The 2013 Toyota Corolla’s tpms can be reset in a few simple steps. Making ensuring the tires are inflated properly is the first and most crucial step. The recommended pressure for the front and rear tires of the 195/65R15 tire size, which is the tire size for the L, is 30 psi. For the 205/55R16 tire size, which is the tire size for the LE and the S, the recommended pressure is 32 psi. Make sure the car is parked, check the tire pressure, and then turn the ignition on. Locate the tire pressure reset button, which is either within the glove box, on the instrument panel, or on the knee bolster. When the tire pressure light blinks three times, press and hold the button. After about five minutes, turn the car off or lock it.
Turn on your 2013 Toyota Corolla after checking sure the tires are properly inflated. On the instrument panel, look for the reset button next to the steering wheel. Hold down that button until you see the instrument panel’s tpms indicator light blink three times. Turn the button off.
In This Article...
On a 2013 Toyota Corolla, where is the TPMS reset button located?
When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the car and let it run for 20 minutes to let the sensor reset. Under the steering wheel is typically where you’ll find the reset button for the tire pressure monitor.
On a 2013 Toyota Camry, where is the TPMS reset button located?
The owner’s manual contains the process. Each tire should be given the desired pressure. Start the ignition, but don’t let the vehicle go. Then, open the glove box. A reset button is located on the left side.
Where is the reset button for the Toyota tire pressure monitoring system hidden?
Under the steering wheel is typically where you’ll find the TPMS reset button. Consult the owner’s manual for your car if you can’t find it. All tires should be inflated to 3 PSI more than what is suggested, then completely deflated. Include the spare tire as well because it can include a sensor.
Why, Toyota, does my tire pressure light remain on even after filling the tires?
Try the following if your TPMS light is still on after you have inflated your tires to the recommended pressure: 10 minutes at a speed of 50 mph would be plenty. When you start the car again, the TPMS light ought to be off because this ought to reset the tire sensors.
Why is my tire pressure light on when my Toyota Corolla’s tires are fine?
Several cars now come with a built-in tire pressure monitoring system (TPMS). An indication light will flash on your dashboard if the air pressure in your tires drops below the recommended level.
The information system in the dashboard may have a menu that shows you which of the four tires is malfunctioning. The TPMS indicator may be on in a number of circumstances, however your tires may not require replacement or upkeep.
If this occurs and all of your tires seem to be in good condition. This light may illuminate even if your tires are in good condition for a number of different reasons. The decrease in outdoor temperature is one explanation. To double-check and confirm it, it is advisable to maintain a tire pressure gauge in the automobile.
Why are my tires fine but my TPMS light is on?
Even the best of us experience it. Whether you drive a car, truck, or SUV is irrelevant. Even when the tires are in good condition, the low tire pressure sign occasionally illuminates. The best line of action is to personally check each tire’s pressure to identify the issue. To remove the low tire pressure warning light from the dash after this, just reset the TPMS.
How can I turn off the tire pressure warning light?
How to Clear the Tire Pressure Indicator
- Don’t start the car; just turn the key to “on.”
- While the car is off, disconnect the positive battery cable.
- All tires, including the spare, should be 3 PSI overinflated before being entirely deflated.
- Bring your car to our service department for qualified help.
How long before the tire pressure light appears?
After a few kilometers of driving, the light may turn off if the tires are adequately inflated. After around 10 miles, if the light still remains on, it may be necessary to reset the TPMS as instructed in the owner’s handbook of the car.
Should the TPMS be reset after purchasing new tires?
After changing or rotating your tires, or after adding new sensors, you should always reset your TPMS. Even after you have inflated your tires, some sensor manufacturers advise restarting the device. By teaching the primary TPMS system to identify the sensors in their new locations, resetting the TPMS is frequently referred to as retraining the system. TPMS reset procedures vary from vehicle to vehicle and typically involve a specific sequence of ignition and pedal actions, a configuration change in your dashboard menu, or the use of a TPMS Reset Tool.
Can the tire pressure monitoring system be turned off?
On the gauge cluster of your car’s dashboard, a horseshoe-shaped emblem with an exclamation point lights when your tire is underinflated. The tire pressure monitoring system is the piece of equipment that generates this signal (TPMS).
Sensors provide the TPMS with data on the air pressure level. The air pressure sensors inside your tires or the anti-lock brake system’s wheel speed sensors may be used by your car’s TPMS, depending on the model.
In what location is the TPMS sensor?
In the US, direct TPMS usage is more prevalent. The sensors are either housed in the tire pressure valve, which also serves as an antenna, or they are band-clamped to the wheel rim. These gadgets deliver the data to an on-board computer.
How much does a TPMS battery replacement cost?
The battery cannot be changed separately because it is typically integrated into the TPMS sensor unit. As a result, the complete TPMS sensor must be replaced if the battery is depleted or dead, which might cost anywhere from $50 to $150 or more depending on the application and kind of sensor.