How To Reset Oil Life On Toyota Tundra

Toyota / By
  • Choose “Vehicle Settings” from the multi-information display.
  • A maintenance reset is chosen.
  • Select “YES” and hit it.

How can you turn a Toyota’s oil light back on?

In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.

How can you get rid of the need for maintenance?

How do I turn the “Maint Reqd” light back on?

  • Switch the ignition to the ON position.
  • Set the trip display to TRIP A mode on the odometer.
  • Activate the OFF position on the ignition switch.
  • Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
  • It will do so via the service maintenance reminder light.

Why does my maintenance light come on after I change the oil?

  • Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
  • Now the light will read “MAINT REQD.”
  • The ODO display will briefly flash before beginning to display only zeros.
  • If the car is on, turn it off.
  • Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
  • Press and hold the ODO reset / readout button while the engine is off.
  • Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.

What ‘MAINT REQD’ Means

Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.

Need Help?

Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!

How can I turn off the Toyota maintenance is required light?

Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.

How can the oil light on a 2008 Toyota Sequoia be reset?

  • Make sure the tripmeter is lit up on the vehicle’s odometer when the ignition is in the ON position, then switch it to the OFF position.
  • Press and hold the MODE or TRIP reset button.
  • Switch the ignition to the ON position while holding the reset button.

**To activate the Key On/Engine Off mode using the Engine Start/Stop button, depress the button twice while keeping your foot off the brake pedal.

  • Hold the reset button down until the odometer shows “000000 is shown before the initial value.
  • Ensure the reset was acknowledged by turning the vehicle on and off again.
  • Press SETUP on the navigation screen.
  • Press VEHICLE, then MAINTENANCE after that.
  • To reset an item, touch the desired item (i.e. Engine Oil, Oil Filter, Tire Rotation, etc.)
  • Fill in the necessary fields with the new information after this “Following Service period (i.e. date and distance till next service is due)
  • Click OK when finished.
  • Steps 3-5 must be repeated for any additional services rendered.
  • Make that the odometer is shown with the ignition switch in the ON position, then switch it to the OFF position.
  • Hold the reset button down until the odometer shows “the MAINT REQD light flashes, or 000000
  • You can press INFO or SETUP on the navigation screen.
  • Next click MAINTENANCE.
  • Fill up the necessary fields with the new information after this “Next Service Interval (i.e., the day or time till the next service is due)

These reset instructions should be useful to you, we hope. With our mobile app Oil Reset Pro, which is available in the Apple and Google Play stores, you can always have this method at your fingertips along with the rest of the domestic, Asian, and European manual maintenance reset procedures. To get a free download from the shop right away, click the links below.