1) As stated on the tire and loading information label, set the tires to the prescribed (cold) pressures. 2) Switch the ignition on. 3) When the tire pressure warning light blinks three times, press and hold the tire pressure warning reset switch for at least three seconds (one second on, one second off).
In This Article...
How can I turn my Toyota Highlander’s tire pressure warning light back on?
Turn the key to the “on” position with the car off, but don’t let it run. When the Toyota tire pressure sensor blinks three times, hold down the TPMS reset button until it stops blinking. Start the car, then let it run for 20 minutes to let the sensor reset.
The TPMS reset button is where?
Tire pressure monitoring system is referred to as TPMS. The TPMS reset button is often located below the steering wheel. Your car’s TPMS needs to be electronically reset after you replace the tires in order to erase the error message. Hold the TPMS reset button down until the tire pressure light blinks three times, then let go of the button to complete the process. Your car should be started, and the sensor will refresh after 20 minutes.
What does the triangle in a Toyota Highlander with the exclamation point mean?
Have you ever been operating your Toyota Highlander when a symbol suddenly appeared on the dashboard? If so, then every sign has a unique meaning. Everybody occasionally gets a visit from a dashboard light.
While some lights are only indicators, others are alarms indicating your Highlander requires regular upkeep or repairs. It’s crucial to understand what each dashboard light on your vehicle indicates.
An indication light is any light that appears on the Toyota Highlander’s dashboard and is either blue or green. A light that alerts you that anything in your car is on is what an indicator light does exactly as it sounds. The majority of the time, it indicates on your dashboard whether a Highlander feature has been activated or canceled.
Some of the typical warning lights that you might see are listed below:
- The VSC/TRAC OFF Indicator shows whether the traction control or vehicle stability control systems are activated or off. To turn off the light, push and hold the switch while the car is still moving.
- An emblem in the shape of a key will display on your Toyota Highlander’s dashboard to let you know that the security system is operating as intended.
- An icon resembling a speedometer serves as a visual cue that the cruise control system is engaged.
- Headlight High Beam Indicator: This blue light signifies the active state of the headlight high beams.
- TRAC OFF Indicator: This light appears to alert you to the need to turn off the vehicle’s traction control and/or stability control systems.
- Turn Signal Indicator: These green lights signify that the Highlander’s right or left turn signal has been engaged.
Your Toyota Highlander will have a warning light if it has a yellow or red light. A warning light is typically an issue that needs to be resolved right away in order to keep your SUV in the finest condition possible. If you notice any of the lights listed below, get in touch with our service staff to arrange a visit:
- Electric Power Steering (EPS) Warning Light: It’s critical to have your Highlander evaluated if this warning light, which looks like a steering wheel next to an exclamation point, comes on your dashboard.
- Master Warning Light: When the master warning system detects a problem, a triangle with an exclamation point inside of it shows on the dashboard and a buzzer sounds.
- When an icon resembling an old-fashioned oil can appears, it means your oil pressure is too low and should be checked. Low Engine Oil Pressure Warning Light: You should take immediate action to address this problem in order to prevent potential engine damage.
Why, Toyota, does my tire pressure light remain on even after filling the tires?
Try the following if your TPMS light is still on after you have inflated your tires to the recommended pressure: 10 minutes at a speed of 50 mph would be plenty. When you start the car again, the TPMS light ought to be off because this ought to reset the tire sensors.
Why are my tires fine but my TPMS light is on?
It’s likely that one or more of your tires have low air pressure if you see the tire pressure indicator turn on. However, even if your tires are in good condition, there are a number of things that could cause the sensors to go off, so you shouldn’t rely only on the data from the tire pressure monitoring system of your car.
We’ve talked about some additional aspects of automobile maintenance in this piece. Read these articles if you have some time:
Why won’t my tire pressure warning light turn on?
When the TPMS warning light illuminates, proceed with caution. This indicates that at least one of your tires may be at least 25% under-inflated.
*The simplest way to get the most accurate reading is to check the tire pressure before you drive on it when the tire is “cool.” If your TPMS light is on, first check that you have correctly reset your TPMS by following these instructions.
Will my TPMS light automatically turn off if I fill my tires with air after it illuminates?
Several minutes after reinflating the tires to the prescribed pressure, the TPMS light ought to go out.
What happens if I adjust the tire pressure but the light on my tire pressure gauge still doesn’t go out?
The only place that can fix a computer issue that causes the TPMS warning light to turn ON and flash ON for one second and OFF for three seconds is the dealership service center. When the TPMS warning light illuminates and remains on, one or more tires may have low tire pressure. The light ought to go out once the tire is inflated to the recommended tire pressure listed on the door placard. Always check the pressure in all of your tires because one or more of them may not be at the proper pressure.
The tire pressure light comes on for what reason?
