You must first open your driver’s side door if you wish to reset the oil maintenance light on your 2012 Toyota Prius. Put your key in the ignition and turn it to ON. Select Trip A or B on your odometer at this point. Remove the key from the ignition. Hold the odometer button while pushing the power button; do not release your grip on the odometer. You can release the button after you see dashes in the odometer. You should be aware that you have reset the Toyota Prius’s oil maintenance light.
On the 2012 Prius, though, OFF-Road the vehicle. Your foot should be on the brake pedal. To start the car, press and HOLD the km/MPH button while simultaneously pushing the Power button. When the status bar on the display shows “COMPLETE,” release the km/MPH button.
Holding down the odometer reset button while the car is off and continuing to hold it down while turning the ignition back on will reset the oil life on a 2012 Toyota Prius.
In This Article...
How can you turn off the Prius’s repair needed light?
Turn your key to the second position after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a total of 10 seconds. The light ought to flash, potentially beep, and then go off as a result. Release the odometer button once it has been turned off, then start the automobile.
How can I turn off the Toyota maintenance is required light?
Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
On a 2010 Prius, how do you reset the oil maintenance light?
If you often perform maintenance on your 2010 Toyota Prius, the tiny maintenance required light might become very aggravating. It will only take a few minutes to correct, though, and is extremely simple. Follow these steps to reset the oil maintenance light on a 2010 Toyota Prius:
- Resetting oil maintenance data should be visible on the display.
- The primary display should turn on in the center of the dashboard.
- While pushing the push-button start twice, press and hold the mph button that is immediately above it.
- Press the push-button start once to turn the car off.
- As you double-tap the start button, keep your foot off the brake.
- To get to Trip A, push the Trip button on the steering wheel.
It’s best to get regular oil changes to keep your Prius in good condition. You may also reset the maintenance light in a matter of minutes. But did you know that by downloading the Jerry app and comparing prices, you can also save hundreds on auto insurance in only a few minutes?
Jerry is a certified insurance broker who offers estimates from numerous reputable and highly rated auto insurance providers. Jerry can assist you in purchasing insurance and terminating your current policy after you discover a fantastic cost for your Toyota Prius. Customers often save close to $900 annually!
What is a Toyota Prius’ maintenance schedule?
Toyota typically advises owners to make a service visit every 5000 miles or every six months, whichever comes first.
Why does my maintenance light come on after I change the oil?
- If the car is on, turn it off.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Now the light will read “MAINT REQD.”
- The ODO display will briefly flash before beginning to display only zeros.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Press and hold the ODO reset / readout button while the engine is off.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
How is the oil change light reset?
Reset Oil Change Indicator
- Turn on the ignition.
- Both the stop and accelerator pedals should be fully depressed.
- Maintain firm pressure on the brake and accelerator pedals.
- A notice verifying the reset process is ongoing appears after three seconds.
How often should the oil be changed in a 2012 Prius?
Normally, synthetic oil needs to be changed every 7,500 to 10,000 miles. For conventional oil, Toyota advises changing your 2012 Toyota Prius’s oil and filter every 3,0005,000 miles.
What distinguishes a maintenance requirement from a check engine light?
Many people are unsure of what each of these lights means, and the check engine light and the service engine soon light are frequently confused for one another. We’ll describe how distinct they actually are despite the fact that they appear to be similar.
Authored by: Bradley Hayes, Director of Marketing at Autoscope European Car Repair and Automotive Blogger
Since Karl Benz originally unveiled his Benz Patent Motorwagen, automotive technology has advanced significantly. In fact, the notion that computers are essentially controlling our cars in today’s computer-driven society shouldn’t be shocking. In order to assure the precise right operation of your vehicle’s numerous systems and components, they regulate and track their performance. They even notify the driver when the automobile needs repair or maintenance. While technology hasn’t yet given our cars voices (like Kitt from Knight Rider), it has made it possible for them to communicate in other ways, such as through a series of backlit symbols that show up in your instrument cluster, such as a “check engine” and a “service engine” light.