Find the “trip” button on the right side of the steering wheel in the 2010 Toyota Prius to reset the oil maintenance light. Press it down until “trip A” flashes in the driver information center. “Off” the engine’s power switch by pressing it. Press and hold the “km/mph” button on the driver’s dashboard while you turn the car on. After displaying “re-settings complete,” the DIC will start to recalibrate the oil life. Schedule full synthetic oil and filter changes for your Prius every year or 10,000 miles. To ensure viscosity criteria, use lubricants bearing the Toyota brand or a 0W-20 substitute. In cooler months, thinner oils better coat engine components, minimize friction, and increase fuel efficiency. The typical cost of supplies and labor for a Prius lubrication service is between $115 and $130.
2010 Toyota Prius owners must switch the ignition on, press the trip button, and then turn the ignition off to restart the oil light. Push the km/mph button while holding the brake pedal depressed. Then, press the start button. Hold the km/mph button down until the onboard display indicates that the reset is complete.
By pressing the start button without hitting the brake and holding the mph km / h button, you can turn the ignition “off” to reset the oil light. Hold down the mph, km/h button throughout the reset process until it is finished.
Set trip A on the trip meter while the engine is running. Turn off the system now. Now, turn on the system as usual while touching the brake while maintaining pressure on the MPH button. Display will appear indicating that the meter is being reset. Done. Push the MPH button.
In This Article...
How can you turn off the Prius’s repair needed light?
Turn your key to the second position after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a total of 10 seconds. The light ought to flash, potentially beep, and then go off as a result. Release the odometer button once it has been turned off, then start the automobile.
How is the oil change light reset?
Reset Oil Change Indicator
- Turn on the ignition.
- Both the stop and accelerator pedals should be fully depressed.
- Maintain firm pressure on the brake and accelerator pedals.
- A notice verifying the reset process is ongoing appears after three seconds.
How can you turn a Toyota’s maintenance needed light back on?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
On a 2010 Toyota Corolla, how do you turn off the maintenance is needed light?
Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for around 10 seconds. A buzzer sound and the maintenance light should start to flash. The light ought should thereafter go out.
Tools Needed:
The engine oil funnel is now ready to be installed where your oil cap screws on.
Check the dipstick after adding this amount of oil to see whether you are close to the recommended level. When in doubt, it is preferable to add oil gradually and check frequently as opposed to overfilling.
Remove the funnel once the dipstick’s reading is accurate. You can clean it by wiping it with a rag.
To build oil pressure and fill the oil filter, start your Prius and let it run for a little while. When the dipstick reaches the full mark, turn off your engine and fill off the oil.
How do I stop the needed maintenance?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
Why does my maintenance light come on after I change the oil?
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Now the light will read “MAINT REQD.”
- If the car is on, turn it off.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- The ODO display will briefly flash before beginning to display only zeros.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Press and hold the ODO reset / readout button while the engine is off.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
What does the Toyota Prius’ red triangle mean?
Regular maintenance should be second nature for all car owners, especially since the majority of new automobiles alert us when an oil change is necessary or our tire pressure is low. The “red triangle of doom” on a Toyota Prius, however, resembles the check engine light on conventional combustion engines.
The warning light may just indicate low oil pressure, or it may indicate something more. Your initial course of action should be to have the codes scanned and diagnosed in case your hybrid car is dealing with a more serious problem.
Common Causes
The most frequent reason for a red triangle of death light on a Prius, according to several owners, is a problem with the battery. P0A80 and P3000 are frequently the codes that appear following a diagnostic.
The battery control system of the Prius is identified by the P300 code. This code indicates a fault with the HV battery’s ECU, albeit the reason of the issue is generally complicated. Your Prius may exhibit any of the following symptoms:
Does oil life reset on its own?
How to Reset: As part of the servicing, authorized Honda dealers will automatically reset your Maintenance Minder System. However, you must manually reset the oil life indicator if you execute the oil change yourself or have it done someplace else.
How soon after an oil change does the oil light turn off?
The oil light suddenly came on. You’re clueless as to why. And to make matters worse, you don’t really have a lot of time right now to worry about it.
How long can you drive with this object is in your face, you ponder. wonderful question We’ll respond to it and explain why it could have initially surfaced. Move along!
How Long Can You Drive With Oil Light On?
If the oil light comes on, you should try to get a repair to look at your car as soon as possible. However, keep in mind that a little more driving around won’t harm anything.
Typically, it takes about two weeks or 500 miles of driving before a flashing oil light becomes a serious issue. However, once that happens, things can quickly deteriorate and cause significant mechanical damage. Therefore, attempt to get your car serviced as soon as possible.
There’s Not Enough Oil in the Car
Numerous issues, including blown head gaskets and broken valves, can cause engines to leak oil. Whatever the case, if oil leaks from your car, it will begin to suffer and may eventually sustain catastrophic damage. As a result, the oil light will turn on when there isn’t enough oil in the vehicle.
The Vehicle’s Oil Pressure Is Low
A vehicle needs enough oil pressure to operate at peak performance. However, keep in mind that a number of things (such as an obstructed oil filter, a broken pressure gauge, insufficient engine oil, etc.) could cause the oil pressure to go too low. This will cause the oil light to come on.
The Oil Pressure Sensor is Malfunctioning
The malfunction of your oil pressure sensor may also cause your oil light to come on. Randomly, this happens, usually as a result of normal wear and tear. If the problem is not corrected, your car won’t have enough oil pressure, which will eventually cause more harm.
The Oil Pump Is Bad
A car’s oil pump may eventually fail as a result of wear and tear on the vehicle. The oil light will unquestionably respond to this. The only option at that point would be to replace the pump since if you don’t, your engine would experience increased friction and end its life much earlier than it should.
Is Your Oil Light Still On?
We have a group of expert vehicle repair specialists who will locate the cause of your check engine light before taking steps to fix it.
If it’s filled with oil, why is my oil light on?
Your dashboard will light up to resemble an old-fashioned oil can when your car alerts you to an oil issue. Get to a safe location and shut off the engine right away if the oil light turns on while you are driving. You need to stop driving your car because you might be out of oil. That might result in a breakdown, endangering you and other motorists. Driving while your oil lamp is on and pushing your luck might seriously harm your car’s engine.
If your oil lamp has illuminated, you should check the following:
- Check the oil level after you’ve parked your car in a secure location. The dipstick can be used for this. The dipstick should be removed, cleaned with a cloth, and then reinserted into the car. You can have a low oil issue if the dipstick is dry or has little to no oil on it. Do not restart the engine if this is the case.
- If the oil pressure is low, that could also turn on your oil light. Low oil pressure indicates that the pump isn’t moving enough oil through the system or that there isn’t enough oil for the pump to circulate. Because the oil is crucial to maintaining the lubrication of the surfaces, if the oil light illuminates and the pressure is low, pull over and shut off the engine.
Driving with low oil pressure or low oil levels might damage your car’s engine and eventually cause it to fail. When the oil light comes on while you are driving, stop right away and fix the issue. One danger signal that demands attention is this one!
We encourage you to call Wiygul Automotive Clinic at 1-866-702-8050 if you have any questions.