Your Toyota Tacoma’s maintenance reminder can be reset using one of two techniques. Please adhere to the guidelines listed below in accordance with the trim level of your car.
I just completed changing the oil, and now that I’m back in the car, we’ll reset the maintenance reminder. Using the Trip button, it is simple to reset the maintenance light. Therefore, you should start by:
- To ensure that this device is set to the TRIP A, briefly press the ODO/ TRIP button.
- then extinguish the ignition
- After that, you must continue to depress the ODO/TRIP button in order to restart the vehicle without starting the engine.
- The ODO/ TRIP button should be held down until the maintenance-required light turns off.
- Turn the ignition key to the “run” position or press the START button twice after inserting the key.
In This Article...
How do you turn off the maintenance light on a third-generation Toyota Tacoma?
Press and hold the trip meter reset nob (located next to your Toyota Tacoma’s odometer) to reset the light. Turn the ignition to “ON” while holding the trip meter reset knob, but do not start your Toyota Tacoma. Keep pressing the meter reset button until the MAINT REQD light goes off.
How often should I have my 2018 Toyota Tacoma’s oil changed?
How often should an oil change be performed on a 2018 Toyota Tacoma? One of the most crucial and important services for your car is an oil change. For traditional oil, Toyota advises having your 2018 Toyota Tacoma’s oil and filter replaced every 3,000 to 5,000 miles. Typically, synthetic oil needs to be changed every 7,500 to 10,000 miles.
What does the Toyota Tacoma’s maintenance required light mean?
Even the smallest elements, like dashboard lights, give each car a unique look. Knowing what each light indicates and what to do when one comes on might be challenging. While some lights are merely warnings, others are critical and must not be disregarded. By addressing the query, “What does it signify when the maintenance light is blinking in my Corolla?,” we hope to assist you better understand your Toyota warning lights.
What does the maintenance required light mean?
Other automakers don’t offer a dashboard light like the maintenance required light, which is present on Toyota automobiles (MAINT REQD). Many new Toyota drivers could mistakenly believe that this light is the check engine light, but it actually represents a completely different warning. According to the distance travelled on the vehicle’s maintenance plan, the maintenance required light alerts you that repair is necessary.
What does a 2019 Toyota Tacoma’s maintenance requirement mean?
On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop.
How can the oil life be checked on a 2017 Toyota Tacoma?
Oil Level Check 20162021 Toyota Tacoma SR Extended Cab Pickup 2.7L 4 Cyl.
- Remove Dipstick – Find the oil dipstick, take it out, and clean it.
- Reinstall the dipstick, take it out, and then check the oil level.
- More Information – More details regarding the oil level.
What happens after I change the oil in my car?
Reset Oil Change Indicator
- Turn on the ignition.
- Both the stop and accelerator pedals should be fully depressed.
- Maintain firm pressure on the brake and accelerator pedals.
- A notice verifying the reset process is ongoing appears after three seconds.
Why does my maintenance light come on after I change the oil?
- The ODO display will briefly flash before beginning to display only zeros.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- If the car is on, turn it off.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Press and hold the ODO reset / readout button while the engine is off.
- Now the light will read “MAINT REQD.”
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
What distinguishes a maintenance requirement from a check engine light?
Many people are unsure of what each of these lights means, and the check engine light and the service engine soon light are frequently confused for one another. We’ll describe how distinct they actually are despite the fact that they appear to be similar.
Authored by: Bradley Hayes, Director of Marketing at Autoscope European Car Repair and Automotive Blogger
Since Karl Benz originally unveiled his Benz Patent Motorwagen, automotive technology has advanced significantly. In fact, the notion that computers are essentially controlling our cars in today’s computer-driven society shouldn’t be shocking. In order to assure the precise right operation of your vehicle’s numerous systems and components, they regulate and track their performance. They even notify the driver when the automobile needs repair or maintenance. While technology hasn’t yet given our cars voices (like Kitt from Knight Rider), it has made it possible for them to communicate in other ways, such as through a series of backlit symbols that show up in your instrument cluster, such as a “check engine” and a “service engine” light.
The maintenance light on my 2018 Toyota Corolla needs to be reset.
Put the maintenance light out.
Corolla, Toyota Activate the lock on the “OFF position; do not start the vehicle. the trip reset button next to the odometer is pressed and held until “On the main screen, Trip A may be shown. Reverse the key to “OFF. Turn the key back to the “on” position while pressing the button to reset the trip “position of ON.
How much oil does a 2018 Tacoma require?
For instance, a 4-cylinder engine needs at least 5 quarts of oil, whereas a 6-cylinder engine needs about 6 quarts.
What sort of oil can I use in my 2018 Tacoma?
The 2.7 L engine in the 2018 Toyota Tacoma needs 6.2 q of 0W-20 engine oil. Additionally, 90915YZZD1 Toyota Engine Oil Filter is needed. This engine has four in-line cylinders.
How much oil does a Tacoma V6 require?
The SAE 0w-20 synthetic oil that the Tacoma uses. The 3.5L (211 ci) V6 engine holds 6.1 quarts, whereas the 2.7L (164 ci) 4 cylinder engine stores 6.2 quarts (6.2 with a tow package).