After every oil change, the Toyota Prius 20102011 needs to have its Oil Change Light Reset. The device won’t be able to accurately track when your next oil change is necessary if it is not reset.
The Toyota Prius 20102011 oil change light reset process is detailed below. After every oil change, reset the oil life monitor by following the instructions below.
In This Article...
Oil Change Light Reset Toyota Prius 2010 2011 Procedure
- Turn the ignition key to the “RUN position or press the “ENGINE START STOP button once.
- Verify the trip meter “A is shown; deactivate the ignition.
- Press the “ENGINE START STOP button once or flip the ignition key to the “RUN position while still holding the trip meter reset button.
- Hold the button down while waiting until “A 000000 is shown.
- Switch off the ignition.
Not Working?
Make sure you are following each step precisely and in the sequence shown in the Oil Change Light Reset Toyota Prius 2010 2011 procedure above if the oil change light reset method isn’t successfully resetting your oil life monitor. Restart your oil light reset method check HERE if this is not how to reset your vehicle’s oil life monitor.
How can you turn a 2011 Toyota’s maintenance light back on?
Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for a further 10 seconds. You can hear a beeping noise in addition to the maintenance light beginning to flash. The light ought should thereafter go out.
On a 2010 Prius, how do you reset the oil maintenance light?
If you often perform maintenance on your 2010 Toyota Prius, the tiny maintenance required light might become very aggravating. It will only take a few minutes to correct, though, and is extremely simple. Follow these steps to reset the oil maintenance light on a 2010 Toyota Prius:
- Resetting oil maintenance data should be visible on the display.
- Press the push-button start once to turn the car off.
- While pushing the push-button start twice, press and hold the mph button that is immediately above it.
- The primary display should turn on in the center of the dashboard.
- As you double-tap the start button, keep your foot off the brake.
- To get to Trip A, push the Trip button on the steering wheel.
It’s best to get regular oil changes to keep your Prius in good condition. You may also reset the maintenance light in a matter of minutes. But did you know that by downloading the Jerry app and comparing prices, you can also save hundreds on auto insurance in only a few minutes?
Jerry is a certified insurance broker who offers estimates from numerous reputable and highly rated auto insurance providers. Jerry can assist you in purchasing insurance and terminating your current policy after you discover a fantastic cost for your Toyota Prius. Customers often save close to $900 annually!
How can the maintenance needed light on a 2010 Toyota be reset?
How Can the Maintenance Required Light Be Reset?
- Turn on your car. Look at your dashboard when your key is in the on position.
- Press the Trip Meter Reset Button after turning off the engine.
- Re-start the vehicle.
- Keep pressing the reset button.
- Reset button released
How is the oil change light reset?
Reset Oil Change Indicator
- Turn on the ignition.
- Both the stop and accelerator pedals should be fully depressed.
- Maintain firm pressure on the brake and accelerator pedals.
- A notice verifying the reset process is ongoing appears after three seconds.
How can you turn a Toyota’s oil change light back on?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
How often should the oil be changed in a 2010 Prius?
One year or 10,000 miles, whichever comes first, is the recommended oil change interval for the 2010 Toyota Prius, for instance. Because some oil life monitors are more advanced than others, the recommended duration will vary depending on the vehicle.
What does the Toyota Prius’ red triangle mean?
Regular maintenance should be second nature for all car owners, especially since the majority of new automobiles alert us when an oil change is necessary or our tire pressure is low. The “red triangle of doom” on a Toyota Prius, however, resembles the check engine light on conventional combustion engines.
The warning light may just indicate low oil pressure, or it may indicate something more. Your initial course of action should be to have the codes scanned and diagnosed in case your hybrid car is dealing with a more serious problem.
Common Causes
The most frequent reason for a red triangle of death light on a Prius, according to several owners, is a problem with the battery. P0A80 and P3000 are frequently the codes that appear following a diagnostic.
The battery control system of the Prius is identified by the P300 code. This code indicates a fault with the HV battery’s ECU, albeit the reason of the issue is generally complicated. Your Prius may exhibit any of the following symptoms:
Can my Prius be operated while in maintenance mode?
The most efficient way to operate any car, whether it is a hybrid, electric, or gas-powered, is to drive more slowly. If you have a choice between several driving routes, pick the one with the fewest stops, the longest stretches, and a 45 mph speed restriction or less. When you approach the speed limit, release your foot from the gas or accelerator pedal and let the vehicle continue on with the least amount of acceleration.
WHICH MODE, PROCESS, SETTING, OR SYSTEM IS BEST FOR DRIVING A TOYOTA PRIUS OR HYBRID?
Today’s cars often have features that let the driver alter how the car behaves in various conditions. When attempting to increase fuel efficiency, the Eco mode is recommended. The accelerator, auto chips, and the onboard computer system all play a role in this. Torque will be produced by the system more gently than usual.
Through auto chips and relays, the driver can modify the vehicle’s engine and onboard computer system in eco mode to better regulate the vehicle’s acceleration. Through acceleration, this makes the car more fuel-efficient and provides a highly smooth ride. We are unaware of any car mechanics who believe that continuously using Eco Mode is harmful.
This question’s response depends on a wide range of variables. the Toyota Prius’s model year, the car’s condition, the road’s conditions, the weather, the vehicle’s speed, the car’s age and maintenance, and more. The answer is roughly 25 miles in ideal circumstances.
When neither the Eco Mode nor the Power Mode is selected, normal mode is in use. You may tell this by looking at the instrument cluster lights; the Eco or Power Mode light won’t be on.
We advise against using the maintenance mode while driving unless absolutely necessary. Be extremely cautious when using your vehicle in maintenance mode. Traction and other self-preservation and components will be disabled, and the vehicle will idling. Driving your Toyota Prius while it is in maintenance mode increases the risk of structural and inverter damage.
What is a Toyota Prius’ maintenance schedule?
Toyota typically advises owners to make a service visit every 5000 miles or every six months, whichever comes first.
Why does my maintenance light come on after I change the oil?
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Press and hold the ODO reset / readout button while the engine is off.
- If the car is on, turn it off.
- Now the light will read “MAINT REQD.”
- The ODO display will briefly flash before beginning to display only zeros.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
How can you turn a 2011 Toyota Camry’s tire light back on?
Open the glove box to reveal a reset button that is tucked away beneath a little lip to the left of the glove box. Hold down the button until the TPMS light gently blinks three times.