The Tire Pressure Monitoring System, or TPMS, alerts you when the air pressure in one or more of your tires is critically low by using pressure sensors and transmitters in each wheel. The system does not feature space-saving spare tires.
The TPMS icon will emerge on the instrument display and stay on if the system detects low air pressure. Check the full-size spare tire, if you have one, as well as all four installed tires if the indication illuminates. Replace or refill the low tire(s). You might need to re-initialize the system after rotating the tires, adjusting the tire inflation pressure, carrying heavy cargo, or switching the tire size.
- Start by putting the parking brake on, turning off the ignition, and parking the car in a secure location.
- According to the owner’s manual, confirm that all tire pressures are appropriate.
- Start the car’s engine.
- On the instrument panel, look for the TPMS reset button to the left and below the steering wheel.
- Once the TMPS indicator light begins to slowly blink three times, press and hold the button.
- Turn off the vehicle after waiting a while with the engine running.
A fully functioning Toyota expert must repair the system if the light comes on, blinks for one minute, and then stays on.
In This Article...
TPMS reset button, closed loop
A “SET” or “TPMS RESET button can be found on some Toyota vehicles and is either under the glove box or beneath the steering wheel. The system searches for the already-stored sensor IDs when the button is pressed. The “SET button can be utilized while replacing tires, changing or altering tire pressure, changing tire size, or conducting a tire rotation with differing tire pressures in the front and back.
The ECU must be unlocked in order for the relearn method to function properly if the “SET button is pushed after new sensor IDs are introduced but before a relearn is carried out. A few sophisticated TPMS diagnostic tools can unlock the ECU. You can successfully complete the relearn procedure if your TPMS scan tool offers the “UNLOCK ECU option.”
Alloy vs Steel wheels:
Steel or alloy wheels were available for the Toyota Sienna during the years of 2006 and 2013. Make sure to select the appropriate manufactured alloy or steel wheels in the TPMS tool while seeking up TPMS sensors or kits for replacement.
The TPMS reset button is where?
Tire pressure monitoring system is referred to as TPMS. The TPMS reset button is often located below the steering wheel. Your car’s TPMS needs to be electronically reset after you replace the tires in order to erase the error message. Hold the TPMS reset button down until the tire pressure light blinks three times, then let go of the button to complete the process. Your car should be started, and the sensor will refresh after 20 minutes.
Why, Toyota, does my tire pressure light remain on even after filling the tires?
Try the following if your TPMS light is still on after you have inflated your tires to the recommended pressure: 10 minutes at a speed of 50 mph would be plenty. When you start the car again, the TPMS light ought to be off because this ought to reset the tire sensors.
How can I make my low tire pressure warning light come on?
How to Clear the Tire Pressure Indicator
- Don’t start the car; just turn the key to “on.”
- While the car is off, disconnect the positive battery cable.
- All tires, including the spare, should be 3 PSI overinflated before being entirely deflated.
- Bring your car to our service department for qualified help.
My tires are in good condition, so why is my low tire pressure sign on?
Typically, a tire with an air pressure that is 10% to 15% low will turn on the warning light. The air pressure inside the tires also tends to drop in cold or icy conditions. Short trips in the car will warm up the tires and raise the pressure in them.
How can the TPMS light on a 2006 Toyota Sienna be reset?
Toyota Sienna (20062012) TPMS Reset Instructions
- Set all tires’ air pressure to the value listed on the tire placard.
- Set the ignition to the ON position.
- When the TPMS indicator flashed three times, hold down the tire pressure reset button (found on the instrument panel, the knee support, or within the glove box).
How do I turn my Toyota TPMS light back on?
Resetting the Tire Pressure Light on a Toyota Turn the key to the “On position when the car is off, but don’t let it run. When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the car and let it run for 20 minutes to let the sensor reset.
Should the TPMS be reset after purchasing new tires?
