You must first get inside the 2011 Toyota Highlander and turn the key in the ignition before you can reset the oil change light. If you have an engine start/stop button, press it once after turning the key to the “run” position. As soon as trip meter A appears, push the trip button once again to turn off the engine. Hold the trip button down while supplying the engine with power. A light will start to flash, and then you will see a series of zeros. Once you notice this, you can release the trip button and turn off the engine of the car. Restart it, and everything ought to be alright.
Turn the key to the “run” position and depress the trip meter until trip A appears. (I’m not sure if it needs to be reset because I previously did; to reset trip A, hold the trip meter down until trip A equals 0.0.) Turn off the engine. Hold the trip meter while turning the ignition to run. It will then say something like, “Oil maintenance reset.
Turn the ignition to the “on” position to turn off the oil maintenance light on a 2011 Toyota Highlander. When the odometer display reads “travel meter a,” press and release the trip meter reset stalk. Turn the ignition to the “on” position and press and hold the trip meter reset stalk without starting the car. Watch as the “maint reqd” light goes out.
In This Article...
How can you turn a Toyota Highlander’s oil light back on?
Turn the ignition to position one after inserting your key (the first setting before actually starting the car). Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for another 10 seconds or so.
How is the oil change light reset?
Reset Oil Change Indicator
- Turn on the ignition.
- Both the stop and accelerator pedals should be fully depressed.
- Maintain firm pressure on the brake and accelerator pedals.
- A notice verifying the reset process is ongoing appears after three seconds.
How can you turn a Toyota’s maintenance needed light back on?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
How can I turn off my Toyota’s maintenance light?
Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
Why does my maintenance light come on after I change the oil?
- Now the light will read “MAINT REQD.”
- If the car is on, turn it off.
- The ODO display will briefly flash before beginning to display only zeros.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Press and hold the ODO reset / readout button while the engine is off.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
If it’s filled with oil, why is my oil light on?
Your dashboard will light up to resemble an old-fashioned oil can when your car alerts you to an oil issue. Get to a safe location and shut off the engine right away if the oil light turns on while you are driving. You need to stop driving your car because you might be out of oil. That might result in a breakdown, endangering you and other motorists. Driving while your oil lamp is on and pushing your luck might seriously harm your car’s engine.
If your oil lamp has illuminated, you should check the following:
- Check the oil level after you’ve parked your car in a secure location. The dipstick can be used for this. The dipstick should be removed, cleaned with a cloth, and then reinserted into the car. You can have a low oil issue if the dipstick is dry or has little to no oil on it. Do not restart the engine if this is the case.
- If the oil pressure is low, that could also turn on your oil light. Low oil pressure indicates that the pump isn’t moving enough oil through the system or that there isn’t enough oil for the pump to circulate. Because the oil is crucial to maintaining the lubrication of the surfaces, if the oil light illuminates and the pressure is low, pull over and shut off the engine.
Driving with low oil pressure or low oil levels might damage your car’s engine and eventually cause it to fail. When the oil light comes on while you are driving, stop right away and fix the issue. One danger signal that demands attention is this one!
We encourage you to call Wiygul Automotive Clinic at 1-866-702-8050 if you have any questions.
How soon after an oil change does the oil light turn off?
The oil light suddenly came on. You’re clueless as to why. And to make matters worse, you don’t really have a lot of time right now to worry about it.
How long can you drive with this object is in your face, you ponder. wonderful question We’ll respond to it and explain why it could have initially surfaced. Move along!
How Long Can You Drive With Oil Light On?
If the oil light comes on, you should try to get a repair to look at your car as soon as possible. However, keep in mind that a little more driving around won’t harm anything.
Typically, it takes about two weeks or 500 miles of driving before a flashing oil light becomes a serious issue. However, once that happens, things can quickly deteriorate and cause significant mechanical damage. Therefore, attempt to get your car serviced as soon as possible.
There’s Not Enough Oil in the Car
Numerous issues, including blown head gaskets and broken valves, can cause engines to leak oil. Whatever the case, if oil leaks from your car, it will begin to suffer and may eventually sustain catastrophic damage. As a result, the oil light will turn on when there isn’t enough oil in the vehicle.
The Vehicle’s Oil Pressure Is Low
A vehicle needs enough oil pressure to operate at peak performance. However, keep in mind that a number of things (such as an obstructed oil filter, a broken pressure gauge, insufficient engine oil, etc.) could cause the oil pressure to go too low. This will cause the oil light to come on.
The Oil Pressure Sensor is Malfunctioning
The malfunction of your oil pressure sensor may also cause your oil light to come on. Randomly, this happens, usually as a result of normal wear and tear. If the problem is not corrected, your car won’t have enough oil pressure, which will eventually cause more harm.
The Oil Pump Is Bad
A car’s oil pump may eventually fail as a result of wear and tear on the vehicle. The oil light will unquestionably respond to this. The only option at that point would be to replace the pump since if you don’t, your engine would experience increased friction and end its life much earlier than it should.
Is Your Oil Light Still On?
We have a group of expert vehicle repair specialists who will locate the cause of your check engine light before taking steps to fix it.