How To Reset The Maintenance Light On A Toyota Rav4

  • Put the ignition on with your key. Turn the key to the first position.
  • On the dashboard, press the reset trip meter button. Hold it down for a few seconds.
  • Hold the odometer button down for around five seconds.
  • Release the odometer button after it is off.

On a Toyota Rav 4 2021, how do you turn the maintenance light back on?

In order to start the car, turn the ignition to position one with your key in the ignition. Turn the key to position two while pressing and holding the trip meter reset button on the dashboard. For 10 seconds, keep your finger on the odometer button. Then the light should flash, beep, and finally turn off.

Why does my Rav4 indicate that maintenance is needed?

The significance of the emblem MAINT REQD is significant. The MAINT REQD light indicates when the vehicle’s scheduled maintenance is due when it illuminates. If your car is under two years old, this service can be covered by your ToyotaCare plan.

How can I dim the maintenance is necessary light?

How do I turn the “Maint Reqd” light back on?

  • Switch the ignition to the ON position.
  • Set the trip display to TRIP A mode on the odometer.
  • Activate the OFF position on the ignition switch.
  • Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
  • It will do so via the service maintenance reminder light.

Why does my maintenance light come on after I change the oil?

  • If the car is on, turn it off.
  • Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
  • Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
  • The ODO display will briefly flash before beginning to display only zeros.
  • Press and hold the ODO reset / readout button while the engine is off.
  • Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
  • Now the light will read “MAINT REQD.”

What ‘MAINT REQD’ Means

Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.

Need Help?

Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!

What does a 2007 Toyota Rav4’s maintenance required light mean?

On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.

How can you turn a Toyota’s maintenance light back on?

In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.

My maintenance is necessary light is on, why?

The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.

The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.

When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.