After changing or rotating your tires, or after adding new sensors, you should always reset your TPMS. Even after you have inflated your tires, some sensor manufacturers advise restarting the device. By teaching the primary TPMS system to identify the sensors in their new locations, resetting the TPMS is frequently referred to as retraining the system. TPMS reset procedures vary from vehicle to vehicle and typically involve a specific sequence of ignition and pedal actions, a configuration change in your dashboard menu, or the use of a TPMS Reset Tool.
On a 2000 Toyota Sienna, how do you reset the tire pressure light?
Toyota Sienna TPMS Reset Instructions (19982006)
- Hold down the tire pressure reset button (found on the instrument panel, the knee bolster, or within the glove box) until the TPMS indicator stops blinking.
In what location is the TPMS sensor?
In the US, direct TPMS usage is more prevalent. The sensors are either housed in the tire pressure valve, which also serves as an antenna, or they are band-clamped to the wheel rim. These gadgets deliver the data to an on-board computer.
Why, even after adding air, does my tire pressure light remain on?
If you’ve inflated your tires, but the air pressure warning light continues to flash, your tire pressure monitoring system is malfunctioning or you have a gradual leak. A bright TPMS warning light indicates a problem with a tire pressure sensor, assuming there isn’t a leak in your tire. One of them might be damaged, the lithium-ion battery might be dead, or the TPMS itself might have an internal problem. In any of these circumstances, you’ll need to have repair work performed on your Tire Pressure Monitoring System.
Quick Tip: Recheck the tire to ensure it is inflated to the correct air pressure if the TPMS warning light illuminates again after you have inflated it. Low tire pressure indicates an air leak, which requires repair or tire replacement.
Why does my tire pressure light remain on even after I inflated it?
If your tires are properly inflated yet the warning light continues to illuminate, you may have a leak or a TPMS issue in one or more of your tires. To determine if a tire has a leak is not difficult. Simply double-check the air pressure in each of your tires with your tire gauge. If all of the tires have the proper air pressure, one or more tire pressure sensors are likely to be at fault, necessitating repair work on your tire pressure monitoring system. You’ll need to replace or repair the tire if you notice that one or more of your tires’ air pressures have fallen.
How long before the tire pressure light appears?
After a few kilometers of driving, the light may turn off if the tires are adequately inflated. After around 10 miles, if the light still remains on, it may be necessary to reset the TPMS as instructed in the owner’s handbook of the car.
Why will my tire light not turn on?
When the TPMS warning light illuminates, proceed with caution. This indicates that at least one of your tires may be at least 25% under-inflated.
*The simplest way to get the most accurate reading is to check the tire pressure before you drive on it when the tire is “cool.” If your TPMS light is on, first check that you have correctly reset your TPMS by following these instructions.
Will my TPMS light automatically turn off if I fill my tires with air after it illuminates?
Several minutes after reinflating the tires to the prescribed pressure, the TPMS light ought to go out.
What happens if I adjust the tire pressure but the light on my tire pressure gauge still doesn’t go out?
The only place that can fix a computer issue that causes the TPMS warning light to turn ON and flash ON for one second and OFF for three seconds is the dealership service center. When the TPMS warning light illuminates and remains on, one or more tires may have low tire pressure. The light ought to go out once the tire is inflated to the recommended tire pressure listed on the door placard. Always check the pressure in all of your tires because one or more of them may not be at the proper pressure.
I have a low tire pressure light on. Can I drive?
You should be able to continue driving safely for a few more miles until you can add air if your tire pressure is only slightly low. Extremely low tire pressure can cause tires to fail. A blowout could happen from this, which is quite risky. Additionally, you’ll have poor traction and your automobile won’t be able to adequately cushion the effects of the road. This is quite risky when it’s raining or snowing since your tires won’t be able to obtain a good grip on the road when you’re driving and making turns.
You should not disregard the tire pressure light because it is intended to notify you to an air pressure problem. You run the danger of getting a flat tire if you don’t check the air. A blowout can have major consequences that could endanger your safety, the safety of your passengers, and the safety of other road users. As soon as you can, stop at a gas station and top off the tires’ air pressure till it is appropriate. It offers the best protection against excessive tread wear and potential accidents.