I’ll explain how to turn off the PRIUS C’s maintenance light in this section (2012, 2013, 2014, 2015). Although it differs significantly from the other Toyotas, it is essentially identical. Therefore, it is rather easy to implement on this particular model. The first action you should take is:
- I’ll turn it off right now.
- When the countdown reaches zero, the button will stop flashing and you’ll be finished.
- Power it up, but don’t start the engine.
- Once ODO appears, press the TRIP button instead of Trip A or B.
- Then you must restart the engine of the vehicle and push the TRIP button three times while holding it down on the third press.
For your information, this operation is compatible with the Prius V, Prius C, and Prius PHV as well as the third generation of the Toyota Prius (2010, 2011, 2012, 2013, 2014, and 2015 model years). I’ll try my best to give you a link below, however the model from 2016 to 2023 is slightly different.
In This Article...
How can I turn off the maintenance is necessary light?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
How can I turn off the Toyota maintenance is required light?
Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
Why does my maintenance light come on after I change the oil?
- If the car is on, turn it off.
- Now the light will read “MAINT REQD.”
- The ODO display will briefly flash before beginning to display only zeros.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Press and hold the ODO reset / readout button while the engine is off.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
My maintenance is necessary light is on, why?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.
What is a Toyota Prius’ maintenance schedule?
Toyota typically advises owners to make a service visit every 5000 miles or every six months, whichever comes first.
What distinguishes a maintenance requirement from a check engine light?
Many people are unsure of what each of these lights means, and the check engine light and the service engine soon light are frequently confused for one another. We’ll describe how distinct they actually are despite the fact that they appear to be similar.
Authored by: Bradley Hayes, Director of Marketing at Autoscope European Car Repair and Automotive Blogger
Since Karl Benz originally unveiled his Benz Patent Motorwagen, automotive technology has advanced significantly. In fact, the notion that computers are essentially controlling our cars in today’s computer-driven society shouldn’t be shocking. In order to assure the precise right operation of your vehicle’s numerous systems and components, they regulate and track their performance. They even notify the driver when the automobile needs repair or maintenance. While technology hasn’t yet given our cars voices (like Kitt from Knight Rider), it has made it possible for them to communicate in other ways, such as through a series of backlit symbols that show up in your instrument cluster, such as a “check engine” and a “service engine” light.
How far can you go when the maintenance light turns on?
Second, restarting the counter after changing the oil involves resetting the maintenance required light. As a consequence, you may travel securely on roads and you won’t need to manually count the miles since after 5,000 miles, this light will alert you that it’s time for a fresh oil change.
How soon after the maintenance necessary light do you have?
The maintenance required light will illuminate for approximately six seconds each time you start the vehicle to test the bulb before turning off. After 4,500 miles, a flashing maintenance required light turns on.