Turn the key back to the “On position after finding the “trip reset button once more. Hold the trip reset button down until your odometer lights 0 miles. The maintenance light will thereafter go out.
In This Article...
How To Turn Off the Toyota Maintenance Required Light
The Toyota Maintenance Required Light can be easily reset, albeit the procedure may differ depending on the model year if it hasn’t already been done by your service specialist. Always refer to your Toyota owner’s manual for a detailed step-by-step procedure.
To navigate settings, use the left or right arrow on the steering wheel.
How can my Toyota maintenance be reset?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
How can I remove Maintenance Minder?
Every time one of the necessary maintenance tasks is finished, such as an oil change, tire rotation, air filter replacement, etc., your Honda Maintenance Minder light needs to be reset. Your maintenance reminder light shouldn’t need to be reset if you have your Honda serviced at a dealership. It should be done for you by the expert who completed your services. However, if you are performing your own maintenance on your Honda or if the technician neglected to reset the light for you, follow these easy steps to do it yourself.
Resting Honda Maintenance Minder Light
Depending on the vehicle, the light resets differently. Depending on the type of car you have, I’ll outline a few possible approaches.
st Method
The trip button is still present on several Honda vehicles, like the civic. This stalk protrudes from your dashboard and is typically used to select the information you wish to appear there or to reset your journeys. The only thing you need to utilize with this technique to turn off the maintenance reminder light is…
Release the trip button after it begins to flash, then press it once more. I’m done now. Now, the oil life ought to read 100%.
nd Method
On the lower right-hand side of the steering wheel of some Honda vehicles, there are up and down arrows with a reset button situated between them. These buttons are located on the steering wheel of some Honda SUVs, such as the Pilot. These are the only three buttons you will need to press when using this method.
In order to see the oil life percentage shown on the dash, press the down arrow button.
Hold down the reset button while waiting for the cancel or reset options to appear on the dash.
Press the up arrow to choose reset. Likewise, choose this option and press the reset button; the oil life should now read 100%.
rd Method
Any Honda trim model that has a touch screen and a home screen should be compatible with this technique.
You’ll be prompted with a screen that asks if you’re sure you want to reset it or not. Resetting should fix the issue. The oil life should read 100% and your maintenance minders should no longer be present.
Follow the link below for a list of maintenance minders and what they signify if you have a maintenance minder light on but are unsure of what it means.
Why does the maintenance required message on my Toyota Corolla?
- If the car is on, turn it off.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Now the light will read “MAINT REQD.”
- Press and hold the ODO reset / readout button while the engine is off.
- The ODO display will briefly flash before beginning to display only zeros.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
On a 2010 Toyota Corolla, how do you turn the maintenance light back on?
Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for around 10 seconds. A buzzer sound and the maintenance light should start to flash. The light ought should thereafter go out.
How can you turn a 2018 Toyota Corolla’s maintenance light back on?
Put the maintenance light out.
Corolla, Toyota
- Put the Corolla’s keys in.
- In order to make “Trip A” appear on the main screen, press and hold the trip reset button next to the odometer.
- Reset the key to “OFF.”
- Turn the key back to the “ON position while pushing the button to reset the trip.
Why does the maintenance required message on my 2017 Toyota Corolla?
On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.
How can my oil life be reset?
- Don’t start the engine; instead, turn the ignition to the ON position to turn on your gauges and electronics.
- Look around the dashboard and gauges of your car for a button, switch, or stick that says “Reset.”
Hold the Reset Button and Turn the Key
- To reset, press and hold the button.
- Keep a close eye on the maintenance or oil change light. It ought to begin to flicker.
- Release the reset button after a brief period of the light blinking ON and OFF, and then turn the ignition OFF.
- Holding down the reset button, turn the ignition back to the ON position.
Start the Vehicle
- Check that the maintenance or oil change light is currently off before starting the engine.
- For more details on the procedure for your vehicle, consult your owner’s manual or the website of the automobile manufacturer if the dashboard light is still ON after two attempts.
- Repeat the reset process if it’s still on.
What does upkeep minder A do?
When an oil change and routine maintenance are required, the Maintenance Minder System employs the on-board computer to continuously monitor the engine’s operating characteristics, including speed, engine temperature, ambient temperature, time, and vehicle use.
Can I drive my automobile even though it needs maintenance?
Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.
This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.
To manually reset the system to turn off the light, however, follow these instructions:
When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.
Why, after an oil change, is my maintenance required light still on?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.
Is the check engine light the same as the maintenance necessary light?
Some motorists could mistake the check engine light for the service or maintenance necessary light on the instrument cluster. These alert lights are not connected. The service required light simply indicates that the vehicle needs an oil change or other standard maintenance.