Toyota Highlander Maintenance Light Reset Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for another 10 seconds or so. You can hear a beeping noise in addition to the maintenance light beginning to flash. The light ought should thereafter go out.
In This Article...
What type of oil should I use for my 2012 Toyota Highlander?
High Mileage 5W-20 Full Synthetic Motor Oil, 5 Quart, from Mobil 1 (Part No. 120768) Product attributes: For engines with more than 75,000 miles, Mobil 1 High Mileage full-synthetic motor oil 5W-20 is made to allow up to 10,000 miles between oil changes.
How can I turn off the Toyota maintenance is required light?
Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
Does my Toyota require synthetic oil?
There are two sorts of oil in the world, regular and synthetic, apart from different viscosities. Although there is a third variety that combines the first two, you often deal with either one or the other. The best option for your Toyota? What kind of oil is used in your Toyota? We offer all the solutions you require.
Does a Toyota need a specific kind of oil?
At this point, all current Toyota vehicles either require synthetic oil or at least recommend it. You must reference your manual to be certain. However, if you only decide to use synthetic oil, it will be far better for your engine and will simplify everything.
How frequently should a Toyota Highlander have its oil changed?
For traditional oil, Toyota suggests changing your Toyota Highlander’s oil and filter every 3,000 to 5,000 miles. Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles. Remember that the best way to determine the intervals for your vehicle is to consult the owner’s manual and the dealer.
Why is the oil light on even after I changed the oil?
If your oil light continues to illuminate even after changing the oil in your engine, you should examine the sensor to rule out a faulty sensor as the root of the problem. The oil pump might become clogged with dirt and other debris, leading the sensor to mistakenly report oil problems. Although changing the sensor is pretty straightforward, you should take your car to a qualified mechanic if you don’t feel confident doing it yourself. Low oil pressure is the following typical reason. Your oil light will turn on if the oil pressure drops below 5 pounds per square inch. You should check the oil level even though this shouldn’t happen after an oil change because you never know.
Even after an oil change, the final common cause of a lit oil light is perhaps the most troublesome. Numerous engine problems might result from the oil pump not circulating enough oil to maintain the engine’s parts lubricated and operating as intended. Parts do wear down over time, even though getting oil changes at regular intervals should prevent this issue from happening.
I just changed my oil, so why is my change oil light on?
Let’s move on to the car’s second oil light, the oil pressure light. When this light turns on, it indicates that the engine’s oil pressure has fallen, and you need to act right away. The engine of your car can suffer severe harm if you keep the light on while driving.
The light signifies that something is interfering with the engine’s ability to receive a continuous flow of oil from the oil pump to lubricate its components when it is operating normally. You can consider oil to be the vital component of your car’s engine. Your engine is protected from heat and friction with the right oil level. But without it, your engine can sustain damage quickly. Therefore, it’s crucial to routinely check your oil and filter. You must deal with it if the light comes on. Here is what to do.
- To do this, take out the dipstick, clean it with a rag, then put it back in the engine and pull it out again to check the level. The oil level is low if it is below the “full line.” (If you are having difficulties locating the dipstick, refer to your owner manual.)
- Next, locate the engine compartment of your car (often by lifting the hood) and check the oil level.
- Turn off your engine and first pull your car securely to the side of the road.
- If the dipstick does really show low oil, look for any indications that your car is leaking. A failing gasket or seal may be the cause of oil dripping. If there isn’t an obvious outward oil leak, the engine may have an interior issue.
Purchase the proper oil for your car’s kind and weight, then refuel the engine until the dipstick reads “full.” If the light remains on even after you restart your car, get a professional opinion by calling for a tow truck.
Why does my maintenance light come on after I change the oil?
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- If the car is on, turn it off.
- Now the light will read “MAINT REQD.”
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Press and hold the ODO reset / readout button while the engine is off.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- The ODO display will briefly flash before beginning to display only zeros.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
What distinguishes a maintenance requirement from a check engine light?
Many people are unsure of what each of these lights means, and the check engine light and the service engine soon light are frequently confused for one another. We’ll describe how distinct they actually are despite the fact that they appear to be similar.
Authored by: Bradley Hayes, Director of Marketing at Autoscope European Car Repair and Automotive Blogger
Since Karl Benz originally unveiled his Benz Patent Motorwagen, automotive technology has advanced significantly. In fact, the notion that computers are essentially controlling our cars in today’s computer-driven society shouldn’t be shocking. In order to assure the precise right operation of your vehicle’s numerous systems and components, they regulate and track their performance. They even notify the driver when the automobile needs repair or maintenance. While technology hasn’t yet given our cars voices (like Kitt from Knight Rider), it has made it possible for them to communicate in other ways, such as through a series of backlit symbols that show up in your instrument cluster, such as a “check engine” and a “service engine” light.