The gauge cluster on an automobile’s dashboard is normally where the tire-pressure warning lights are positioned. Warning lights typically have an exclamation point and/or the letters “TPMS” and look like a cross section of a tire in yellow or amber. One may be seen immediately to the left of the speedometer in the image above. When the tire-pressure monitoring system of the vehicle detects low air pressure in one or more tires, this little indicator glows to let you know (TPMS).
The light often illuminates when one or more tires have air pressure that is outside the ideal range. Since the tires’ ideal performance and safety benefits are only seen within a certain range of air pressure, expressed in pounds per square inch (psi), the warning light may turn on even before low pressure is apparent to the naked eye by as little as 10%.
The more advanced tire-pressure monitoring systems, including some spare tire systems, can sometimes display the air pressure in each tire in real-time or alert drivers to which tire is out of range.
Don’t ignore the tire-pressure warning light if it turns on; you might be getting a flat.
A tire’s tendency to lose around a pound of air pressure each month and a pound for every 10 degrees of temperature change can cause low pressure, as can leaks. Therefore, even if your tires are adequately filled in the summer, they can be too low by the winter to trigger the tire-pressure alarm. Similar to this, if the temperature rises high enough to raise the tires’ pressure to a safe level, a tire-pressure light that illuminates on a cool morning may turn off. Another reason the TPMS warning may be on early in the morning and turn off later in the day is because as you drive, tires warm up and experience an internal pressure increase of roughly 3 psi.
It’s time to check your tires’ pressure with a tire-pressure gauge, which can be purchased for as little as $5, whenever a tire-pressure warning light illuminates. A monthly tire pressure check can help you maintain your tires’ ideal levels of inflation and will give you the opportunity to spot slow leaks earlypossibly even before the pressure goes too low and the warning light illuminates.
This information was imported. At their website, you might be able to discover the same material in a different format or more details.
How can I check my Toyota Highlander’s tires for pressure?
Inspection and correction techniques wheel valve gauge for tire pressure Uncap the tire valve. On the tire valve, firmly squeeze the tire pressure gauge’s tip. Utilize the gauge gradations to determine the pressure. Adjust the pressure if the tire inflation is not at the appropriate amount.
How much are tires for a Toyota Highlander?
Normal 2021 Toyota Highlander tires cost $150 to $350 per, however high-performance tires can cost up to and including $500.
Does Toyota alert you to a low tire?
Tire Pressure Monitoring Systems are standard on all new Toyota vehicles (TPMS). Essentially, the system’s function is to inform drivers when a tire or tires are in need of being refilled, repaired, or replaced. Any queries customers may have about the TPMS in their Toyota car can be addressed by the service team here at Toyota Palo Alto. Come see how the Tire Pressure Monitoring System in Your Toyota Vehicle operates with our team today!
What Should You Do When the Tire Pressure Monitoring System Warning Light is Active?
In order to measure the tire pressure for each of the car’s four tires, the Tire Pressure Monitoring System in your Toyota vehicle essentially uses sensors. The TPMS Warning Light and a warning message will both illuminate on your Toyota instrument panel when one or more of your tires have too little air in them. Now, drivers should check the pressure in each of their four tires, and if required, fill them. If, after doing so, the warning light and message still appear, you should contact your neighborhood mechanic or a Toyota dealership to have the problem further investigated.
How Do You Reset the Tire Pressure Monitoring System?
Sometimes the alert will also appear after you rotate your tires, change your tire size, or adjust the tire pressure. In these situations, all you have to do is reset the TPMS to account for the modifications you made to your car’s tires. Simply press and hold the while the engine is running to reset the TPMS “Most Toyota models include a reset button on the instrument panel to the right of the steering wheel. Keep the “Press the reset button three times until the TPMS Warning Light blinks slowly. To finish the reset procedure, let the engine run for a few more minutes and then shut it off again.
Visit us at Toyota Palo Alto right away if this procedure doesn’t work if you think your Toyota vehicle’s TPMS is seriously malfunctioning. Visit us as well to learn more about the service deals we have to offer!
Will the TPMS light turn on if my tires are over-inflated?
You most likely have a Tire Pressure Monitoring System (TPMS) installed if you drive a more recent vehicle. Your tires’ internal electrical TPMS system keeps track of their air pressure. The TPMS turns on a dashboard warning light if your tires are either under- or over-inflated. You need to have your tire pressure checked if the light is steady. You should have your TPMS examined if the light is flashing.
Visit one of our stores for a free tire pressure check if you notice the TPMS light. If you’re on the road, fill up your tires with air as soon as you can at a petrol station. unsure how much more to say? For further information, see How to Check Tire Air Pressure.
Don’t panic if the TPMS light illuminates or flashes after you install the spare if you need to change a tire. Nothing to worry about there; that’s merely the system’s way of letting you know it can’t locate a TPMS unit in the spare tire.
Accurate tire pressure is now possible thanks to TPMS. It automatically alerts you when the pressure is low, keeping you safer, preventing damage to your tires, and increasing your MPG.