After every oil change, the Toyota Prius 20102011 needs to have its Oil Change Light Reset. The device won’t be able to accurately track when your next oil change is necessary if it is not reset.
The Toyota Prius 20102011 oil change light reset process is detailed below. After every oil change, reset the oil life monitor by following the instructions below.
In This Article...
Oil Change Light Reset Toyota Prius 2010 2011 Procedure
- Turn the ignition key to the “RUN position or press the “ENGINE START STOP button once.
- Verify the trip meter “A is shown; deactivate the ignition.
- Press the “ENGINE START STOP button once or flip the ignition key to the “RUN position while still holding the trip meter reset button.
- Hold the button down while waiting until “A 000000 is shown.
- Switch off the ignition.
Not Working?
Make sure you are following each step precisely and in the sequence shown in the Oil Change Light Reset Toyota Prius 2010 2011 procedure above if the oil change light reset method isn’t successfully resetting your oil life monitor. Restart your oil light reset method check HERE if this is not how to reset your vehicle’s oil life monitor.
How can you turn a 2011 Toyota’s maintenance light back on?
Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for a further 10 seconds. You can hear a beeping noise in addition to the maintenance light beginning to flash. The light ought should thereafter go out.
How is the oil change light reset?
Reset Oil Change Indicator
- Turn on the ignition.
- Both the stop and accelerator pedals should be fully depressed.
- Maintain firm pressure on the brake and accelerator pedals.
- A notice verifying the reset process is ongoing appears after three seconds.
How can I turn off the Toyota maintenance is required light?
Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
How often should the oil be changed in a 2010 Prius?
One year or 10,000 miles, whichever comes first, is the recommended oil change interval for the 2010 Toyota Prius, for instance. Because some oil life monitors are more advanced than others, the recommended duration will vary depending on the vehicle.
Why, after an oil change, is my maintenance required light still on?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.
Why does my car indicate maintenance is needed following an oil change?
- If the car is on, turn it off.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Press and hold the ODO reset / readout button while the engine is off.
- The ODO display will briefly flash before beginning to display only zeros.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Now the light will read “MAINT REQD.”
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
My oil change light is still onwhy is that?
Let’s move on to the car’s second oil light, the oil pressure light. When this light turns on, it indicates that the engine’s oil pressure has fallen, and you need to act right away. The engine of your car can suffer severe harm if you keep the light on while driving.
The light signifies that something is interfering with the engine’s ability to receive a continuous flow of oil from the oil pump to lubricate its components when it is operating normally. You can consider oil to be the vital component of your car’s engine. Your engine is protected from heat and friction with the right oil level. But without it, your engine can sustain damage quickly. Therefore, it’s crucial to routinely check your oil and filter. You must deal with it if the light comes on. Here is what to do.
- If the dipstick does really show low oil, look for any indications that your car is leaking. A failing gasket or seal may be the cause of oil dripping. If there isn’t an obvious outward oil leak, the engine may have an interior issue.
- To do this, take out the dipstick, clean it with a rag, then put it back in the engine and pull it out again to check the level. The oil level is low if it is below the “full line.” (If you are having difficulties locating the dipstick, refer to your owner manual.)
- Turn off your engine and first pull your car securely to the side of the road.
- Next, locate the engine compartment of your car (often by lifting the hood) and check the oil level.
Purchase the proper oil for your car’s kind and weight, then refuel the engine until the dipstick reads “full.” If the light remains on even after you restart your car, get a professional opinion by calling for a tow truck.
Why is there an exclamation point on a Prius?
Despite not being emergent, these lights suggest that something needs attention or that a system is (un)engaged.
- Warning about Tire Pressure The tire with an exclamation point indicates that you should inflate your tires as soon as possible if one or more of them have fallen below the recommended air pressure limit.
- The light with straight lines indicates the presence of high beams in the headlights.
- Seat Belt Alert
- The person with the seatbelt light informs you that you need to fasten your seatbelt before the car may be operated safely.
- Lack of Fuel
- The gas pump light signals that you are nearing the end of your fuel supply and must quickly find a gas station.
- The gauge with an arrow indicates that your cruise control system is engaged.
Why do Toyota Prius warning lights exist?
Your ABS (Anti-Lock Brakes system) and SRS airbag warning icons are the two safety system lights on your vehicle. When you turn on your Toyota Hybrid, if one of these safety system lights does not illuminate, it implies that they are malfunctioning and that your car needs to be checked out right away.
How can you turn a 2011 Toyota Camry’s tire light back on?
Open the glove box to reveal a reset button that is tucked away beneath a little lip to the left of the glove box. Hold down the button until the TPMS light gently blinks three times.