Toyota Corolla have?
Optimal Tire Pressure You should use different tire pressures for the front and rear wheels of the Toyota Corolla. Utilize the following advice: 38 psi in the front tires. 36 psi in the rear tires.
Why won’t my tire pressure warning light turn on?
Try the following if your TPMS light is still on after you have inflated your tires to the recommended pressure: 10 minutes at a speed of 50 mph would be plenty. When you start the car again, the TPMS light ought to be off because this ought to reset the tire sensors.
Where is the button to reset my TPMS?
Tire pressure monitoring system is referred to as TPMS. The TPMS reset button is often located below the steering wheel. Your car’s TPMS needs to be electronically reset after you replace the tires in order to erase the error message. Hold the TPMS reset button down until the tire pressure light blinks three times, then let go of the button to complete the process. Your car should be started, and the sensor will refresh after 20 minutes.
On a 2010 Toyota Camry, how do you reset the low tire pressure indicator?
Open the glove box to reveal a reset button that is tucked away beneath a little lip to the left of the glove box. Hold down the button until the TPMS light gently blinks three times.
Why is my tire pressure light on when my Toyota Corolla’s tires are fine?
Several cars now come with a built-in tire pressure monitoring system (TPMS). An indication light will flash on your dashboard if the air pressure in your tires drops below the recommended level.
The information system in the dashboard may have a menu that shows you which of the four tires is malfunctioning. The TPMS indicator may be on in a number of circumstances, however your tires may not require replacement or upkeep.
If this occurs and all of your tires seem to be in good condition. This light may illuminate even if your tires are in good condition for a number of different reasons. The decrease in outdoor temperature is one explanation. To double-check and confirm it, it is advisable to maintain a tire pressure gauge in the automobile.
On a Toyota Corolla, where is the reset button located?
Put the maintenance light out.
Corolla, Toyota Put the Corolla’s keys in. Don’t start the car; instead, turn the key to the “On position. In order to make “Trip A” appear on the main screen, press and hold the trip reset button next to the odometer. Reset the key to “Off.”
How can the dashboard lights be turned on in a 2010 Toyota Corolla?
Congratulations on purchasing your first automobile! I’m delighted to report that the Corolla’s *dashboard light controls** make it simple to turn on and adjust your dashboard lights. Use them as follows.
Typically, when you start your automobile, your dashboard lights should come on. If they don’t, your dashboard light controls may have them completely dimmed.
Find the dashboard light switch to the left of the steering wheel once your car is running. This will either be a knob or a wheel, depending on the year of your Corolla. Next to the control, you should see a tiny image of your speedometer. You can adjust the brightness or dimness of your dashboard light with the control.
If the dashboard lights are still not functioning, a fuse may have blown. Although they are quite simple to replace, you’ll need to see a professional.
It’s a big thing getting your first car! You might have to pay more for insurance if you’re a new driver or a young one. With Jerry, the insurance super app, you can make sure you’re getting the most affordable insurance imaginable! For free, instant, affordable insurance quotes, download Jerry today!
What does a 2010 Toyota Corolla “maintenance necessary” mean?
On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.
In what location on a 2010 Toyota Corolla is the TPMS button?
Turn the key to the “on” position with the car off, but don’t let it run. When the Toyota tire pressure sensor blinks three times, hold down the TPMS reset button until it stops blinking. Start the car, then let it run for 20 minutes to let the sensor reset. Under the steering wheel is typically where you’ll find the TPMS reset button.
How can I turn off the tire pressure warning light?
How to Clear the Tire Pressure Indicator
- Don’t start the car; just turn the key to “on.”
- While the car is off, disconnect the positive battery cable.
- All tires, including the spare, should be 3 PSI overinflated before being entirely deflated.
- Bring your car to our service department for qualified help.
Why, after filling the tires, is the tire pressure light still on?
If you’ve inflated your tires, but the air pressure warning light continues to flash, your tire pressure monitoring system is malfunctioning or you have a gradual leak. A bright TPMS warning light indicates a problem with a tire pressure sensor, assuming there isn’t a leak in your tire. One of them might be damaged, the lithium-ion battery might be dead, or the TPMS itself might have an internal problem. You’ll need to get your Tire Pressure Monitoring System repaired in any of these scenarios.
Quick Tip: Recheck the tire to ensure it is inflated to the correct air pressure if the TPMS warning light illuminates again after you have inflated it. Low tire pressure indicates an air leak, which requires repair or tire replacement.
Why is the Toyota tire pressure warning light blinking?
The tire pressure monitoring system, or TPMS, in your automobile is designed to alert you when the air pressure in your tires is low. If one or more of your tires are underinflated, the TPMS will activate.
What is the Toyota Corolla’s typical tire pressure?
How can I determine my Corolla’s tire pressure? Comparing the valve reading to the 32 PSI tire pressure advised for your Corolla If the pressure in your tires is too low, blow air into them until they reach 32 PSI. To release some air if your tire pressure is too high, push the valve in.
What is the Toyota Corolla’s recommended tire pressure?
pressure in a Toyota Corolla tire The 2019 Toyota Corolla’s recommended minimum tyre pressure is 35 psi, according to this tire placard. This is equivalent to 2.4bar and 240kPa.
Will the tire pressure light automatically turn off?
Even when the tires are in good shape, the low tire pressure light may occasionally remain on. In such circumstances, you should manually check the tire pressure to make sure there is no issue. People frequently witness this light in the coldest part of the day, the morning. However, the light occasionally turns off when the temperature rises. In any case, until the air warms up and expands, your tires may still be a few PSI under-inflated in cool weather.
A defective tire pressure sensor often exhibits three symptoms. When you discover that your tires are flat but the sensor didn’t alert you, it is the first scenario. The second sign that anything is wrong with the sensors is when your ECU turns on the TPMS light on your dashboard. When the sensor suggests that you have a flat tire when you are aware that you don’t, it is the third indication of an inaccurate alert.
After a few kilometers of driving with properly inflated tires, the sensor light typically turns off. However, you should reset the TPMS in accordance with the directions in the owner’s manual if it doesn’t turn off automatically after traveling for around 10 miles.
In 2008, the U.S. Department of Transportation mandated that tire pressure monitoring systems be installed in all automobiles. As a result, even if you can reset it, the TPMS in your car cannot be turned off.
Technically, driving with the TPMS light on is possible, but it is not recommended. The sensor alert indicates either an under- or over-inflated tire. Ignoring this warning could result in excessive tire wear or possibly a blowout, all of which could be dangerous for you and other road users.
Is driving permitted while the tire pressure light is on?
You should be able to find our store or an air pump if the light just came on and you need to get there. However, it is unsafe to keep driving while the light is on. This is why: When you drive your car with low tire pressure, you accelerate the premature and severe tire wear.
Where are TPMS installed?
In the US, direct TPMS usage is more prevalent. The sensors are either housed in the tire pressure valve, which also serves as an antenna, or they are band-clamped to the wheel rim. These gadgets deliver the data to an on-board computer.