How To Reset Tire Pressure Light On Toyota Tacoma

Tire Pressure Monitoring System (TPMS) informs drivers if the tire pressure in any of the tires changes in late-model Toyota Tacoma pickup trucks. Although this is a helpful safety feature, there are some circumstances that could lead to the low-pressure indicator light turning on when it shouldn’t, such as when moving large weights or rotating tires. Restart the system if this happens.

Step 3

The TPMS reset button is next to and to the left of the steering wheel. Press and hold it. The word “Set” is written beneath the button. Be on the lookout for the dashboard’s speedometer display’s blinking TPMS warning light. Release the button after three blinks.

Step 4

Watch for the TPMS warning light after the car has been restarted. If it restarts, blinks briefly, and then stays lit, there is a systemic issue that has to be looked at by a technician. The TPMS system has been successfully reset if the light doesn’t turn back on.

  • air tube
  • tire pressure gauge

On a 2017 Toyota Tacoma, how do you reset the tire pressure light?

Turn the key to the “on” position with the car off, but don’t let it run. When the Toyota tire pressure sensor blinks three times, hold down the TPMS reset button until it stops blinking. Start the car, then let it run for 20 minutes to let the sensor reset.

On a 2018 Toyota Tacoma, how do you reset the tire pressure sensor?

Turn the key to the “On position when the car is off, but don’t let it run. When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the car and let it run for 20 minutes to let the sensor reset.

How can the TPMS light on a 2007 Toyota Tacoma be reset?

1) Adjust the tire pressure on all of your tires to the recommended level. 2) Switch the ignition to the ON position. 3) To make the tire pressure warning light blink three times, press and hold the tire pressure warning reset switch for at least three seconds. 4) Disconnect the ignition switch.

Where is the button to reset my TPMS?

Tire pressure monitoring system is referred to as TPMS. The TPMS reset button is often located below the steering wheel. Your car’s TPMS needs to be electronically reset after you replace the tires in order to erase the error message. Hold the TPMS reset button down until the tire pressure light blinks three times, then let go of the button to complete the process. Your car should be started, and the sensor will refresh after 20 minutes.

Why, Toyota, does my tire pressure light remain on even after filling the tires?

Try the following if your TPMS light is still on after you have inflated your tires to the recommended pressure: 10 minutes at a speed of 50 mph would be plenty. When you start the car again, the TPMS light ought to be off because this ought to reset the tire sensors.

On a 2016 Toyota Tacoma, how do you reset the tire pressure sensor?

After changing or rotating your tires, start the engine to reset the system. In the glove box, push and hold the reset button until the TPMS icon slowly blinks three times. Turn off the engine after giving the system some time to record the pressure of each tire.

My tires are in good condition, so why is my low tire pressure sign on?

Typically, a tire with an air pressure that is 10% to 15% low will turn on the warning light. The air pressure inside the tires also tends to drop in cold or icy conditions. Short trips in the car will warm up the tires and raise the pressure in them.

Should the TPMS be reset after purchasing new tires?

After changing or rotating your tires, or after adding new sensors, you should always reset your TPMS. Even after you have inflated your tires, some sensor manufacturers advise restarting the device. By teaching the primary TPMS system to identify the sensors in their new locations, resetting the TPMS is frequently referred to as retraining the system. TPMS reset procedures vary from vehicle to vehicle and typically involve a specific sequence of ignition and pedal actions, a configuration change in your dashboard menu, or the use of a TPMS Reset Tool.

Driving with the TPMS light on is it safe?

There are several possible meanings when you see that silly little light with the exclamation point glaring back at you. It’s frequently anything as harmless as temperature changes that result in a change in the tire’s air pressure. In more severe situations, a puncture or other damage has caused the tire to lose pressure. The sensor can also be activated and result in the light coming on if your tires are overinflated.

Is It Safe To Drive With TPMS Light On?

To avoid seeming like Debbie Downer, we’ll simply say no. Driving around with your TPMS light on is not safe. You can’t tell how quickly your tire is losing air or how long it has been over- or underinflated without doing a tire examination. The best course of action is to check the current inflation level of each tire with a tire pressure gauge.

When the tire inspection light appears while you are driving, slow down and get to the closest gas station or service facility.

Will the tire pressure light automatically turn off?

After a few kilometers of driving, the light may turn off if the tires are adequately inflated. After around 10 miles, if the light still remains on, it may be necessary to reset the TPMS as instructed in the owner’s handbook of the car.

Why does my tire pressure light remain on even after I inflated it?

If your tires are properly inflated yet the warning light continues to illuminate, you may have a leak or a TPMS issue in one or more of your tires. To determine if a tire has a leak is not difficult. Simply double-check the air pressure in each of your tires with your tire gauge. If all of the tires have the proper air pressure, one or more tire pressure sensors are likely to be at fault, necessitating repair work on your tire pressure monitoring system. You’ll need to replace or repair the tire if you notice that one or more of your tires’ air pressures have fallen.

How can the TPMS light on a 2017 Toyota Tundra be reset?

It’s crucial to maintain the correct tire pressure, especially if you’re planning a road trip. Therefore, before turning off the light, check sure your tires are properly filled and free of leaks. Otherwise, you can be brushing off a significant problem.

However, if you are certain that your tires are in good condition, you can reset the tire pressure light on your Toyota Tundra using one of the following techniques:

  • When you see the light flash three times, hold down the tire pressure reset button located under your steering wheel. You must then give your tire pressure sensor 20 minutes to adjust after you have completed this. For this stage, your automobile should be turned on but the engine should not be running.
  • For at least 10 minutes, drive at a speed greater than 50 mph. Occasionally, doing this will assist your sensor in determining whether or not your tires are adequately inflated. It can cause your pressure light to switch off as a result.
  • Before totally deflating any tire, fill it to the required pressure plus around 3 PSI. The light ought to go off once you have refilled them to the suggested pressure.

Hopefully, one of these techniques will enable you to turn off the truck’s tire pressure warning light. However, if the light still won’t go out, look for further information in your owner’s manual. Keep in mind that fluctuations in tire pressure caused by the weather could potentially cause your tire sensor to malfunction.

Take a moment to save on auto insurance with Jerry when you’re already taking the time to adjust your tire pressure light. The Jerry app, a registered broker, offers free personalized price comparisons from more than 50 leading companies, including Allstate and Progressive. Jerry users save $879 on average year on auto insurance, and signing up only takes a minute.